FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| SWACO | OH | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16 | 13212-ss-1032-7 amatom handle 5/16 round offset type | 27 |
| |
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | m25988/1-252 bulk packaged | 150 |
| |||
| Century | FL | Protective Caps & Plugs | M3 | 3m 4270-6r cap protective | 75 |
| ||
| Century | FL | Handles | Aluminum | raf 8254-440-a handle alum | 76 |
| ||
| Jackson | MS | Grease Fittings | aerosol 10 oz electrical silicone lube crc#002094 | 9 |
| |||
| Jackson | MS | Grease Fittings | aerosol degreaser fast dry 14 oz crc #02185 | 8 |
| |||
| Jackson | MS | Grease Fittings | aerosol red grease lubricant 11 oz crc #03079 | 16 |
| |||
| Jackson | MS | Grease Fittings | aerosol quick clean degreaser 19 oz can crc#03180 | 14 |
| |||
| Jackson | MS | Grease Fittings | 20 | oz. aerosol heavy duty degreaser chemical products #03180 | 11 |
| ||
| Jackson | MS | Grease Fittings | 12 | oz. aerosol white lithium lube chemical products #30324 | 2 |
| ||
| Jackson | MS | Nails | Nylon (Polyamide) | 1/4 x 3 | mushroom head nail anchor | 97 |
| |
| Jackson | MS | Grease Fittings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/8 | pipe thread straight grease fitting individual 18-8 304 | 10 |
| |
| Jackson | MS | Grease Fittings | 1/8 | pipe thread 30 degree angle grease fittingindividual | 71 |
| ||
| Jackson | MS | Grease Fittings | 1/8 | degree pipe thread grease fitting individual | 633 |
| ||
| Jackson | MS | Grease Fittings | 1/8 | pipe thread 65 degree grease fitting individual | 250 |
| ||
| Jackson | MS | Grease Fittings | 1/8 | degree pipe thread grease fitting individual | 1176 |
| ||
| Jackson | MS | Grease Fittings | 1/8 | pipe thread straight grease fitting individual | 1441 |
| ||
| Jackson | MS | Grease Fittings | 1/8 | straightx1 1/4 long grease fitting individual | 115 |
| ||
| Jackson | MS | Grease Fittings | 1/8npt | 1/8 npt straightx1 3/4 extra long grease fitting individual h1669 | 140 |
| ||
| Jackson | MS | Grease Fittings | 1/8npt | 1/8 npt pipe thread straight grease fitting individual short 19/32 height equal to alemite # 1644-b | 108 |
| ||
| Jackson | MS | Grease Fittings | 3/16 | drive in (#10) grease fitting individual | 343 |
| ||
| Jackson | MS | Grease Fittings | 3/16 | degree drive in grease fitting individual | 79 |
| ||
| Jackson | MS | Grease Fittings | 1/4-28 | degree grease fitting individual | 123 |
| ||
| Jackson | MS | Grease Fittings | 1/4-28 | degree grease fitting individual | 1109 |
| ||
| GLF | OH | Protective Caps & Plugs | Steel | 3/4 x 20 | 3/4 x 20 fish wire tool stl pln-coiled into circle with silicone cap | 4628 |
| |
| GLF | OH | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain | 3/4 x 1/4 x 1 1/16 | 3/4 x 1/4 x 1-1/16 x 1-3/8 x 9/16 rubber grommet | 10 |
|
| GLF | OH | Protective Caps & Plugs | Plastic | cap assembly an929-4d | 2 |
| ||
| Jackson | MS | Nails | 3/8 x 8 | nail bright spike 50lb ctn. weighs .247/ea | 2 |
| ||
| OneMonroe | MN | Brackets & Supports | Painted | center bracket painted | 2 |
| ||
| OneMonroe | MN | Handles | handle stub | 76 |
| |||
| OneMonroe | MN | Brackets & Supports | 300 Stainless (A1,A2, 18-8,304,310 etc.) | metro direct wall mount bracket six bottom brackets mat stainless steel | 1 |
| ||
| OneMonroe | MN | Protective Caps & Plugs | Nylon (Polyamide) | 1 | black nylon locking hole plug 1 (50/per) | 2 |
| |
