FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 full thread. stud steel/zinc (rohs) w/chamfered ends e2a | 598 |
|
| Century | FL | Blind Rivet | Steel | Plain | 1/4 | 1/4 lg flange blind rivet steel/steel .626-.750 grip brighton# 034016 vebrb034016 | 500 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10-32 x 1 1/2 | 10-32 x 1 1/2 ind hex washer taptite 410 stainless steel | 46060 |
|
| Century | FL | Blind Rivet | Plain | 3/32 (.126-.187) | cherry cr2673cw-3-04 vechecr2673cw-3-04 | 10195 |
| |
| Century | FL | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | M8 x 20 | jergens 851026 klp t-handle 8mm x 20 ss | 2 |
| |
| Century | FL | Tab Washer | Plain | 77 | 7767350 rev f tab washer | 15 |
| |
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5 x 8 | m2.5 x 8 slottedflat m/s s/s dfars compliant iso 2009 | 5750 |
|
| Century | FL | Machine Screw | Plain | #2-56 x 1/4 | nas1189e02p4b | 747 |
| |
| Century | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 5/8 | 92210a244 flat head hex skt cap 10-24 x 5/8 flat soc hd cap screw 18-8 | 97 |
|
| Century | FL | Round Female/Female Standoff | Aluminum | Plain | M8 | raf m0611-4-a 8mm round 4 x 22 alum spacer m0611-4-a | 1535 |
|
| Century | FL | Grooved Pin | Plain | groov-pin b25020-30 spaenaur 628-513 | 41 |
| ||
| Century | FL | parker 11392002 link pin plate q2b 316 ss (see print) rev- | 6806 |
| ||||
| Century | FL | Shoulder Bolt (Stripper Bolt) | ASTM A574 | Black Oxide | 07756001 slotted shoulder bolt obs2007 alloy black oxide w/rust prevent q2b parker 07756001 | 880 |
| |
| Century | FL | Blind Rivet | Plain | cherry cr7770s-06-02 vechecr7770s-06-02 | 8457 |
| ||
| Century | FL | Socket Head Cap Screw | Plain | 4-18 | nas1351c4-18 | 1238 |
| |
| Century | FL | m2742610168d ring reaining 3.000 | 3 |
| ||||
| Century | FL | Flat Washer | Plain | .188 x .440 x .063 | 22-1861 silicone flat washer per drawing .188 id x .440 od x .063 thk honeywell 22-1861 | 6500 |
| |
| Century | FL | External Type SH Retaining Ring | Steel | Plain | roto-clip roto-clip roto-clip sh-37 plain steel sh-37 sh-37 rotor clip | 2000 |
| |
| Century | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 5/16 | 1/4-28 x 5/16 hx soc set screw cone point stainless steel | 450 |
|
| Century | FL | Flat Washer | Steel | Zinc/Clear | .625 x .812 x .025 | .625 id x .812 od x .025 thick flatwasher stl zinc | 87 |
|
| GLF | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | #10-32 x 3/8 phillips round hd m/s 18-8 s/s | 400 |
|
| UNEEDA | NJ | Hex Head Cap Screw | Steel | Plain | 1/2-13 x 1 1/2 | 1/2-13x1-1/2 hex cap screw | 100 |
|
| GLF | OH | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/8 | 3/8 (m8/m10) conical toothed washer geomet 321 + ml black | 1379 |
| |
| GLF | OH | Electrical Lugs & Terminals | Tin Plated | 8 | 3/8 stud 8 ga heavy duty lug tin plated copper 10/pk | 10 |
| |
| GLF | OH | Machine Screw | Plain | phillips hd m/s | 24 |
| ||
| AIH | AZ | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3/4 | 3/8-16 x 3/4 screw socket set flat point 18-8 ss | 350 |
|
| NAPPCO | TX | Machine Screw | Steel | Zinc/Clear | #6-32 x 1 3/4 | phillips flat m/s steelzincpltd 6-32x1-3/4 | 1360 |
|
