| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Ball Bearings, Balls, Bearing Mounts | ms19060-313 | 35 |
| |||
| Century | FL | Springs (Compression) | ms24585c145 | 65 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | ms28774-129 | 60 |
| |||
| Century | FL | Knobs & Star Grips | hubbell d5178901 per drawing rev. 1 knob | 112 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | as3209-013 | 230 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | as3578-014 | 60 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | packing o-ring NAS1611-129A | 60 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | packing o-ring NAS1611-141A | 60 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | packing o-ring NAS1611-218A | 60 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | packing o-ring NAS1611-128 | 60 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | nas1611-115a | 60 |
| |||
| Century | FL | Protective Caps & Plugs | nas395-17-1 | 35 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | packing preformed o-ring NAS1611-237 | 59 |
| |||
| Century | FL | Grease Fittings | as15006-1p 1650as | 40 |
| |||
| Century | FL | Brackets & Supports | nas1130-3c-10 | 53 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | as3209-110 | 52 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | as3208-14 o-ring | 50 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | as9380-07 | 50 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | as3582-213 | 50 |
| |||
| Century | FL | Machine Screw | ms24586c50 | 50 |
| |||
| Cal Fastenrs | CA | Springs (Extension) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | century#80103s stainless steel extension spring considered special w/newport-we keep for now | 940 |
| ||
| Cal Fastenrs | CA | Protective Caps & Plugs | Plastic | caplug part# t-14-x red plug t-14-x | 530 |
| ||
| NAPPCO | TX | Handles | southco 92-21-521 handle latches | 29 |
| |||
| NAPPCO | TX | Latches & Catches | 300 Stainless (A1,A2, 18-8,304,310 etc.) | d-ring lock latch s/s (2 point) | 52 |
| ||
| NAPPCO | TX | Brackets & Supports | towel brackets 2 each | 969 |
| |||
| NAPPCO | TX | Hinges | Steel | Zinc/Clear | 19 | steel plated rear door hinge (flush)19 | 76 |
|
| NAPPCO | TX | Brackets & Supports | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4 | 1/4 three line bracket s/s | 450 |
| |
| NAPPCO | TX | Gas Springs, Gas Struts (Lift-O-Mat etc.) | Steel | Plain | gas spring flat bracket(3holes) | 1000 |
| |
| NAPPCO | TX | Gas Springs, Gas Struts (Lift-O-Mat etc.) | Steel | Plain | gas spring bracket 90deg(2holes) | 986 |
| |
| NAPPCO | TX | Springs (Extension) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | .375 x .041 x .075 | extension spring ss .375x.041x.075 | 230 |
| |
| NAPPCO | TX | Latches & Catches | southco c5-12-26 sealed lever latch | 16 |
| |||
| NAPPCO | TX | Knobs & Star Grips | Aluminum | k1 1/2 | aluminum knob 1 od 1/2 h 1/4-20 thd | 150 |
| |
| NAPPCO | TX | Protective Caps & Plugs | Plastic | square tube plug 1 polyethylene | 2430 |
| ||
| NAPPCO | TX | Gaskets | southco e3-0-30268-02 gasket e3 single hole | 469 |
| |||
| NAPPCO | TX | Latches & Catches | southco c2-32-11 lever latch raised | 13 |
| |||
| NAPPCO | TX | Latches & Catches | southco c3-12-10 latch | 24 |
| |||
| NAPPCO | TX | Protective Caps & Plugs | Plastic | 6.668 dia. 1.50lgth cap plug for | 200 |
| ||
| NAPPCO | TX | Latches & Catches | southco 64-22-10 paddle latches | 7 |
| |||
| NAPPCO | TX | Latches & Catches | southco lift & turn compression latch non-lock | 6 |
| |||
| NAPPCO | TX | Hinges | Steel | Plain | lift-off torpedo hinge | 10 |
| |
| NAPPCO | TX | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6 | 6 continuoushinge s/s 2 open x.062 | 26 |
|
| NAPPCO | TX | Latches & Catches | southco vise action compression latch large | 14 |
| |||
| American | NY | Nails | 6 x 1/2 | drive nail 17 | 20000 |
| ||
| IRF | NJ | Latches & Catches | latch spring-mcs | 58 |
| |||
| BAYFASTCO | FL | Protective Caps & Plugs | Plastic | Plain | .625 x 1.500 | vinyl cap black | 5692 |
|
| BAYFASTCO | FL | Protective Caps & Plugs | Plastic | Plain | 1/2 | hole plug black polyethylene | 6390 |
|
| BAYFASTCO | FL | Protective Caps & Plugs | Plastic | Plain | 1/8 x 1 x 1 | black vinyl end cap flat end | 44400 |
|
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 5,250 |
| |
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 2,000 |
| |
| THRDFAST | FL | Nails | Plastic | Plain | #8 x 1 1/2 | common nail plastic strip hdg | 2,000 |
|
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 1,500 |
| |
| THRDFAST | FL | Grease Fittings | Steel | 1/4 | nf-28x5/8 grease fitting stl 1641 | 1,492 |
| |
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 1,250 |
| |
| THRDFAST | FL | Grease Fittings | Steel | 1/4 | nf-28 grease fitting 45 stl 1637 | 850 |
| |
| THRDFAST | FL | Protective Caps & Plugs | Nylon (Polyamide) | Plain | 3/8 | hole plug black | 400 |
|
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 48,500 |
| |
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 13,500 |
| |
| THRDFAST | FL | Nails | 316, 317, A4 Stainless | #8 | t-316 ss common nail | 59 |
| |
| THRDFAST | FL | Nails | Steel | Galvanized | #10 | common nail hdg | 50 |
|
| THRDFAST | FL | Nails | Steel | Galvanized | #10 x 7 | ring shank gutter nails hdg | 50 |
|
| THRDFAST | FL | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Zinc/Clear | 3/8 | od strut strap | 115 |
|
| THRDFAST | FL | Strut Systems (Channels, Clamps, Hangers, etc.) | 2 7/16 x 1 5/8 | 2 7/16x1 5/8 12ga unistrut slot | 30 |
| ||
| THRDFAST | FL | Strut Systems (Channels, Clamps, Hangers, etc.) | 1 5/8 | 1-5/8 14 ga unistrut solid 20ft | 40 |
| ||
| THRDFAST | FL | Nails | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #10 x 2 1/2 | 18-8 ss ringshank nail | 25 |
| |
| THRDFAST | FL | Nails | #10 x 3 | bright common nail | 25 |
| ||
| THRDFAST | FL | Nails | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #12 x 3 1/4 | 18-8 ss sprialshank nail | 25 |
| |
| THRDFAST | FL | Grease Fittings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4 | nf-28 90 grease fitting ss 1969-s | 20 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.

