FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 1/2 x 4 1/2 | 1/2x4-1/2 gr5 hhcs blk | 46 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 9/16 x 1 1/4 | 9/16x1-1/4 uss gr5 hhcs z/p | 69 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1 x 1 1/2 | 1x1-1/2 uss gr8 hhcs y/z | 15 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1 1/8 x 5 | 1-1/8x5 uss gr5 hhcs z/p | 1 |
|
| Shadran I | IA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1 1/4 x 2 1/2 | 1-1/4x2-1/2 uss gr5 hhcs z/p | inquire |
|
| Shadran I | Grease Fittings | Plain / Furnace Black | 1/4 | 1/4 drive-in grease fitting | 5 |
| ||
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 1/2 x 4 | 1/2x4 sae hhcs gr5 | 16 |
| |
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 7/16 x 1 | (7) 7/16x1 sae hhcs gr5 | 1 |
| |
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 7/16 x 4 | 7/16x4 sae hhcs gr5 | 2 |
| |
| Shadran I | Square Nut | Plain / Furnace Black | 1-8 | 1-8 square nut | 3 |
| ||
| Shadran I | Grease Fittings | Plain / Furnace Black | M10 | 10m-1.00 straight grease fitting | inquire |
| ||
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 9/16 x 1 1/2 | 9/16x1-1/2 sae gr5 hhcs | 2 |
| |
| Shadran I | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 3/4 x 2 | 3/4x2 sae gr8 hhcs | 8 |
| |
| Shadran I | Masonry & Concrete Drill Bits | Steel | 5/32 x 4 x 2 | 5/32x4x2 sds hammer bits 25pk | 4 |
| ||
| Shadran I | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | 8 x 1/2 | 8x1/2 ph ovalhd sms z/p | 40 |
| |
| Shadran I | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 5/16 x 2 | 5/16x2 sae hhcs gr5 | 20 |
| |
| Shadran I | Hex Jam Nut | Plain / Furnace Black | 5/16-24 | 5/16-24 jam nut | 27 |
| ||
| Shadran I | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | M8-1.25 x 40 | m8-1.25x40 fhscs | 1 |
| |
| Shadran I | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | M8-1.25 x 50 | m8-1.25x50 fhscs | 2 |
| |
| Shadran I | Plow Bolt, Scraper Blade Bolt | Grade 8 | Plain / Furnace Black | 5/8 x 3 1/2 | 5/8x3-1/2 gr8 dome plow bolt | inquire |
| |
| RePneu To | MI | Tubing | air tube | 1 |
| |||
| RePneu To | MI | Flat Head Socket Cap Screw | Class 10.9 | Plain / Furnace Black | M10-1.50 x 65 | m10-1.50x65 mm (pt) 10.9 flat socket caps coarse thermal black oxide din 7991 | 100 |
|
| RePneu To | MI | Socket Head Cap Screw | null | Plain / Furnace Black | #6-32 x 1 3/4 | #6-32x1 3/4 (pt) socket head cap screws coarse alloy thermal black oxide | 96 |
|
| RePneu To | MI | Gaskets | 2-005 | gasket or 2-005 | 5 |
| ||
| RePneu To | MI | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #10-16 x 1 | #10-16x1 indent hwh unslotted#3 point bsd proferred self drilling screws zinc cr+3 | 1900 |
|
| RePneu To | MI | Hex Head Cap Screw | Class 8.8 | Plain / Furnace Black | M6-1.00 x 20 | m6-1.00x20 mm (ft) hex cap screws 8.8 / iso 4017 coarse med. carbon plain din 933 | 100 |
|
| RePneu To | MI | Hex Head Cap Screw | Class 8.8 | Plain / Furnace Black | M6-1.00 x 25 | m6-1.00x25 mm (ft) hex cap screws 8.8 / iso 4017 coarse med. carbon plain din 933 | 400 |
