FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M8 x 60 | m 8.0 x 60.0mm grade 8.8zinc plt hex cap screws full thread din 933 | 800 |
|
| Century | FL | Captive Panel Screws | Steel | Zinc/Yellow | M3 x 8 | asm 1830-8-s-31a m3 x 8 captive screw steel zinc yellow plate e2c | 20 |
|
| Century | FL | m45938/7-4p | 34 |
| ||||
| Century | FL | Slotted Spring Pin (Roll Pin) | Steel | Plain / Furnace Black | 5/32 x 7/16 | 5/32 x 7/16 roll pin steel | 225 |
|
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 3/8 x 1 1/2 | 3/8x1-1/2 sae hhcs gr5 | 1 |
| |
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/8 x 5 | 7/8x5 uss gr5 hhcs z/p | 27 |
|
| Century | FL | Flat Washer | Teflon (PTFE) | Plain / Furnace Black | .265 x .50 x .063 | hw5479 .265 id x .50 od x .063 tk flatwasher teflon(ptfe) material | 700 |
|
| Century | FL | Machine Screw | Steel | Cadmium/Yellow | #6-32 x 1 1/2 | nas601-24b screw machine | 12414 |
|
| Century | FL | Shim Washer (Round, Slotted, Square etc.) | Plain / Furnace Black | raf 1221-8-al-6 shim | 19 |
| ||
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 3/8 x 4 | 3/8x4 sae gr5 hhcs | inquire |
| |
| Century | FL | Thread-Locking Compounds | loctite 27731 50ml (1.69 oz) red | 19 |
| |||
| Century | FL | Gaskets | parker hannifin b3-107-1 rev.b gasket outlet | 24 |
| |||
| Century | FL | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Black | #6 | #6 ext l/w steel zinc black | 12300 |
|
| Century | FL | m25988/3-134 | 560 |
| ||||
| Century | FL | Electrical Lugs & Terminals | samtech tsw-106-07-l-s connector male pwb | 66 |
| |||
| Century | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4 x 40 | m 4.0 x 40.0mm 18-8 flat hd soc hd cap screws din 7991 | 976 |
|
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #2-56 x 1/2 | 2-56 x 1/2 socket cap 18-8 black ox | 12080 |
|
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 5/16 x 2 1/2 | 5/16x2-1/2 sae hhcs gr5 | 77 |
| |
| Century | FL | Shoulder Bolt (Stripper Bolt) | Plain / Furnace Black | ms51975-35 | 10 |
| ||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | ms28775-108 | 404 |
| |||
| Century | FL | nas43ht3-12a | 500 |
| ||||
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M3.5 x 25 | m3.5 x 25 pozi pan taptite stl trivalent zinc clear bake & wax din 7500c | 11606 |
|
| Century | FL | External Type E Retaining Ring (E-Clip) | Aluminum | Zinc/Green | parker hannifin 010007-6-g rev e color ring aluminum green q2b rev e | 11000 |
| |
| Century | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1.640 x 2.375 x .032 | nas1149c2632r washer flat | 60 |
|
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 1/4 x 3/4 | 1/4x3/4 sae hhcs gr5 | inquire |
| |
| Century | FL | Flat Washer | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 3/16 | nas1149e0563r washer flat | 1100 |
|
| Century | FL | Machine Screw | Steel | Black Oxide | #4-40 x 1/2 | ms004c0032pflt02bx 4-40 x 1/2 phillips flat head steel black ox | 10891 |
|
| Century | FL | Machine Screw | Steel | Black Oxide | #10-24 x 1/4 | 10-24x1/4 phillips flat uc mach screw blk ox 10-24x1/4 phillips flat undercut head machine screw steel/black ox | 10850 |
|
| Century | FL | Socket Head Cap Screw | null | Plain / Furnace Black | nas1352c047p cap screw socket head | 850 |
| |
| Century | FL | Socket Head Cap Screw | null | Plain / Furnace Black | nas1352c048p cap screw socket head | 2000 |
| |
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 1/4 x 1 1/4 | 1/4x1-1/4 sae hhcs gr5 | 8 |
| |
| Century | FL | Machine Screw | Plain / Furnace Black | #12 | ms9208-12 screw cap 12-point | 1650 |
| |
| Century | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #6-32 x 1/8 | mhw010-062a rev2 6-32 x 1/8 soc set screw cup pt ss pass qq-p-35 tyii l3 technologies mhw010-062a | 9650 |
|
