FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 2 | 10-24 x 2 phillips round hd m/s 18-8ss | 800 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | M20 | 20mm light duty radial ball bearing with 2 shields 3 bolt flush mount stamped tri-flange per print mpi rev. h 12-18-17 | 15 |
| |
| OneMonroe | MN | Protective Caps & Plugs | Plastic | Plain | 3 x 1 1/4 | caster chrome swivel hollow kingpin stm sz 1/2 id wheel sz 3 x 1-1/4 wheel mat thermoplastic rubber bearing precision w/total lock brake thread guards load ht 4-5/16 load cap 190 lbs temp rt-30 to +210 f |
| |
| OneMonroe | MN | Thumb Screw (Plain) | Steel | Zinc/Clear | #8-32 x 3/4 | 8-32 x 3/4 thumbscrew plated | 67 |
|
| OneMonroe | MN | Pipe Coupling, Pipe Connector | 3/8 x 1/8 | 3/8 tube x 1/8 npt dot male connector fitting | 10 |
| ||
| OneMonroe | MN | Socket Head Cap Screw | Class 8.8 | Plain | M6-1.00 x 55 | m6 x 1 x 55mm shc 8.8 sc-1 coated | 18 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/4-20 x 1 3/4 | 1/4-20 x 1-3/4 yellow zinc finish sae j429 grade 8 hex cap screw made in usa | 1200 |
|
| OneMonroe | MN | Hinges | spring hinge | 300 |
| |||
| Century | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 | ms17830-010c nut selflocking hex(reg hgt) 0.190-24 cres psvt | 1 |
|
| Century | FL | Round Spacer | Plain | nas43dd3-8fc | 14 |
| ||
| Century | FL | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 5/8-11 x 6 | 5/8-11 x 6 over all lng fully thread stud sa193-b7 steel | 300 |
|
| Century | FL | Hex Head Cap Screw | Steel | Plain | 1/2 | nas1464-050-10t spring clip | 143 |
|
| Century | FL | Machine Screw | Plain | nas1102e08-6 | 841 |
| ||
| Century | FL | Hex Head Cap Screw | Plain | 1/2-13 x 1 1/4 | ms35307-411 | 545 |
| |
| Century | FL | Panel Nut | Nickel Plated | 1/4-40 | grainger # 1jlr7 1/4-40 panel nut nut hex .250-40 uns-2b brt nickel | 500 |
| |
| Century | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M8 x 18 | m8 x 18 hex head cap screw a4-80 din 933 | 1000 |
|
| Century | FL | Flat Washer | Steel | Plain | .187 x .625 x .125 | parker 756333 retaining washer steel plain (.187 x .625 x .125) q2b | 159 |
|
| Century | FL | captive fast. ch518-16 | 828 |
| ||||
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Black | #8-32 x 3/8 | 8-32 x 3/8 ph pan taptite stl black zinc trivalent (rohs compliant) | 8000 |
|
| Century | FL | Machine Screw | Steel | Zinc/Clear | #6-32 x 1/2 | 6-32 x 1/2 phillips flat hd steel zinc plt | 500 |
|
| Century | FL | Machine Screw | Cadmium/Yellow | 1/4-20 x 1 | ms35206-283 | 1437 |
| |
| Century | FL | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Plain | #10 x 1/2 | #10 x 1/2 phil. pan particle board steel-black | 3950 |
|
| Century | FL | parker hannifin 00922001 rev n spring q2b | 254 |
| ||||
| Century | FL | Ball Bearings, Balls, Bearing Mounts | Plain | carleton cc-4370 ball rev.a | 170 |
| ||
| Century | FL | Eye Bolt | Silicon Bronze | Zinc/Clear | 1/4 x 4 | hindley 10805bzi 1/4 x 4 eyebolt only zp bulk no nut | 500 |
|
| NBS | CA | 12 Point Flange Screw (CounterBore) | Steel | Black Oxide | 1/4-28 x 1/2 | 1/4-28x1/2 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 1/2 x 1 | 1/2x1 dowel pin 0.0008 over size alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M8-1.25 x 30 | M8-1.25x30 cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow iso 4162 | 10000 |
|
| NBS | CA | Flat Head Socket Cap Screw | Class 12.9 | Plain | M6-1.00 x 16 | M6-1.0x16 cl. 12.9 griplox flanged socket screw-ribbed serrations-furnace black | 1000 |
|
