FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Flat Head Socket Cap Screw | Steel | Black Oxide | #6-32 x 5/8 | 6-32 x 5/8 torx plus socket flat head .1177/.1172 steel black oxide camcar camcar | 4145 |
|
| Century | FL | Finished Hex Nut | Plain | ontic eng 119385-01 rev.d nut to print | 9 |
| ||
| Century | FL | Slotted Round Nut (Shaft Nut) | Plain | 1.56-18 | ms19068-081 nut plain round 1.56-18 | 250 |
| |
| Century | FL | Socket Head Cap Screw | Plain | #4-40 x 1/8 | nas1352c04-2 | 425 |
| |
| Century | FL | Machine Screw | Plain | m83248/2-916 o-ring | 758 |
| ||
| Century | FL | pem tso-256-312 tso-256-312 | 100 |
| ||||
| Century | FL | Split Lock Washer | Steel | Zinc/Clear | M3.5 | m3.5 stl mech zn clr din 128a | 179000 |
|
| Century | FL | Cotter Pin (Split Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 x 25 | m4 x 25 s/s din 94 | 74 |
|
| GLF | OH | Cushioned Pipe & Tube Loop Clamp | 1/4 | 1/4 cushioned loop clamp | 100 |
| ||
| GLF | OH | Button Head Socket Cap Screw | Steel | Plain | 5/16-24 x 5/8 | 5/16-24 x 5/8 bhcs stl pln | 90 |
|
| GLF | OH | Sems Machine Screw | Steel | Zinc/Clear | #10-32 x 3/8 | #10-32 x 3/8 phillips pan hd sems int l/w stl zc | 568 |
|
| GLF | OH | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 | 3/8-16 fin hex nut 18-8 s/s | 5338 |
|
| GLF | OH | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/2-20 x 2 1/4 | 1/2-20 x 2-1/4 hhcs gr 8 stl zy | 30 |
|
| GLF | OH | CD Weld Stud | Steel | Plain | M8-1.25 x 16 | m8-1.25 x 16 cd flange weld stud l/c stl cpr | 12419 |
|
| GLF | OH | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 1/4 | #8-32 x 1-1/4 phillips flat hd m/s stl zc | 549 |
|
| GLF | OH | Carriage Bolt | Grade 8 | Zinc/Yellow | 7/16-14 x 3 1/2 | 7/16-14 x 3-1/2 carriage bolt f/t gr 8 stl zy | 166 |
|
| GLF | OH | Heavy Hex Nut | Steel | Zinc/Clear | 5/16-18 | 5/16-18 hvy hex nut stl zc | 8933 |
|
| NAPPCO | TX | Finished Hex Nut | Steel | Plain | 3/4-24 | hex nut 3/4-24 southco | 100 |
|
| NAPPCO | TX | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 25 | phillips pan m/s s/s a2 m4-0.7x25 din 7985 | 400 |
|
| OneMonroe | MN | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 7/8 x 5 1/2 | 7/8 x 5 1/2 a325 hhb | 18 |
| |
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | M2-0.40 x 3 | m2-.4 x 3 ph wafer head m/s 302 ss blk ox | 13700 |
|
| OneMonroe | MN | Safety Glasses & Eye Protection | camo frame/sandstone bronze anti-fog lens with black cord | 2 |
| |||
| OneMonroe | MN | Machine Bushings | Plain | bushing cat ii quick hitch per print mpi rev. b 10-24-17 | 5 |
| ||
| OneMonroe | MN | Machine Screw | Steel | Cadmium | #10-24 x 1 3/8 | 10-24x1-3/8 phillips pan hd ms stl & .0003 cad & empigard per gm 6184m | 30000 |
|
| OneMonroe | MN | Weld Pin | Steel | Plain | 3 | 4mm x 16mm 3 proj (bottom) weld pin steel plain | 2059 |
|
| OneMonroe | MN | SAE Flat Washer | Black Oxide | 1/4 | 1/4 sae flat washer-black oxide | 6101 |
| |
| OneMonroe | MN | USS Flat Washer | Grade 8 | Plain | 1 | 1 uss gr8 fw | 16 |
|
| OneMonroe | MN | Spring Steel Lock Nut (PalNut, etc.) | Nylon (Polyamide) | Plain | nylon grille nut-nissan | 0.2 |
| |
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Rubber, Buna-N, Neoprene etc. | Plain | M17 x 35 x 10 | 17x35x10mm light series radial ball bearing 2 rubber seals 70% grease fitting | 4 |
|
| OneMonroe | MN | Carriage Bolt | Grade 5 | Zinc/Clear | 7/16-14 x 4 | 7/16-14 x 4 gr.5 carr bolt-zp | 250 |
|
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/16 | screw socket cap 8-32x5/16 s/s | 4030 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 5/16 x 3/8 | 5/16 x 3/8 skt should scs | 71 |
|
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6 x 1/2 | 6 x 1/2 slotted hex washer head tap screw zinc | 1.7 |
|
| OneMonroe | MN | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Plain | M6-1.00 | auvecopak free spinning washer nut m6-1.0 | 1 |
| |
| OneMonroe | MN | Metal Drill Bits | Steel | 31/64 | 31/64 h.s. drill bit jobber metorite | 5 |
| |
| OneMonroe | MN | Sockets | 3 x 42 | 3 x 42 universal absorbent sock w/cellulose blend filling 40/case | 1 |
| ||
| OneMonroe | MN | Rod Ends, Heim Joints, Rose Joints | Steel | Plain | 3/8-16 x 6.06 | 3/8-16 x 6.06 (ctr to end)dwg rod end .391-.373 eye stl | 243 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | #10-24 x 3/4 | 10-24 x 3/4 slotted truss ms zp | 50 |
|