| OneMonroe | MN | Storage Bins | 7 3/8 | 7-3/8 l x 4-1/8 w x 4 h yellow bin | 50 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 2 5/8 x 3 5/8 | caster swivel-plate wheel size 6 x 2 wheel mat round grey tread rubber on polyolefin bearing roller load ht 7-1/2 top plate size 4 x 4-1/2 bolt hole ptrn 2-5/8 x 3-5/8 to 3 x 3 load cap 500 lbs temp rt-45 to +180 f |
| |
| OneMonroe | MN | Hinges | foac lh hinge | 1 |
| |||
| OneMonroe | MN | Hinges | full mortise hinge-prime coat finish | 5 |
| |||
| OneMonroe | MN | Handles | Plain | inside locking handle-lh black & chrone finish | 1 |
| ||
| OneMonroe | MN | Hinges | 96 | 96 continuous hinge | 11 |
| ||
| OneMonroe | MN | Knobs & Star Grips | Nylon (Polyamide) | Plain | 1/4-20 | 1/4-20 black nylon wing thumb knob | 1450 |
|
| OneMonroe | MN | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | 8 x 3 | wheel sz 8 x 3 mat poly foam never-flat bearing radial ball bearing bore 1/2 bore less bearing 1-3/8 hub length 3 offsett load cap 300 lbs temp rt-40 to +180 f | 4 |
|
| OneMonroe | MN | Latches & Catches | ventlok sash latch | 6 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | caster/swivel/03x13/16 tpr wheel/pb/7/16 fr stem/brk/90# | 58 |
| |||
| OneMonroe | MN | Staples | swivel staple safety hasps | 4 |
| |||
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Ni-Cu Alloy (Monel, K-Monel, etc.) | 3/8 | 3/8 fw monel .88 +/-.01 x .40 +/-.01 x .124 +/-.01 spec ms29 | 3 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 14 |
| |||
| OneMonroe | MN | Latches & Catches | latch | 1 |
| |||
| OneMonroe | MN | Hinges | 4 1/2 x 4 | 4-1/2 x 4 spring hinge-each | 38 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | caster/swivel/04x1-1/2 poly-olefin wheel/rb/plate/400# | 16 |
| |||
| Alma Bolt | MI | Knobs & Star Grips | Plastic | Plain | 3/8-16 x 2 | 3/8-16 x 2 stud 5 lobe black plastic knob | 22 |
|
| Bossard | AZ | Handles | pocket pull flush handle southco | 376 |
| |||
| Bossard | AZ | Gaskets | emi gasket 1.15 | 10800 |
| |||
| Bossard | AZ | Springs (Compression) | compression spring od 0.180 | 747 |
| |||
| Optimas | IL | Springs (Compression) | 400 Stainless (405, 410,416,420,430 etc.) | .420 x 3/4 | .420 od x 3/4 free lgth x .042 wire dia compression spring ss | 171 |
| |
| Optimas | IL | Grommets & Eyelets | Plain | 3/4 | 5/16 id x 1.000 od x 3/8 thk push-in round grommet sbr black 55a 3/4 hole x 1/8 panel thickness tmpi clean | 19 |
| |
| Optimas | IL | Protective Caps & Plugs | Plastic | Plain | 5/8 | 5/8 round tubing plug black polyethylene ppap | 17505 |
|
| Empower H | IL | Grommets & Eyelets | Steel | Zinc/Clear | 24 | 2451zp-0716zinc plated steel spring snap with grommet eye #2451size (wire diameter) 7/16 11mmoverall length 4-3/4 opening size 5/8 working load limit (lbs) 500 | 100 |
|
| AFT Faste | TX | Latches & Catches | Steel | kipp latch with pull bar 3.8 mm borehole steel style b (1/pkg.) k0045.2641351 | 5 |
| ||
| AEROSPCE | MN | Protective Caps & Plugs | pf12-m4-2 pem slot/phillips-smooth cap panel fast | 1500 |
| |||
| AEROSPCE | MN | Handles | p2-41 southco pocket pull flush handle small | 81 |
| |||
| AEROSPCE | MN | Protective Caps & Plugs | pf11-m4-0 pem slot/phillips-knurled cap panel fast | 36 |
| |||
| Jackson | MS | Protective Caps & Plugs | Plastic | polyethelyn fin. plug 1-1/4 snap in special order part | 100 |
| ||
| National | Ont | Knobs & Star Grips | Resin (Phenolic, etc.) | Plain | 3/8-16 | 3/8-16 phenolic ball knob 1 od | 1190 |
|
| Mansco | MI | Latches & Catches | 15.3 | mm longx11mm widex7mm thk push latch | 200 |