| NBS | IL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 1/4 | 1/4x1/4 18-8 s/s steel dowel pin-asme b18.8.2-bright finish (taiwan) | 25000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M10-1.50 x 35 | m10-1.5 x 35mm cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow iso 4162 | 10000 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 3/4 x 3 1/4 | 3/4x3-1/4 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | IL | Deck Screw | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | #8 x 1 | #8x1 phil flat head decking screw-dacrotized 500hrs | 25000 |
|
| Alma Bolt | MI | Carriage Bolt | Steel | Plain | 1/2-13 x 5 1/2 | 1/2-13 x 5 1/2 carriage bolt | 979 |
|
| QCS | OR | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | M4-0.70 x 8 | M4-0.7x8 button soc cap screw 316ss | 1127 |
|
| API | IA | U-Bolt | Steel | Plain | M8 | u-bolt m8 | 20 |
|
| Alma Bolt | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Plain | #10 x 2 3/4 | #10 x 2 3/4 pan phillips type-a sms | 1900 |
| |
| QCS | OR | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 1/2 | 3/8-16x1-1/2 soc cap screw stainless | 100 |
|
| CIF | IL | Socket Head Cap Screw | Class 12.9 | Zinc/Clear | M8-1.25 x 40 | m8 x 1.25 x 40 socket head cap screw 12.9 plated per zn6a (zinc trivalent) with bake | 337 |
|
| CIF | IL | Hex Machine Bolt | Grade A | Galvanized | 1/2-13 x 1 1/4 | 1/2-13 x 1 1/4 hex machine bolt a307 hot dip galvanized | 19 |
|
| Set Screw | IL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 6 | m3-0.5 x 6 nylon tip stainless steel hex socket set screws | 4451 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 x 3/4 | #6 x 3/4 phillips flat head sms type-a 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 4 | 1/4-20 x 4 phillips truss m/s ss low contour | 7000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 1/4 | 8 x 1-1/4 phillips flat a ss/bo | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Painted | #6 x 3/4 | 6 x 3/4 square pan type-a 305ss w/nylon patch painted jerith green (m18) | inquire |
|
| Brikksen | FL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 x 28 | dowel pin (m6 tolerance) a2 m10 x 28 din 7 | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 8 x 1/2 | 8 x 1/2 phillips pan tek 410/chrom- | inquire |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 55 | button socket head cap screw a2 m5-.80 x 55 iso 7380 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 2 1/2 | #8 x 2-1/2 phillips flat head sms type-a 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 | 1/4 fender washer 1-1/4 od .050 thick 18-8ss | 281000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 20 | phillips flat head machine screw a2 ph m10-1.5 x 20 din 965 | 3000 |
|
| Marshall | MI | Socket Head Cap Screw | null | Plain | 5/8-18 x 2 3/4 | 5/8-18x2-3/4 shcs alloy plain | 10 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 1 | 5/8-11 x 1 soc hd cs ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1/2 | #8 x 1/2 phillips ovalal head sms type-a 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | High Collar Split Lock Washer | 316, 317, A4 Stainless | Plain | M8 | high collar split lock washer a4 m8 din 7980 | inquire |
|
| Brikksen | FL | External Type E Retaining Ring (E-Clip) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 9/16 | #36 hose clip (1-3/4-2 3/4) 9/16 bnd 300ss | 3000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 80 | slotted cheese head machine screw-10 per bag a2 m4-.70 x 80 din 84 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M10-1.50 x 25 | hex head cap screw full thread a4-80 m10-1.5 x 25 din 933 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M30-3.50 x 130 | hex head cap screw partial thread a4 m30-3.5 x 130 din 931 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain | #10 x 1 1/4 | 10 x 1-1/4 slotted hex washer a 316ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5-0.45 x 12 | slotted cheese head machine screw a2 m2.5-.45 x 12 din 84 | inquire |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 12 | button socket head cap screw a2 m8-1.25 x 12 iso 7380 | 100 |