|
| RePneu To | MI | Hex Head Cap Screw | Class 8.8 | Plain / Furnace Black | M10-1.50 x 45 | m10-1.50x45 mm (ft) hex cap screws 8.8 coarse med. carbon plain din 933 | 300 |
|
| RePneu To | MI | Hex Head Cap Screw | Class 8.8 | Plain / Furnace Black | M12-1.75 x 150 | m12-1.75x150 mm (ft) hex cap screws 8.8 coarse med. carbon plain din 933 | 98 |
|
| RePneu To | MI | Hex Head Cap Screw | Class 8.8 | Plain / Furnace Black | M12-1.75 x 70 | m12-1.75x70 mm (pt) hex cap screws 8.8 coarse med. carbon plain din 931 | 69 |
|
| RePneu To | MI | Panel Clips, Plastic Push-In (Pine Tree, Xmas Tree, etc.) | Plain / Furnace Black | 6.2-6.4 | clip xmas 6.2-6.4hl 2.0-13.5pnl nyl/blk | 980 |
| |
| RePneu To | MI | Round Female/Female Standoff | Plain / Furnace Black | spacer | 10 |
| ||
| RePneu To | MI | Signs & Labels | screen label | 3 |
| |||
| RePneu To | MI | Machine Screw Nut | Plain / Furnace Black | clamshell nut | 54 |
| ||
| RePneu To | MI | Push-on Nut (Pushnut, Starlock Washer, etc.) | Plain / Furnace Black | nose housing retaining nut | 9 |
| ||
| RePneu To | MI | U-Bolt | Steel | Plain / Furnace Black | 1/2 | 1/2 avbolt eco segemnted collet assembly | 30 |
|
| RePneu To | MI | L-Wrenches, Allen Wrenches & Torx Wrenches | M2 | hex key 2mm | 5 |
| ||
| RePneu To | MI | O-Rings & Quad Ring Seals (X-Rings) | Plain / Furnace Black | o-ring (p-7) | 2 |
| ||
| RePneu To | MI | Flat Washer | Plain / Furnace Black | 1 x 2 | 2 x 1 wh 500/rl nameplate lable | 2 |
| |
| RePneu To | MI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 8 x 40 | 8 x 40 grit predator psa disc | 50 |
| |
| OneMonroe | NC | Grommets & Eyelets | bumper cover grommet-ford | 1.52 |
| |||
| OneMonroe | NC | Carriage Bolt | Grade A | Plain / Furnace Black | 3/8-16 x 3 1/2 | 3/8-16 x 3-1/2 plain finish astm a307 grade a round head carriage bolt | 23 |
|
| OneMonroe | NC | Grommets & Eyelets | hdlgt mntng grommet-chrysler | 1.88 |
| |||
| RePneu To | MI | Gaskets | gasket (o-ring) | 2 |
| |||
| OneMonroe | NC | Carriage Bolt | Grade A | Zinc/Clear | 7/16-14 x 2 | 7/16-14 x 2 zinc finish astm a307 grade a round head carriage bolt | 25 |
|
| OneMonroe | NC | Carriage Bolt | Grade A | Zinc/Clear | 7/16-14 x 2 1/2 | 7/16-14 x 2-1/2 zinc finish astm a307 grade a round head carriage bolt | 5 |
|
| OneMonroe | NC | Carriage Bolt | Grade A | Zinc/Clear | 7/16-14 x 6 | 7/16-14 x 6 zinc finish astm a307 grade a round head carriage bolt | 15 |
|
| OneMonroe | NC | Hinges | door hinge pin kit-gm | 4 |
| |||
| RePneu To | MI | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 1/2-13 x 2 1/2 | 1/2-13x2 1/2 b7 stud zinc (end to end) | 330 |
|
| RePneu To | MI | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 1/2-13 x 2 3/4 | 1/2-13x2 3/4 b7 stud zinc (end to end) | 180 |
|
| RePneu To | MI | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 1/2-13 x 4 | 1/2-13x4 b7 stud zinc (end to end) | 220 |
|
| OneMonroe | NC | Socket Head Cap Screw | Steel | Black Oxide | 7/8-9 x 6 1/2 | 7/8-9 x 6-1/2 black oxide alloy steel socket cap screw | 14 |
|