| NAPPCO | TX | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 6 1/2 | hex hd c/s s/s 18-8 5/8-11x6-1/2 | 100 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 3/8 x 2 3/4 | 3/8x2-3/4 dowel pin 0.0008 over size alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 12.9 | Phosphate | M8-1.25 x 55 | M8-1.25x55 cl.12.9 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) din 6921 | 10000 |
|
| NBS | IL | Socket Head Flange Screw w/ ribs | Grade 9 | Plain | 5/16-18 x 1 | 5/16-18 x 1 gr. 9 griplox flanged socket screw-ribbed serrations-furnace black | 1000 |
|
| CIF | IL | Machine Screw | Grade 5 | Plain | 5/16-18 x 2 | 5/16-18 x 2 unslotted pan head machine screw unslotted special head per print grade 5 (1038-5) oil dipped | 969 |
|
| CIF | IL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 8 | m4-0.7 x 8 phillips flat head machine screw 18/8ss | 7600 |
|
| CIF | IL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 | #10 flatwasher 18-8 stainless steel | 394 |
|
| OneMonroe | MN | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8 | nut hex m8 s/s | 20 |
|
| OneMonroe | MN | Hinges | gate hinge-pair | 1 |
| |||
| OneMonroe | MN | Toggle Bolt with Wings, Spring Toggle Anchor | Plain | 5/8 | 5/8 versa toggle #8558 | 600 |
| |
| OneMonroe | MN | Blind Rivet | Aluminum | Plain | 3/4 | 3/16 x 1 3/4 alum/steel x-long blind rivet | 500 |
|
| OneMonroe | MN | Protective Caps & Plugs | Plastic | Plain | 18 x 48 | metro super erecta wire shelf 18 x 48 metroseal 3 plastic split sleeves included 800lbs capacity. | 4 |
|
| OneMonroe | MN | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8-32 x 3/4 | 8-32 x 3/4 phillips flat tcs t-f stl znc | 6000 |
|
| OneMonroe | MN | Pipe Coupling, Pipe Connector | Steel | 3/4 | 3/4 male jic x 1/2 male pipe-male connector-steel | 19 |
| |
| OneMonroe | MN | Eye Nut / Lifting Eye Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | 1/2 stainless steel eyenut | 12 |
|
| OneMonroe | MN | Hex Head Cap Screw | Class 8.8 | Plain | M24 x 55 | m24 x 55 hhc 8.8 933 | 10 |
|
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1 3/4 | 8-32 x 1 3/4 socket cap screw stainless | 11 |
|
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain | M16-2.00 x 100 | m16 x 2.0 x 100 cl 12.9 skt hd c/s-pln | 46 |
|
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 1/4 | 2-56 x 1/4 torx flat m/s t-6 ss | 4000 |
|
| OneMonroe | MN | Gas Springs, Gas Struts (Lift-O-Mat etc.) | gas spring-140 # | 3 |
| |||
| OneMonroe | MN | Heavy Hex Nut | Grade 2H | Plain | 1-8 x 7 1/2 | 1-8 x 7 1/2 a193b7 ft studs w/2 a194-2h hvy nut sc-2 | 4 |
|
| OneMonroe | MN | Band Saw Blades | Steel | 1 | 109 (9 1 ) x 1 x .035 x 5/8 tpi bandsaw blade-crum mfg | 5 |
| |
| OneMonroe | MN | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M6 x 16 | m6 x 16 mm shc a4 ss | 25 |
|
| OneMonroe | MN | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4-7 x 7 | 1-1/4-7 x 7 full threaded stud ss stainless steel | 8 |
|
| Alma Bolt | MI | Finished Hex Nut | Plain | 1 3/8-12 | 1 3/8-12 sae finished hex nut plain finish | 113 |
| |
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 | hex nut-100 per bag a2 m3-.50 din 934 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 3/8 | 10-24 x 3/8 phillips ovalal m/s ss/chrome plate- | 3000 |
|
| Brikksen | FL | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain | 1 1/4-7 | 1 1/4-7 nylon insert l/n 316ss | inquire |
|