|
| Brikksen | FL | Finished Hex Nut | 316, 317, A4 Stainless | Plain | 1/2-13 | 1/2-13 hex finish nut 316ss 50 per box f-24box | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 1/4 | 8 x 1-1/4 square pan t-a ss/almond trialmond | inquire |
|
| Brikksen | FL | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 3/4 | 10-24 x 1-3/4 fanged weld bolt s/s | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 | #8 x 1 phillips flat head sms type-a bp 18-8 ss 100pk 100 per clam 5 clams per box-fasco brand | 300 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 10 | phillips flat head machine screw a2 ph m3-.50 x 10 din 965 | 1000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3 1/2 | 3/8-16 x 3-1/2 hex head cs ss f593c | 10000 |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10-16 x 1 1/2 | 10-16 x 1-1/2 square flat tek 410ss w/nibs under hd on collated strips ssfhsd112s1016 | inquire |
|
| Brikksen | FL | Cushioned Pipe & Tube Loop Clamp | Aluminum | #20 (1-1/4 ) cushion clamp aluminum | 9000 |
| ||
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 1 1/4-7 x 5 | 1 1/4-7 x 5 hex head cs 316ss f593h | inquire |
|
| Brikksen | FL | Machine Screw | Brass | Plain | #10-24 x 3/8 | 10-24 x 3/8 slotted round m/s brass | inquire |
|
| EASTERN SCREW | RI | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 10-24 x 1/4 | 10-24 x 1/4 square socket truss 18-8 | 3905 |
| |
| SWACO | OH | Machine Screw | Class 4.8 | Zinc/Clear | M5-0.80 x 16 | m5-0.80x16 slotted pan m/s cl4.8 zp | 1532 |
|
| SWACO | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M30-3.50 x 100 | M30-3.50x100 hex cap sc 8.8 stl zn | 100 |
|
| SWACO | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1/2 | 10-32 x 1/2 shcs ss ms16996-10 | 4661 |
|
| SWACO | OH | T-Slot Machined Washer (Williams Washer, Zip Washer) | Steel | Zinc/Clear | 1/4 | 1/4 zip washer case hard stl zinc aka williams washer | 597 |
|
| GLF | OH | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #14 x 1 | #14 x 1 ind hwh s/m/s type-a stl zc | 5727 |
|
| GLF | OH | Beveled Washer (Round & Square) | Plain | 3/4 | 3/4 square-bevel washer-plain | 129 |
| |
| GLF | OH | Hex Tap Bolt (Fully Threaded) | Grade 8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/2-13 x 1 3/4 | 1/2-13 x 1-3/4 hex hd tap bolt gr 8 stl magni 575 | 338 |
|
| GLF | OH | Hex Head Cap Screw | Grade 5 | Plain | 1/2-13 x 3/4 | 1/2-13 x 3/4 hhcs gr 5 stl pln | 410 |
|
| GLF | OH | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M8-1.25 x 40 | m8-1.25 x 40 hhcs cl 10.9 stl zy din 931 | 2788 |
|
| GLF | OH | Tooth Lock Washer (Int. & Ext.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 | 1/4 int tooth lock washer 410 s/s | 184 |
|
| Bossard | AZ | Button Head Socket Cap Screw | Steel | Plain | screw button hd torx bn6404 | 700 |
| |
| Bossard | AZ | 12x15 clear poly bag microsemi | 165 |
| ||||
| Bossard | AZ | Sems Machine Screw | Steel | Plain | screw torx pan hd w/washer | 350 |
| |
| Bossard | AZ | nut flush stainless penn engineering | 60290 |
| ||||
| Bossard | AZ | stud flush stainless penn engineering | 13456 |
| ||||
| Bossard | AZ | Lock Nut, Nylon Insert | Plain | locknut nylon insert bn1722 din 985 | 200 |
| ||
| Optimas | IL | Set Screw (Socket Head) | ASTM A574 | ASTM F1941-10 Fe/Zn-Ni | 1/4-28 x 1/4 | 1/4-28 x 1/4 asme b18.3 socket set screw cup point alloy zinklad 250 (i) | 25325 |
|
| Optimas | IL | Double End Stud | Grade 8 | Plain | 1/2-13 x 8 | 1/2-13 x 8.000 external hex drive double end stud grade 8 per drawing (p) | 208 |