| ||
| Mansco | MI | Hinges | hinge t-type glissando 120 id c0 45 screw-on 1467.06 (701.0ut0.054.00) | 3815 |
| |||
| Global Fa | TX | Latches & Catches | snap-in touch latch southco e4-10-103-10 | 6 |
| |||
| Global Fa | TX | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | .320- x .562 x .250 | .320x.562x.250 sshandle/ferrule | 16 |
| |
| Olander | CA | Latches & Catches | southco comp latch | 1 |
| |||
| Olander | CA | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3/16 rd x 5 l x 5/8 h handle sst rohs | 10 |
| ||
| Jackson | MS | Nails | Steel | Galvanized | .092 x 2 | wire collated flat coil ring shank nails h.d.g. (3 000 per box) | 12000 |
|
| Jackson | MS | Nails | Steel | Galvanized | .092 x 2 3/16 | wire collated flat coil ring shank nails h. d.g. (3 000 per box) | 6000 |
|
| Jackson | MS | Nails | Steel | Galvanized | 9 | gaugex1-1/2 joist hanger nail h.d.g. (sold by the 50 lb. carton) | 3 |
|
| Jackson | MS | Nails | Plastic | Plain | 9 | gaugex1-1/2 joist hanger nail 33 degree plastic collated (2 000 per box) | 6000 |
|
| Jackson | MS | Nails | Steel | Galvanized | 15 | gaugex2 da-finish nail (4 000 per box) | 16000 |
|
| Jackson | MS | Nails | 18 | gaugex1-1/4 finish brad nail (5 000 per box) | 15000 |
| ||
| Jackson | MS | Nails | Plastic | Plain | 1 3/4 | 1-3/4 cap-plastic roofing nail (2 000 per box) | 6000 |
|
| Jackson | MS | Nails | 12 | d coated sinker nail (50# carton) | 6 |
| ||
| Jackson | MS | Nails | 1 1/4 | roof tacks nails-special order | 6 |
| ||
| Jackson | MS | Nails | Steel | Galvanized | .092 x 1 3/4 | wire collated flat coil ring shank nails h.d.g. (3 000 per box) | 3000 |
|
| Arden | WI | Handles | 38100 kipp handle | inquire |
| |||
| Jackson | MS | Grease Fittings | 1/4 | pipe thread 67 1/2 degree grease fitting | 105 |
| ||
| Jackson | MS | Nails | .120 x 3 | ctd smooth nail 30 degree paper (2 000 per box) | 10000 |
| ||
| Jackson | MS | Nails | 1/4 x 6 | nail bright spike (60d) 50lb ctn. weighs/ea approx 13/pound or 650 per box head od .531 #2 wire guage | 3 |
| ||
| Jackson | MS | Nails | Steel | Galvanized | 3/8 x 8 | nail hot dip 50lb ctn. weighs .247/ea | 1 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .012 x 1/4 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .012 x 1/2 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .012 x 3/4 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .012 x 1 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .016 x 1/4 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .016 x 1/2 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .016 x 3/4 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .016 x 1 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .020 x 1/4 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .020 x 1/2 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .020 x 3/4 | compression spring | 5 |
|
| Jackson | MS | Springs (Compression) | Steel | Zinc/Clear | .120 x .020 x 1 | compression spring | 5 |
|
| Jackson | MS | Springs (Extension) | Steel | Zinc/Clear | .125 x .016 x 1/2 | extension spring | 5 |
|
| Jackson | MS | Springs (Extension) | Steel | Zinc/Clear | .125 x .016 x 3/4 | extension spring | 5 |
|
| Jackson | MS | Springs (Extension) | Steel | Zinc/Clear | .125 x .016 x 1 | extension spring | 5 |
|
| Jackson | MS | Springs (Extension) | Steel | Zinc/Clear | .125 x .016 x 1 1/2 | extension spring | 5 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