| Century | FL | s-10536 padded envelope 8-1/2 x 14-1/2 100 pcs per case this item is sold per envelope uom= ea envelope packed 100 per case!! u-line s-10536 | 10115 |
| ||||
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 1/4 x 2 1/2 | 1/4x2-1/2 sae hhcs gr5 | 15 |
| |
| Century | FL | null | ms16631-3193 | 50 |
| |||
| Century | FL | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Yellow | 5/16 | shakeproof 1218-00-000551b 5/16 int tooth lock washer steel zi & yel zinc/yellow | 8235 |
|
| Century | FL | Machine Screw | Steel | Zinc/Yellow | 1/4-20 x 5/8 | 1/4-20 x 5/8 phillips truss hd-ms steel trivalent zinc yellow | 10070 |
|
| Century | FL | carleton 19571 spring helical | 500 |
| ||||
| Century | FL | Signs & Labels | label connection diagram ed | 500 |
| |||
| Century | FL | Machine Screw | Class 8.8 | Zinc/Clear | M6 x 16 | m6 x 16 6-lobe flat machine screw class8.8 zinc clear rohs and bake iso 14581 | 500 |
|
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 1/4 x 3 | 1/4x3 sae hhcs gr5 | 94 |
| |
| Century | FL | Sealing Washer, Sealing Ring | Plain / Furnace Black | 1/4 | 1/4 seal washer | 500 |
| |
| Century | FL | Cord & Cable Grips | M25 | om-25-bn sealo-ring 25mm cord grip bun e2a | 500 |
| ||
| Jackson | MS | Set Screw (Square Head) | Steel | Plain / Furnace Black | 3/8 x 5 1/2 | nc square set | 38 |
|
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Plain / Furnace Black | 1 1/8-7 | tpix2 3/8 b-7 hex c/s | 16 |
|
| Jackson | MS | 12 Point Flange Screw (CounterBore) | Steel | Plain / Furnace Black | 5/8-11 x 2 | nc ferry c/s | 59 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 5/8 x 1 1/2 | nc l-9 hex c/s | 170 |
|
| Jackson | MS | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade 9 | Plain / Furnace Black | 5/16 | nc l-9 stover top loc nuts | 879 |
|
| Jackson | MS | Hex Jam Nut | Steel | Plain / Furnace Black | 1 3/8-12 | nf hex jam nut | 108 |
|
| Jackson | MS | Machine Bushings | Steel | Plain / Furnace Black | 2 1/8 x 3 1/8 x 14 | 2 1/8 idx3 1/8 odx14 gauge machine bushing pl | 202 |
|
| Jackson | MS | Eye Bolt | Steel | Plain / Furnace Black | 1/4 x 1 | #21 eye bolt forged shoulder pattern dom.. | 49 |
|
| Jackson | MS | Hex Machine Bolt | Steel | Plain / Furnace Black | 3/4 x 14 | nc hex m/b a307 with 6 rt | 121 |
|
| OneMonroe | NC | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 1/2-13 x 3/4 | 1/2-13 x 3/4 black oxide alloy steel cone point socket set screw | 100 |
|
| OneMonroe | NC | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 1/2-13 x 5/8 | 1/2-13 x 5/8 black oxide alloy steel half dog point socket set screw | 50 |
|
| OneMonroe | NC | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 1/2-13 x 1 | 1/2-13 x 1 black oxide alloy steel half dog point socket set screw | 76 |
|
| OneMonroe | NC | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 1/2-20 x 1 1/4 | 1/2-20 x 1-1/4 black oxide alloy steel cup point socket set screw | 69 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | #5-40 x 5/8 | 5-40 x 5/8 flat soc cap screw | 100 |
|
| OneMonroe | NC | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #5-40 x 5/8 | 5-40 x 5/8 soc set-cup pt stainless | 500 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 3/4-16 x 8 | nf socket hd cap | 31 |
|
| Jackson | MS | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/4 x 3 | nc skt set cup point 18-8 304 | 8 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 7/16-14 x 4 | nc socket hd cap | 231 |
|
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Zinc/Clear | 1/4 x 1 | nc b-7 hex c/s | 796 |
|
| Jackson | MS | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 1/2-13 | 1/2-13 nc heli-coil inserts | 153 |
| ||
| Jackson | MS | Shoulder Bolt (Stripper Bolt) | Steel | Plain / Furnace Black | 5/8 x 2 3/4 (1/2-13) | socket stripper bolt | 92 |
|