| Brikksen | FL | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/8 x 7/8 | 1/8 x 7/8 roll pin 420ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 7/16-14 x 1 3/4 | 7/16-14 x 1 3/4 hex head cs 316 ss | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 6 | socket set screw cone point a2 m3-.50 x 6 din 914 | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1 1/2 | 8-32 x 1-1/2 soc hd cs s/s | 15000 |
|
| Brikksen | FL | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/2 | 1/4 fender washer 1-1/2 od .050 thick 18-8ss 100 per box f-18 box | inquire |
|
| Brikksen | FL | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #68 | #68 all stainless ribbed rivet | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/8 | 6-32 x 3/8 phillips truss m/s ss | 2000 |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | M8-1.25 x 40 | phillips flat head machine screw a4 ph m8-1.25 x 40 din 965 | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | #10-24 x 3/8 | 10-24 x 3/8 phillips flat m/s 316ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 1/2 | 8 x 1-1/2 square dr ovalal a ss | inquire |
|
| Brikksen | FL | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8 x 30 | spring pin a2 m8 x 30 din 1481 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | #10 x 2 | 10 x 2 phillips truss t-a 18-8ss chrome- | inquire |
|
| Brikksen | FL | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | M8-1.25 x 25 | button socket head cap screw a4 m8-1.25 x 25 iso 7380 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1/2 | 6-32 x 1/2 phillips pan m/s ss | 113000 |
|
| Brikksen | FL | Countersunk Finishing Washer | 316, 317, A4 Stainless | Black Oxide | #8 | #8 flanged finish washer 316 ss/black ox | 15000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 x 7/16 | 6 x 7/16 phillips pan b ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 10 | hex head cap screw full thread a2 m8-1.25 x 10 din 933 | inquire |
|
| EASTERN SCREW | RI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 5/8 | 14 x 5/8 phillips pan type-b 18-8 100ksi tensile | 29120 |
|
| SWACO | OH | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 | 1/4-20 x 1/2 bhcs f/t 18-8 ss | 103 |
|
| SWACO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | ASTM F1941-10 Fe/Zn-Ni | 36 | rivnut m6/2.00-5.00 st zinklad 36 pitch knurl ppap | 61306 |
| |
| SWACO | OH | Flange Nut, Non-locking | Class 10.9 | Plain | M16-2.00 | m16-2.00 hex flange nut pln din 6923-1010 | 350 |
|
| SWACO | OH | CD Weld Stud | Plain | #10-24 x 3/4 | 10-24 x 3/4 cd stud w/flg co | 106 |
| |
| Bossard | AZ | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | blind standoff stainless penn engineering | 5510 |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 1/2 | 10-24 x 1-1/2 slotted round head m/s 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | 2000 |
|
| Brikksen | FL | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 | m5-.8 cap (acorn) nut 18-8 ss 100 per small bag 5 small bags per master pack-generic brand din 1587 | inquire |
|
| Siena | IA | Machine Screw Nut | Grade 2 | Zinc/Clear | #10-32 | 10-32 hex machine screw nut steel grade 2 zinc clear | 100 |
|
| Optimas | IL | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain | 2.25 x 3.00 x .625 | 2.25x3.00x.625 grommet rubber black .25 groove width 2.50 groove dia | 4000 |
|
| American | WI | Pipe Elbow | Black Oxide | 1-90 | 1-90 degree long radius weld on elbow 150# black (1-1/2 radius) | 97 |
| |