|
| Optimas | IL | Wire Rope Clamps, U-Bolt Clamps | Plastic | Plain | M10 | 8mm x 11.5mm double cable clip 10mm wd acetal black ppap | 786 |
|
| Hybroco S | MI | Finished Hex Nut | Plain | 3/8 | 3/8 dome hex nut cover black | 3500 |
| |
| American | WI | Machine Screw | Steel | Zinc/Clear | 3/8-16 x 2 | 3/8-16x2 nc phil round hd m/s zinc | 349 |
|
| American | WI | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #14 x 1 | #14x1 phil pan hd tek screw zinc | 1780 |
|
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | hex machine bolt class 8.8 zinc/clear | 98 |
| |
| Coburn Myers Fastening Systems | PA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | fully threaded stud (all thread) a194 grade b7 plain | 36 |
| |
| Coburn Myers Fastening Systems | PA | Square Head Bolt | Class 10.9 | Plain | square head bolt class 10.9 plain | 42 |
| |
| AIH | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 5/16 | 4-40x5/16 socket cap screw patch s/s | 510 |
|
| AIH | AZ | Socket Head Cap Screw | Class 12.9 | Plain | M5-0.80 x 16 | M5-.8x16 socket cap screw 12.9 | 2900 |
|
| Brikksen | FL | Cushioned Pipe & Tube Loop Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #34 (2-1/8 ) cushion clamp ss | inquire |
| ||
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 1/4 | 8 x 1-1/4 phillips flat a ss/white m9 | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | M4-0.70 x 30 | phillips pan head machine screw a4 ph m4-.70 x 30 din 7985 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 8 x 3/4 | 8 x 3/4 phillips ovalal a ss/blk xyl- | 6000 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 6 | 1/2-13 x 6 soc hd cap screw ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 5 | 5/16-18 x 5 phillips pan head m/s 18-8 ss 5 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Hewes | NY | Socket Head Cap Screw | Class 12.9 | Plain | M12-1.75 x 180 | M12 x1.75 x180 shcs 12.9 stl din 912 | 93 |
|
| Komar | IL | External Thread Insert, Self-Tapping Insert | Grade 2 | Zinc/Yellow | 1/2-13 | 1/2-13 large flange insert(gr.200-.350)zc yellow |
| |
| FasSpcMfg | FL | Dowel Pin | Steel | Plain | 1/8 x .812 | 1/8 x .812 dowel pin steel rc50-58core rc60min.case | 348 |
|
| FasSpcMfg | FL | Dowel Pin | Steel | Plain | 1/8 x .812 | 1/8x.812 dowel pin steel rc50-58core rc60min.case | 348 |
|
| FasSpcMfg | FL | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/4-20 x 5/8 | 1/4-20 x 5/8 hex cap ferralium 255 | 3 |
|
| FasSpcMfg | FL | Flat Head Socket Cap Screw | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | #10-24 x 3/8 | 10-24 x 3/8 flat head socket cap k-500 monel | 5 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 5/8 | 4-40 x 5/8 low head socket cap 18-8 stainless | 133 |
|
| NutsBolts | NE | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10 x 1 | 10 x 1 ss tek hwh neoprene 410ss | 3000 |
|
| NutsBolts | NE | F436 Beveled Structural Washer | Steel | Plain | 1 | 1 f436 bevel washer plain usa | 200 |
|
| NutsBolts | NE | Thrust Washer | Silicon Bronze | Plain | .395 x 1.75 x .125 | .395x1.75 x.125 bronze bearing per bw-1 | 232 |
|
| OneMonroe | MA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Plain | 3/8-24 x 2 | 3/8-24 x 2 hex flange bolt gr 8 | 400 |
|
| OneMonroe | MA | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2 | #2 split lockwasher stainless | 50 |
|
| OneMonroe | MA | Blind Rivet | Silicon Bronze | Plain | 54 1/8 (.063-.125) | ab 54 bronze 1/8 (.063-.125) mar ab54abronze | 2800 |
|
| OneMonroe | MA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M8-1.25-1.25 x 22 | m8-1.25 x 22m hex cap screw class 8.8 plated | 74 |
|