| RePneu To | MI | Threaded Rod | Grade B7 | Plain / Furnace Black | 3/4-10 x 6 | 3/4-10x6 a193 b7 all thread rods plain | 22 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 2 x 13/16 | caster dual wheel swivel-plate wheel sz 2 x 13/16 wheel mat hard rubber bearing sintered load ht 2-15/16 top plate sz 1-7/8 x 2-5/8 bolthole pattern 15/16 x 2-1/8 load cap 200lbs. | 165 |
|
| OneMonroe | NC | Socket Head Cap Screw | Steel | Black Oxide | 7/8-9 x 9 | 7/8-9 x 9 black oxide alloy steel socket cap screw | 5 |
|
| OneMonroe | NC | Socket Head Cap Screw | Steel | Black Oxide | 1-8 x 1 1/2 | 1-8 x 1-1/2 black oxide alloy steel socket cap screw | 32 |
|
| Century | FL | Flat Washer | Steel | Zinc/Clear | M12 | m12 flat washer steel zinc acp5-101 .0003 min trivalent zinc clear and sealer to resist 72 hrs to white corrosion & 120 hrs to red rust din 125 | 200 |
|
| Century | FL | External Type SH Retaining Ring | Steel | Plain / Furnace Black | 5/8 | ms16624-1062 retaining ring | 1445 |
|
| Century | FL | Set Screw (Socket Head) | ASTM A574 | Plain / Furnace Black | 3/8-16 x 1/2 | 3/8-16 x 1/2 hex soc set screw knurld cup alloy stl patchlok | 200 |
|
| Century | FL | parker nichols 35-56053-9380-1rev.c key cylindrical | 52 |
| ||||
| Century | FL | Oil Seals, Shaft Sealing Rings | Plain / Furnace Black | parker aerospace 38-79004-0082-1 rev.d seal shaft | 58 | |||
| Century | FL | External Type SH Retaining Ring | Plain / Furnace Black | 1.125 | ms16624-4112 | 1 |
| |
| Century | FL | Set Screw (Slotted Head) | ASTM A574 | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 slotted set screw cup pt alloy steel plain | 10 |
|
| Century | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M20 x 240 | m20 x 240 hhcs 8.8 zinc part. thread. din 931 | 10 |
|
| Century | FL | Flat Washer | Brass | Zinc/Clear | .656 x 1.250 x .062 | .656 x1.250 x.062 flat washer brass zc .656 x 1.25 x .062 flat washer brass trivalent zinc clear | 10 |
|
| Century | FL | Internal Type HO Retaining Ring | Steel | Zinc/Clear | roto-clip roto-clip ho-200-stz3x rohs compliant ho-200-stz3x ho-200-stz3x rotor clip | 450 |
| |
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | Plain / Furnace Black | #172 | o-ring encaps. sili. #172 marco# t1002-172 | 350 |
| |
| Century | FL | Threaded Rod | Steel | Galvanized | 3/8-16 x 12 | 3/8-16 x 12 threaded rod steel hot dip galvanized | 3 |
|
| Century | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | 1/4 x 3/4 | 1/4 x 3/4 ind hex washer hd tek steel zinc plt | 12034 |
|
| Century | FL | Latches & Catches | 00 | 009-0025440 rev a bush-fascia latch rod ncr 009-0025440 | 700 |
| ||
| Century | FL | Electrical Lugs & Terminals | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | #10-32 x .492 | cr3-17-2 10-32 x .492 terminal weld stud with collar 302hq stainless steel | 1000 |
|
| Century | FL | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 3 | 1/4-20 x 3 slotted/phillips combo round machine screw steel zinc q2a | 500 |
|
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #4-40 x 1/4 | 4-40 x 1/4 socket cap 18-8 black ox | 500 |
|