| American | WI | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | #10-24 x 1 7/16 | #10-24x1-7/16 phil wafer hd tek screw #3 pt gray stalgard w/ wings | 2500 |
|
| American | WI | Shoulder Bolt (Stripper Bolt) | Steel | Plain | 5/8 x 2 3/4 (1/2-13) | 5/8x2-3/4 soc hd shoulder screw (1/2-13 nc thread) | 136 |
|
| American | WI | Electrical Lugs & Terminals | 1/4 | #2 wire 1/4 stud size ring terminal non-insulated | 105 |
| ||
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Plain | hex machine bolt class 8.8 plain | 49 |
| |
| Coburn Myers Fastening Systems | PA | Hex Tap Bolt (Fully Threaded) | Grade 2 | Zinc/Clear | hex tap bolt (fully threaded) grade 2 zinc/clear | 8 |
| |
| Coburn Myers Fastening Systems | PA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | machine screw 18-8 stainless plain | 957 |
| |
| Coburn Myers Fastening Systems | PA | Hex Machine Bolt | Grade 2 | Zinc/Clear | hex machine bolt grade 2 zinc/clear | 25 |
| |
| Coburn Myers Fastening Systems | PA | Finished Hex Nut | 316, 317, A4 Stainless | Plain | finished hex nut 316 stainless plain | 3 |
| |
| Coburn Myers Fastening Systems | PA | Heavy Hex Nut | Grade 2H | Plain | heavy hex nut a194 grade 2h plain | 254 |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-24 x 1 1/2 | 12-24 x 1-1/2 ph ovalal m/s ss/chrome | inquire |
|
| Brikksen | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 2 1/2 | 5/16-18 x 2-1/2 6-lobe flat type-f ss | inquire |
|
| Brikksen | FL | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 7 | 3/4 x 7 hex lag bolt 18-8ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 1/4 | 1/4-20 x 2-1/4 phillips truss head m/s 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Clevis Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | pivot pin stainless | inquire |
| |
| Brikksen | FL | Lag Screw | Galvanized | 1/2 x 6 | 1/2 x 6 hex lag bolt hdg-25 pcs. | inquire |
| |
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1 | 6-32 x 1 flat socket cs ss | 9000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 5 | 1/2-13 x 5 hex head cs ss with 3 thread f593c | 4000 |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 2 | 3/4-10 x 2 flat soc cs 316ss | 600 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 5/16 | 1/4-20 x 5/16 soc set cp ss | 1000 |
|
| Hewes | NY | Cotter Pin (Split Pin) | Steel | Zinc/Clear | .072 x 1 3/8 | .072x1-3/8 bow tie cotter pin zinc | 98173 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | #8-32 x 1 1/4 | 8-32 x 1-1/4 socket cap full thread 316 stainless | 3 |
|
| FasSpcMfg | FL | Set Screw (Square Head) | 316, 317, A4 Stainless | Plain | 3/8-16 x 2 1/4 | 3/8-16 x 2-1/4 square head set oval point 316 stainless | 4 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 6 | 10-24 x 6 socket cap 18-8 stainless 1-1/8 thread | 16 |
|
| FasSpcMfg | FL | Sockets | 316, 317, A4 Stainless | 3/4-10 x 2 | 3/4-10 x 2 socket set cup point 316 stainless | 40 |
| |
| FasSpcMfg | FL | Machine Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | #10-24 x 3/4 | 10-24 x 3/4 slotted pan head machine screw hastelloy c 276 | 3 |
|
| FasSpcMfg | FL | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | #10-32 x 1 | 10-32 x 1 button head socket cap 316 stainless | 822 |
|
| OneMonroe | MA | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 16 | screw flat head socket m6 x 16 a2 stainless | 800 |
|
| OneMonroe | MA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #6-32 x 3/8 | #6-32 x 3/8 slotted indented hex washer head thread cutting screw type-23 zinc | 19627 |