| OneMonroe | NC | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 1/2-20 x 1 1/2 | 1/2-20 x 1-1/2 black oxide alloy steel cup point socket set screw | 38 |
|
| OneMonroe | NC | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 1/2-20 x 1/2 | 1/2-20 x 1/2 black oxide alloy steel flat point socket set screw | 43 |
|
| OneMonroe | NC | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 5/8-11 x 7/8 | 5/8-11 x 7/8 black oxide alloy steel cup point socket set screw | 20 |
|
| OneMonroe | NC | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 1/2-20 x 7/8 | 1/2-20 x 7/8 black oxide alloy steel cup point socket set screw | 75 |
|
| OneMonroe | NC | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | #5-40 x 3/4 | 5-40 x 3/4 flat soc cap screw | 235 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | #5-40 x 3/4 | 5-40 x 3/4 phillips flat m/s plated | 523 |
|
| OneMonroe | NC | Socket Head Cap Screw | Steel | Plain / Furnace Black | #5-40 x 7/8 | 5-40 x 7/8 socket cap screw | 68 |
|
| Jackson | MS | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6 | mini eff. range 5/16 wide 7/8 range all 18-8 304 hose clamp 300 series ss | 362 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 3/4-10 x 4 | nc socket hd cap | 104 |
|
| Jackson | MS | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 5/8 | external tooth l/w | 2429 |
|
| Jackson | MS | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4 x 4 | nc socket hd c/s 18-8 s/s | 291 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain / Furnace Black | M24-3.00 x 200 | hex c/s partially threaded | 64 |
|
| Jackson | MS | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 5/8 | nc heavy insert nu series | 439 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #10-24 x 1 | flat slotted m/s | 3000 |
|
| Jackson | MS | High Collar Split Lock Washer | Steel | Plain / Furnace Black | 7/16 | high collar lock | 3442 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain / Furnace Black | M10-1.50 x 55 | hex c/s partially threaded | 392 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain / Furnace Black | M6-1.00 x 20 | hex c/s f/t | 1805 |
|
| OneMonroe | NC | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 9/16-12 x 5/8 | 9/16-12 x 5/8 black oxide alloy steel cup point socket set screw | 71 |
|
| OneMonroe | NC | Pipe Plugs (Socket) | Black Oxide | 1/4-18 | 1/4-18 npt dry-seal pipe plug st blk ox | 1770 |
| |
| OneMonroe | NC | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #20 x 1 | -20 x 1 6-lobe pan tcs ty f znc bake | 2300 |
|
| OneMonroe | NC | Hex Head Cap Screw | Grade 8 | Cadmium/Yellow | 1/4-20 x 1 | 1/4-20 x 1 hex cs w/pat import gr8 cadyl | 228 |
|
| OneMonroe | NC | Set Screw (Square Head) | Steel | Plain / Furnace Black | 1/4-20 x 1 | 1/4-20 x 1 sq hd set screw | 99 |
|
| OneMonroe | NC | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Steel | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x 1 one-way round m/s plated | 16 |
|
| OneMonroe | NC | Machine Taps | Steel | 5-40 | 5-40 plug tap | 12 |
| |
| Jackson | MS | Elevator Bolt | Steel | Zinc/Clear | 1/4 x 2 1/2 | e/b | 726 |
|
| Jackson | MS | Hex Head Cap Screw | Brass | Plain / Furnace Black | 5/16 x 4 | nc hex c/s | 58 |
|
| Jackson | MS | USS Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .257 x .750 x .062 | 1/4 .257 idx.750 odx.062 thk USS flat natural white color | 4746 |
|
| Jackson | MS | Lock Nut, Nylon Insert | Steel | Plain / Furnace Black | 1/4 | nc hex nut | 1645 |
|
| Jackson | MS | Electrical Lugs & Terminals | 12-10 | stud size 10 block spade non flanged vinyl | 200 |
| ||
| Jackson | MS | Machine Taps | #8-32 | nc taper tap (starter tap) | 39 |
| ||
| Jackson | MS | Split Lock Washer | Silicon Bronze | Plain / Furnace Black | 1/2 | lock split | 90 |
|