| Empire | WA | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 50 | M5( .8)x50 button soc cs a2 iso 7380 | 92 |
|
| Empire | WA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Plain | #12-24 x 1/2 | 12-24 x 1/2 pan hd phil tcs | 4000 |
|
| Irwin Ind | Ont | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 9/16-18 x 3 1/2 | 9/16-18x3-1/2 hex capscrew grade 8 zinc dichromate b18.2.1 | 50 |
|
| Raw Produ | NJ | Machine Screw | Brass | Plain | #8-32 x 7/8 | brass slotted pan head ms #8-32 x 7/8 | 400 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1/4 | phillips flat head ms 304 ss #10-32 x 1/4 | 2058 |
|
| Raw Produ | NJ | Hurricane Shutter Screw (Sidewalk Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 | slotted phillips combo sidewalk bolts 18-8ss 1/4-20 x 1/2 | 72 |
|
| Raw Produ | NJ | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain | 1/4-20 x 1 1/2 | socket set screw 316 ss 1/4-20 x 1-1/2 | 257 |
|
| Raw Produ | NJ | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 x 3/4 | spanner ovalal head sms 18-8ss #6 x 3/4 | 503 |
|
| Raw Produ | NJ | Machine Screw | 316, 317, A4 Stainless | Plain | #6-32 x 3/8 | hex trim head ms 316 ss #6-32 x 3/8 | 500 |
|
| Raw Produ | NJ | Flat Washer | Aluminum | Plain | 6-8 3/16 dome head (recessed crown) aluminum supratite with washer | att06-6-8w | 2075 |
| |
| Raw Produ | NJ | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 x 1 1/2 | spanner flat head sms 304 ss #12 x 1-1/2 | 72 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-20 x 7/8 | hex cap screws grade 5 zinc 1/4-20 x 7/8 ft | 284 |
|
| Fastenerc | OH | Tooth Lock Washer (Int. & Ext.) | Phosphor Bronze | Plain | #10 | #10 phosbrz external tooth l/w plain | 5475 |
|
| Fastenerc | OH | SAE Flat Washer | Steel | Zinc/Yellow | #5 | #5 steel flat washer-sae znc/yel | 5300 |
|
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | ma3279-211 ref kato tnm-10x1.5c-20.0 refhcoil# | 500 |
| ||
| AEROSPCE | MN | Self-Clinching Stud | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/2 x 400 | fh4-0420-8 pem .500lg(flush-head)400series sst stud | 3699 |
|
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 300 | sp-632-1 pem 300 nut-stamped=a286sst grooved= | 11579 |
|
| F. Solutions | OH | Hole Saws | 3 3/8 | 3-3/8 bi metal speed slotted hole saw | 7 |
| ||
| F. Solutions | OH | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16-2.00 x 85 | stud full thread m16-2.0 x 85 18-8 ss | | 65 |
|
| F. Solutions | OH | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10 x 2 | indented hex washer self drilling tek screw 10x2 410 ss | 73 |
|
| F. Solutions | OH | Tooth Lock Washer (Int. & Ext.) | Steel | Plain | 5/16 | 5/16 ext/internal x .890 x .035 stl cd2 ms45904-72 | 36 |
|
| Wurth Ind | IN | Cap Nut (Acorn Nut) | Grade 2 | Zinc/Clear | #10-24 | high crown acorn/cap nut grade 2 zn 10-24 zinc/clear | 3000 |
|
| National | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 16 | m6 x 16 truss slot ms ss | 90 |
|
| WINA | MN | Hex Head Cap Screw | Aluminum | Non-Electrolytic Zinc & Aluminum Flakes + Matrix | 5/8-18 x 7 | hex cap screw gr8 zfshr 5/8-18x7 | 1446 |
|
| Mansco | MI | Headed Weld Stud, Shear Connector | Steel | Plain | 1/2 x 8 1/8 | headed concrete anchor | 800 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Clear | #10-24 x 1/2 | 10-24x1/2 phil flat uc ms st zn () () | 9951 |
|
| Olander | CA | External Type C Retaining Ring (C-Clip) | Steel | Plain | .156 grip ring stl | 3104 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 4-40-3b heli-coil plug tap | 1 |
| ||
| Olander | CA | Machine Screw | Steel | Zinc/Clear | m2.5-.45 x 6 phil flat ifi 524 rohs | 3196 |
| |
| Olander | CA | Machine Screw | Steel | Plain | #6-32 x 1/4 | 6-32 x 1/4 phil flat stl ni () () | 1791 |