|
| OneMonroe | MA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-12 x 1 | #10-12 x 1 phillips ovalal head sheet metal screw type-a 18-8 stainless steel | 364 |
|
| OneMonroe | MA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M5-.8-0.80 x 50 | m5-.8 x 50 hex capscrew cl 8.8 plated | 24 |
|
| Brikksen | FL | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 | threaded rod a2 m3-.50 din 975 | inquire |
|
| Empire | WA | USS Flat Washer | Steel | Zinc/Clear | 1 1/8 | 1-1/8 (#) uss flat washer zp | 9 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 x 4 1/2 | hex cap screws 304 ss 3/8-24 x 4-1/2 | 416 |
|
| Raw Produ | NJ | Wood Screw | Brass | Plain | #14 x 1 1/2 | brass phillips flat head wood screws #14 x 1-1/2 | 500 |
|
| Raw Produ | NJ | Fender Washer | Steel | Zinc/Clear | 3/8 x 1 3/4 | fender washers zinc 3/8 x 1-3/4 | 557 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | phillips pan head self drilling screws cr+3 zinc #12-14 x 3/4-#3 point | 6055 |
| |
| Raw Produ | NJ | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3 1/2 | carriage bolts 304 ss 5/16-18 x 3-1/2 | 1120 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1/4 | phillips pan head ms 304 ss #6-32 x 1/4 | 13907 |
|
| Raw Produ | NJ | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Plain | 1/4 x 1 3/4 | phillips flat head tapcon 1/4 x 1-3/4 | 4030 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 16 | metric torx pan head ms a2 ss m4 x .7 x 16m | 3074 |
|
| Raw Produ | NJ | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-3 (.126-.187) | pop rivets 304 ss 4-3 ivory rvt000312 | 8623 |
|
| Raw Produ | NJ | Finished Hex Nut | Grade 5 | Zinc/Clear | 7/8-14 | hex finish nuts grade 5 zinc 7/8-14 | 119 |
|
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain | 256-2 | s-256-2zi pem self-clinching nut heat treated | 8006 |
| |
| AEROSPCE | MN | Self-Clinching Nut | Steel | Plain | self-clinch nut for ultra-thin sheet | 444 |
| |
| National | Ont | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2 x 5 | screw m2 x 5 bhcs ss | 179 |
|
| National | Ont | Split Lock Washer | Steel | Zinc/Clear | 5/8 | 5/8 split lockwasher sz | 2150 |
|
| National | Ont | Slotted Spring Pin (Roll Pin) | Plain | M1 x 5 | m1x5 hvy duty tens pin s iso 8752 | 1000 |
| |
| Mansco | MI | Socket Head Cap Screw | Steel | Plain | M5-0.80 x 8 | M5-0.8x8 soc cap scr pln usa kl 100/box din 912 | 188 |
|
| AFI | FL | Flat Washer | Steel | Zinc/Clear | M5 | m5 flat washer st zn 5.3x15x2 din 7349 () | 700 |
|
| AFI | FL | Solid Rivet | Steel | Zinc/Clear | 3/16 x 1/5 | 3/16x1/5 large flange rivet steel zinc () | 667 |
|
| AFI | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 4 | m3x4 soc set flat pt ss din 913 () | 3177 |
|
| AFI | FL | Protective Caps & Plugs | .66 x 1.06 | .66x1.06 plug polyethylene red () | 3600 |
| ||
| Olander | CA | Set Screw (Socket Head) | Steel | Plain | m2.5-.45 x 3 soc set cup pt alloy | 117 |
| |
| Olander | CA | Cable Clamps & Ties | richco wrap-it tie black .10 x 5.75 | 424 |
| |||
| Olander | CA | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-40 x 3/8 flat soc sst rohs | 596 |
| |
| Olander | CA | Thumb Screw (Plain) | Steel | Plain | 1/4 x 3/4 knurled thumb cap plastic blk | 7 |
| |
| Olander | CA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/8-16 x 5 1/2 hx hd gr 2 zn non-rohs | 6 |