| Jackson | MS | Plow Bolt, Scraper Blade Bolt | Steel | Plain / Furnace Black | 7/16 x 1 1/2 | pl/b clipped | 1124 |
|
| Jackson | MS | Thumb Screw (Shoulder) | Steel | Zinc/Clear | #10-32 x 2 | nc plain pattern thumb type p no shoulder | 819 |
|
| Jackson | MS | Set Screw (Socket Head) | Steel | Plain / Furnace Black | 1/2 x 3 1/2 | nc socket set cup point | 192 |
|
| OneMonroe | NC | Machine Screw | Brass | Plain / Furnace Black | 1/4-20 x 1 | 1/4-20 x 1 slottedflat m/s brass | 384 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x 1 slottedflat m/s pkg plated | 250 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x 1 slottedflat m/s plated | 2 |
|
| OneMonroe | NC | Machine Screw Nut | Steel | Plain / Furnace Black | #5-40 | 5-40 machine screw nut small pattern | 2600 |
|
| OneMonroe | NC | Machine Screw Nut | Steel | Zinc/Clear | #5-40 | 5-40 machine screw nut plated | 6800 |
|
| Jackson | MS | Double End Stud | Grade B7 | Plain / Furnace Black | 5/8-18 x 1 x 5/8 18 | stud double end b7 cut thread 5/8x2 3/4oal 5/8-18x1 finex5/8-18x1 3/8 fine | 30 |
|
| Jackson | MS | Hex Jam Nut | Steel | Zinc/Clear | 1/2-20 | nf hex jam center l/nut | 1660 |
|
| Jackson | MS | Plate Washer (Square & Rect.) | Steel | Plain / Furnace Black | 3 x 3 x 1/4 | thick for 5/8 dia square plate hole id 11/16 finish | 69 |
|
| Jackson | MS | U-Bolt | Steel | Galvanized | 1/2 x 5 5/8 x 7 1/4 | u-bolt hot dip 5 pipe #029hg | 98 |
|
| Jackson | MS | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | well nut 10-32 .375 dia .030-.227 grip range | 200 |
| |||
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain / Furnace Black | M20-2.50 x 50 | hex c/s f/t | 486 |
|
| Jackson | MS | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 5/16 | nc heavy insert nu series | 2754 |
|
| Jackson | MS | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | 7/8-9 | 7/8-9 nc flex lock nut 1.25 waf 1.00 tall | 54 |
|
| Jackson | MS | Coil Nut | Steel | Plain / Furnace Black | 1/2 | hex coil thread nut | 249 |
|
| OneMonroe | NC | Machine Screw | Brass | Plain / Furnace Black | 1/4-20 x 1 | 1/4-20 x 1 slottedovalal m/s brass | 1 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x 1 slottedpan m/s plated | 144 |
|
| OneMonroe | NC | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 | 1/4-20 x 1 slotted hex wash hd m/s 18-8ss | 25 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x 1 phillips round hd m/s stl znc | 1455 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x 1 slotted pan hd m/s stl znc | 996 |
|
| OneMonroe | NC | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 1/4-20 x 10 | 1/4-20 x 10 1/2 hex cap screw gr 5 | 20 |
|
| OneMonroe | NC | Self-Tapping Drive Screw (type u) | Steel | Zinc/Yellow | #4-7 x 1.950 | 4-7x1.950 combo #1 sq drive sl pan hd ty u drive screw stl hard zinc & yellow dichromate per print | 22000 |
|
| OneMonroe | NC | Self-Tapping Drive Screw (type u) | Steel | Zinc/Yellow | #6-7 x 1 1/4 | 6-7x1.250 combo #1 sq drive sl pan hd ty u drive screw stl hard & zinc trivailant yellow dichromate per print | 3500 |
|
| Jackson | MS | Heavy Hex Jam Nut | Nylon (Polyamide) | Zinc/Clear | 3/4 | 3/4-10 nc zinc nylon heavy thinjam nut ntu, domestic green insert greer smyrna domestic | 183 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/8 x 7 1/2 | nc hex c/s | 37 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/4-12 x 7 | nf hex c/s | 1 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 3/4 | hex trim unslotted 18-8 s/s | 2000 |
|
| Jackson | MS | Toggle Wings | Steel | Zinc/Clear | 3/16 | (10-24) toggle wing | 1387 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain / Furnace Black | M30-3.50 x 200 | hex c/s partially threaded | 14 |
|
| Jackson | MS | Set Screw (Square Head) | Steel | Plain / Furnace Black | 1/2 x 1 3/4 | nc square set | 435 |
|