| Century | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Plain / Furnace Black | 3 | l3 nova-431 screw less patch rev a l3 technologies l3 technologies | 486 |
| |
| Century | FL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/8 x 5/16 | dowel pin 1/8 x 5/16 18-8 s/s dfars 0.0002 oversized 0.1251-0.1253 | 900 |
|
| Century | FL | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 5/16 | 10-32 x 5/16 phillips pan hd ext l/w 18-8 | 2000 |
|
| XL Screw | GA | Square Head Bolt | Steel | Plain / Furnace Black | 5/8-11 x 5 | square m/b std thrd fsb astm a307 | 90 |
|
| XL Screw | GA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #12-24 x 1 1/2 | phillips pan 23 tcs h t & clear chromate | 1,500 |
|
| XL Screw | GA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #10 x 5/8 | phillips flat 25 tcs h t & clear chromate | 5,000 |
|
| XL Screw | GA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 1/2-13 | gr c prevailing torque lock nuts h t zp waxed | 1,400 |
|
| XL Screw | GA | Socket Head Cap Screw | ASTM A574 | Plain / Furnace Black | 1/2-13 x 5 | socket c/s h t astm a574 ansi/asme b18.3 3a | 120 |
|
| XL Screw | GA | Fully Threaded Stud (All Thread) | Grade B7 | Plain / Furnace Black | 1-8 x 8 | astm a193 b7 stud dc 2a thrd stl 1st to 1st thread | 30 |
|
| XL Screw | GA | Split Lock Washer | Steel | Galvanized | 5/8 | med split locks hdg | 2,000 |
|
| XL Screw | GA | Shoulder Bolt (Stripper Bolt) | Steel | Plain / Furnace Black | 3/4 x 3 (5/8-11) | hex socket shoulder screws h t | 40 |
|
| XL Screw | GA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1-8 x 2 1/2 | hex c/s SAE j429 zp asme b18.2.1 | 60 |
|
| XL Screw | GA | Thumb Screw (Shoulder) | Steel | Zinc/Clear | #8-32 x 1/2 | thumb zp type-b regular pattern (no shoulder) | 10,000 |
|
| XL Screw | GA | Carriage Bolt | Grade 5 | Zinc/Clear | 1/4-20 x 1 3/4 | c/b f/t up to 6 usb SAE j429 zp | 1,800 |
|
| XL Screw | GA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M10-1.50 x 25 | c/s f/t h t zp din 933 | 800 |
|
| XL Screw | GA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6-19 x 1/4 | phillips pan hi-lo tfs type-b h t & clear SAE j933 undersized | 25,000 |
|
| XL Screw | GA | Hex Head Cap Screw | Grade 5 | Plain / Furnace Black | 5/8-11 x 1 3/4 | hex c/s SAE j429 asme b18.2.1 | 200 |
|
| XL Screw | GA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #4-40 x 3/16 | phillips pan 23 tcs h t & clear chromate | 30,000 |
|
| XL Screw | GA | Lag Screw | Steel | Plain / Furnace Black | 5/8 x 2 1/2 | hex lag | 180 |
|
| XL Screw | GA | Carriage Bolt | Grade 5 | Zinc/Clear | 1/2-13 x 5 | c/b f/t up to 6 usb SAE j429 zp | 150 |
|
| XL Screw | GA | Wood Screw | Steel | Zinc/Clear | #6 x 1/2 | phillips flat wood & clear chromate | 20,000 |
|
| XL Screw | GA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 7/8-9 x 6 | astm a325 heavy hex str/b type-1 hdg | 35 |
|
| XL Screw | GA | Hex Machine Bolt | Steel | Zinc/Clear | 7/16-14 x 3 3/4 | hex hd m/b std thrd astm a307 zp | 250 |
|
| RePneu To | MI | Handles | handle base machined | 1 |
| |||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