| |
| Olander | CA | Sems Machine Screw | Steel | Zinc/Clear | #8-32 x 5/16 | 8-32x5/16 slotted hwh ext sems stl zn () | 5054 |
|
| SPC | TX | heyco 8465 nylon locknut 3/4 npt thread black | 6000 |
| ||||
| F. Solutions | OH | Socket Head Cap Screw | ASTM A574 | Plain | 3/8-16 x 6 | socket head cap screw 3/8-16x6 alloy steel | 50 |
|
| Komar | IL | Heavy Hex Nut | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/2-13 | 1/2-13 heavy hex nut (7/8x31/64) 416 ss | 2 |
|
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 2017-t4 5/32 x 1/4 | 100 degree countersink 2017-t4 alum. i/a/w rev 3 5/32 x 1/4 dichromate anod.-mil-a-8625 MS20426D5-4D | 0.2818 |
|
| Rapid | NY | Semi-Tubular Rivet | Brass | Black Oxide | .061 x .165 | oval head brass semi-tubular .061x.165 black oxide per mil-f-495 | 19400 |
|
| Rapid | NY | Blind Rivet | Aluminum | Zinc/Clear | lo pro.hd blind multigrip-alum./steel 5/32x.046-.250 grip zinc/clear | 76115 |
| |
| Rapid | NY | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | 12 | flat hd steel rivet-nut open end 10-32 thread x .080-.130 grip zinc i/a/w rev 12 NAS1329Z3-130 | 6661 |
|
| Rapid | NY | Semi-Tubular Rivet | Brass | Zinc/Yellow | .089 x 5/16 | oval head brass semi-tubular .089x5/16 cadmium & yellow chromate | 4700 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 1/8 x 7/16 | 100 degree countersink 5056-h32 alum. i/a/w rev 3 1/8 x 7/16 gold chem film-mil-dtl-5541 MS20426B4-7 | 135.982872570129 |
|
| Rapid | NY | Blind Rivet | Steel | Plain | 1/8 x .125-.187 | countersink hd blind-steel/steel 1/8x.125-.187 grip | 4 |
|
| Rapid | NY | Full-Tubular Rivet | Aluminum | Plain | valve tube-prg510a/mcs510a | 3 |
| |
| Rapid | NY | Latches & Catches | Steel | Cadmium | countersink hd alloy stl rivet-nut open end key 10-32 x.366-.416 grip self-lock cadmium/clear bollhoff | 223 |
| |
| Rapid | NY | Solid Rivet | Aluminum | Plain | 1/4 x 1 | brazier head 5052-h32 aluminum 1/4x1 | 67.6147 |
|
| IPC | VA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 8 | 3/4-10x8 hex cap screw grade 5 steel cr3 zinc rohs | 62,724 |
|
| Pac Bolt | BC | Timber Bolt (Economy Bolt) | Grade A | Galvanized | 1/2 x 16 | 1/2 x 16 a307 timber bolt galv | 50 |
|
| Arden | WI | Machine Screw | Brass | Plain | #8-32 x 1/4 | 832x1/4 slotted fil ms brass pln | inquire |
|
| Arden | WI | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1 x 3/8 | 1420x3/8 button socket shf pin ss pih | inquire |
|
| Arden | WI | Flat Head Socket Cap Screw | Grade 5 | Zinc/Clear | 5618 x 3/4 | 5618x3/4 hxsoc flat gr5 zc | inquire |
|
| Arden | WI | Socket Head Cap Screw | Steel | Zinc/Clear | #8-32 x 3/8 | 832x3/8 hxsoc cs zc | inquire |
|
| ASFCORP | MI | Pipe Nipple | Steel | Plain | 2 x 10 sch 80 xh pipe nipple | 5 |
| |
| THRDFAST | AL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 3/4-10 x 2 1/2 | a325 type-1 str/b w/nut mech b18.2.1 b18.2.6 | 177 |
|
| THRDFAST | FL | Metal Drill Bits | h.s. jobber drill bit #o | 5 |
| |||
| THRDFAST | MS | Metal Drill Bits | 1 | 29/32 red. shank drill bit (1/2in) black/gold | 1 |
| ||
| Lightning | LA | Hex Head Cap Screw | Class 10.9 | Plain | M10-1.25 x 30 | hex c/s fine thread wrench size=16 fine thread | 150 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain | M20-2.50 x 75 | socket c/s | 66 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