| Jackson | MS | Eye Bolt | Steel | Plain / Furnace Black | 1/2-13 x 5 | turned eye bolt teardrop style 1 3/8 id 2 thread 5 from under eye | 47 |
|
| OneMonroe | NC | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 1/8 | 1/4-20 x 1 1/8 hex c/s 18-8ss | 50 |
|
| OneMonroe | NC | Socket Head Cap Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/8 | 1/4-20 x 1 1/8 soc capscrew zinc pltd | 68 |
|
| OneMonroe | NC | Hex Tap Bolt (Fully Threaded) | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 1 1/8 | 1/4-20 x 1 1/8 hex tap bolt t-316ss | 40 |
|
| OneMonroe | NC | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 carriage bolt 18-8ss | 100 |
|
| OneMonroe | NC | Carriage Bolt | Steel | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 carriage bolt black | 5 |
|
| OneMonroe | NC | Wood Screw | Brass | Plain / Furnace Black | #5 x 5/8 | #5 x 5/8 phillips flat w/s brass | 400 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4 x 1 | nc pan phillips m/s 18-8 304 | 2185 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain / Furnace Black | 1-8 x 7 | nc socket hd cap | 1 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain / Furnace Black | M24-3.00 x 150 | hex c/s partially threaded | 13 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8-11 x 6 | nc hex tapp bolt 18-8 ss f/t | 9 |
|
| Jackson | MS | Step Drill Bits (Unibit etc.) | #1 | (1/8-1/2) bit unibit step drill bright usa | 27 |
| ||
| Jackson | MS | Hairpin Cotter Pin (Bridge Pin, R-Clip) | Steel | Zinc/Clear | #225 .072 x 1 3/32 | oal hair pin clip ( hitch) | 7118 |
|
| Jackson | MS | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-20 x 1/2 | nf skt set cup point 18-8 304 | 118 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-1.50 x 45 | h/b a-2 18-8 304 f/t | 73 |
|
| Jackson | MS | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 9/16-18 | nf insert locknut ne | 680 |
|
| Jackson | MS | Carriage Bolt | Grade 5 | Zinc/Clear | 3/4 x 2 1/2 | nc c/b | 116.6 |
|
| Jackson | MS | Plow Bolt, Scraper Blade Bolt | Grade 5 | Zinc/Clear | 7/16 x 2 | oversize pl/b gr.5 | 618 |
|
| OneMonroe | NC | Hex Tap Bolt (Fully Threaded) | Grade 5 | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 tap bolt gr 5 plated | 594 |
|
| OneMonroe | NC | Hex Tap Bolt (Fully Threaded) | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 tap bolt 316 stainless | 19 |
|
| OneMonroe | NC | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 hex cap screw 316 | 81 |
|
| OneMonroe | NC | Hex Head Cap Screw | Steel | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 hex c/s sil bnz | 100 |
|
| OneMonroe | NC | Machine Screw | Brass | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 slottedround m/s brass | 129 |
|
| OneMonroe | NC | Machine Screw | Brass | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 slottedround m/s brass | 110 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 slottedround m/s plated | 7 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 round hd m/s stl znc | 950 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5 | metromax i q polymer caster. 5 swivel caster with break consisting of polyurethane wheel all-polymer horn stainless steel axle and hardware. | 12 |
| |
| OneMonroe | NC | L-Wrenches, Allen Wrenches & Torx Wrenches | .050 | .050 long arm hex key | 85 |
| ||
| OneMonroe | MN | Knobs & Star Grips | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4-20 x .50 | 5 lobe knob 1/4-20 x .50 ss | 16 |
| |
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Plain / Furnace Black | 7/8 x 4 | nc b-7 hex c/s | 347 |
|
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Plain / Furnace Black | 5/8 x 1 1/2 | nc b-7 hex c/s | 230 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 2 | Galvanized | 7/8 x 22 | nc hex c/s hot dip | 16 |
|