|
| Olander | CA | Self-Clinching Standoff | Steel | Zinc/Clear | self clinch concealed stdf sst rohs () () | 2257 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | #6-32 | 6-32 locking heli-coil twins inner ins 4685-06CNW176 () () | 500 |
| ||
| Olander | CA | Steel | southco quick oping captv scr () () | 314 |
| |||
| Olander | CA | Springs (Compression) | associated spring comp spring mw () () | 2 |
| |||
| Olander | CA | southco cam flat () () | 100 |
| ||||
| Field Fas | IL | U-Bolt | Steel | Zinc/Clear | 1/4-20 x 1 3/4 | 1/4-20x1 u-bolt 1-3/4 stl zc with nuts | 500 |
|
| Olander | CA | Internal Wrenching Nut (Allenut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 | 5/16-18 allen nut sst rohs () | 35 |
|
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | Steel | Painted | #8-15 x 1/2 | #8-15 x 1/2 self-piercing screws, 1/4 indented hex washer head slotted, twin lead, full thread, sharp point, steel zinc pltd, head painted rolx wildrose | 15,000 |
|
| F. Solutions | OH | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 1 1/2 | carriage bolt 7/16-14x1-1/2 18.8 | 5 |
|
| Rapid | NY | Solid Rivet | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 281 5/32 x 1 1/2 | 100deg.countersink monel per qq-n-281 i/a/w rev 3 5/32 x 1-1/2 MS20427M5-24 | 58.5542801980198 |
|
| Rapid | NY | Blind Rivet | Aluminum | Plain | low profile alum. blind threaded insert 3/8-16 unc .027-.150 grip open end | 1997 |
| |
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 2017-t4 1/8 x 7/32 | universal head 2017-t4 aluminum i/a/w rev 2 1/8 x 7/32 clear anodize/mil-a-8625 MS20470D4-3A5 | 8.9558 |
|
| Rapid | NY | External Thread Insert, Self-Tapping Insert | Steel | Plain | x .060 | flat hd steel rivet-nut open end rev 12 4-40 thread x .060-.085 grip cadmium NAS1329S04-85 | 37 |
|
| Rapid | NY | Semi-Tubular Rivet | Aluminum | Plain | .085 | 100 deg. countersink 5056 alum. semi-tubular .085/.089x3/16x.171 head diam.plain | 21600 |
|
| Rapid | NY | Solid Rivet | Superalloy (Inconel, Hastelloy, Alloy 20) | Passivated | 7 5/32 x 1 1/4 | univ.hd.a-286 stain.steel ams5737 i/a/w rev 7 5/32 x 1-1/4 annealed passivated NAS1198-5-20 | 100.9136 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 3/32 x 1 | round head 2017-t4 aluminum i/a/w rev 6 3/32 x 1 AN430D3-16 | 8.6 |
|
| Rapid | NY | Semi-Tubular Rivet | Steel | Zinc/Clear | .123 x 1/4 | oval head steel semi-tubular .123x1/4 zinc & clear chromate | 92255 |
|
| Rapid | NY | Structural Blind Rivet | Aluminum | Plain | dome hd monobolt-stain./stain. 3/16x.062-.270 grip | 2572 |
| |
| Rapid | NY | Blind Rivet | Aluminum | Chromate Conversion (Iridite, Alodine) | 100 | HARDWARE NAS1739B4-3 | 362 |
|
| Arden | WI | Socket Head Cap Screw | Steel | Zinc/Yellow | 3816 x 1 1/4 | 3816x1 1/4 hxsoc cs zy | inquire |
|
| Arden | WI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1.437 x 1.75 x .060 | 1.437x1.75 x.060 fw 18-8ss | inquire |
|
| FDL | IL | SAE Flat Washer | Steel | Zinc/Clear | 1/2 | 1/2 inch sae flat washer zinc 50,000pcs/ctn 23kgs/ctn b18.22.1 | 49900 |
|
| THRDFAST | MS | Machine Screw | Steel | Zinc/Clear | 10 | nf-32x1 1/4 slotted round m/s b18.6.3 | 50 |
|
| THRDFAST | AL | Hex Head Cap Screw | Grade 5 | Plain | 1 1/4-7 x 7 1/2 | gr5 hex c/s b18.2.1 | 1 |
|
| THRDFAST | MS | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3 | 18-8 ss button soc c/s b18.3 | 25 |
|
| THRDFAST | OK | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 3/4-10 x 2 | a325 type-1 str/b hdg full thread b18.2.1 b18.2.6 | 44 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 3/4-10 x 4 | all thread stud monel 400 | 133 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