| Jackson | MS | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8 x 8 | nc hex c/s 18-8 ss | 14 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | Grade 5 | Zinc/Clear | 3/8-16 x 3 1/2 | nc t/b | 371 |
|
| Jackson | MS | Plow Bolt, Scraper Blade Bolt | Grade 5 | Zinc/Clear | 7/16 x 1 | #3 pl/b gr. 5 unc | 800 |
|
| Jackson | MS | 12 Point Flange Screw (CounterBore) | Steel | Plain / Furnace Black | 5/8-11 x 2 1/4 | nc ferry c/s | 80 |
|
| Jackson | MS | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M12-1.75 x 40 | socket cap a-2 ss | 250 |
|
| OneMonroe | NC | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 slottedflat m/s pkg plated pkg qty 100 carton 26 | 100 |
|
| OneMonroe | NC | Machine Screw | Brass | Plain / Furnace Black | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 slottedround m/s brass | 4 |
|
| Endries | WI | Hex Head Cap Screw | Brass | Plain / Furnace Black | 3/8-16 x 5/8 | 3/8-16x5/8 brass hex head cap screw | 50 |
|
| Endries | WI | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20x1-1/4 18-8 s/s steel phillips truss head machine screw | 1000 |
|
| Endries | WI | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10 x 60 | M10x60 a2 18-8 304 socket head cap screw din 912 | 188 |
|
| Endries | WI | Shoulder Bolt (Stripper Bolt) | Class 12.9 | Plain / Furnace Black | M8 x (M6-1.00) | 10x50 class 12.9 f9 shoulder tolerance socket shoulder screw m8 thread plain iso 7379 | 4 |
|
| Endries | WI | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #10-32 x 1/4 | ms24693-c268 10-32x1/4 18-8 304 steel phillips 100 degree flat machine screw 304ss | 7 |
|
| Endries | WI | Machine Screw | Grade 5 | Plain / Furnace Black | #10-32 x 8.69 | 10-32x8.69 grade 5 hex head machine screw plain w/1.75 minimum thread | 63 |
|
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Plain / Furnace Black | 3/8 x 1 1/2 | nc b-7 hex c/s | 665 |
|
| Jackson | MS | Finished Hex Nut | Steel | Zinc/Clear | 3-12 | nf hex nut | 5 |
|
| Jackson | MS | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M12-1.75 x 50 | hvy hex fl/b j1199 | 225 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Yellow | 3/4-10 x 5 1/4 | b7 stud and | 112 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain / Furnace Black | 1-8 x 11 | b7 stud | 25 |
|
| Jackson | MS | Finished Hex Nut | Steel | Plain / Furnace Black | M10-1.50 | l.h. nut | 67 |
|
| Jackson | MS | Shoulder Bolt (Stripper Bolt) | Steel | Plain / Furnace Black | 7/16 x 1 1/2 (5/16-18) | socket stripper bolt | 9 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | #12-24 x 3/8 | nc hex washer slotted indented m/s | 4861 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 5/16 x 1 | nc hex c/s | 1 |
|
| Jackson | MS | Machine Screw | Steel | Plain / Furnace Black | #6-40 x 7/16 | cad round phillips m/s | 8208 |
|
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | 3/8 x 5/8 | nc hex unslotted indented m/s | 1185 |
|
| Jackson | MS | Cotter Pin (Split Pin) | Steel | Plain / Furnace Black | 5/8 x 3 | 201 |
| |
| Jackson | MS | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 5/16 x 1 1/2 | nc hex c/s | 495 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1/4 x 1 1/2 | nc hex c/s | 8320 |
|
| Jackson | MS | Cotter Pin (Split Pin) | Steel | Plain / Furnace Black | 9/16 x 3 5/8 | 182 |
| |
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | Grade 5 | Galvanized | 3/4-10 x 4 | nc t/b hdg | 43 |
|
| Jackson | MS | Cotter Pin (Split Pin) | Steel | Plain / Furnace Black | 3/64 x 1/2 | 30585 |
| |
| Jackson | MS | Carriage Bolt | Grade 5 | Zinc/Clear | 3/4 x 7 | nc c/b full body | 51 |
|
| Jackson | MS | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Zinc/Clear | 5/8 x 1 1/4 | nc a325 h/b with pellet | 70 |
|
| Jackson | MS | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 1/2-12 x 14 | nf hex c/s | 3 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