| OneMonroe | MN | Rod End Clip, Lock Rod Clip | Plain | disc-door lock rod clip | 0.48 |
| ||
| UNEEDA | NJ | Self-Tapping Self-Piercing Screw | Steel | Plain | #8 x 1/2 | #8x1/2 slotted hex w/h self pierce | 38000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 9 | Phosphate | 1/4-20 x 3/8 | 1/4-20x3/8 gr.9 (alloy)-frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Phosphate | M12-1.75 x 30 | M12-1.75x30 cl.10.9 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) din 6921 | 10000 |
|
| NBS | CA | 12 Point Flange Screw (CounterBore) | Steel | Black Oxide | 7/16-14 x 2 1/2 | 7/16-14x2-1/2 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| Alma Bolt | MI | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Plain | #8-32 x 3/4 | #8-32 x 3/4 pan phillips type-f thread cutting | 1849 |
| |
| QCS | OR | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/8-24 x 1 1/4 | 3/8-24x1-1/4 hex cap screw grade 8 zinc yellow | 400 |
|
| QCS | OR | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Yellow | 1/4-20 x 3/4 | 1/4-20x3/4 phil pan tcs type-f zinc yellow | 1640 |
|
| Alma Bolt | MI | Machine Bushings | Plain | #37-02 | #37-02 1 3/8 od x 7/8 id 10gg regular machinery bushing | 2374 |
| |
| QCS | OR | Coiled Pin (Spiral Spring Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/32 x 5/16 | 3/32x5/16 coiled spring pin 420 s/s | 1198 |
|
| QCS | OR | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2-13 x 4 | 1/2-13x4 hex cap screw gr.5 zinc | 75 |
|
| Alma Bolt | MI | Grease Fittings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8-27 | 1/8-27 45 stainless st grease fitting | 47 |
|
| Alma Bolt | MI | Tapered Pin | Steel | Plain | 8 x 6 | #8 x 6 steel taper pin | 136 |
|
| QCS | OR | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10 x 1/2 | 10x1/2 slotted hwh s/m/s type-b zinc rohs | 3000 |
|
| CIF | IL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1/2 | 1/2-13 x 1/2 hex cap screw 18-8 stainless steel | 48 |
|
| CIF | IL | Button Head Socket Cap Screw | Class 10.9 | Plain | M16-2.00 x 40 | m16 x 2.0 x 40 button head socket cap screw 10.9 plain | 9279 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/8 | 8-32 x 5/8 soc head cs ss | 27000 |
|
| Brikksen | FL | Split Lock Washer | 316, 317, A4 Stainless | Plain | M30 | split lock washer a4 m30 din 127b | inquire |
|
| Brikksen | FL | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 | hex domed cap nut (acorn nut)-100 per bag a2 m5-.80 din 1587 | 200 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M18-2.50 x 70 | hex head cap screw full thread a2 m18-2.5 x 70 din 933 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 x 1 3/4 | 12 x 1-3/4 slotted indented hex washer type-a ss | 1000 |
|
| Brikksen | FL | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Class 10.9 | Zinc/Clear | M8-1.25 x 35 | hex flange bolt serrated tensilok m8-1.25 x 35 class 100 steel zinc | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 x 1/2 | 3/8-24 x 1/2 soc set cp 18-8 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 8 | slotted flat head machine screw a2 m5-.80 x 8 din 963 | inquire |
|
| Brikksen | FL | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain | 1/2-20 | 1/2-20 nylon l/n 316ss | 20 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10 x 3/4 | 10 x 3/4 hex washer a 410ss | 12000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1/2 | #8 x 1/2 phillips pan head sms type-a bp 18-8 ss 100 per clam 5 clams per box-fasco brand | inquire |
|
| Brikksen | FL | Flat Washer | Silicon Bronze | Plain | 7/16 | 7/16 flat washer 1-1/8 od x .062 thick silicon bronze | inquire |
|
| Brikksen | FL | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2 | ideal #40 ss hose clamp 2 to 3 | inquire |
| |
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 4 | 1/2-13 x 4 soc head cs ss | 10 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1/2 | 5/16-18 x 1/2 soc hd cs ss | inquire |
|
| Brikksen | FL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | 1/2 all stainless self-drilling (tek) screw stud #2 philips drive | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 3/4 | 10-24 x 1-3/4 socket head cap screw 18-8 ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | 1/4-20 x 5 | 1/4-20 x 5 phillips trus machine screw ss/bright chrome- | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 16 | slotted cheese head machine screw a2 m3-.50 x 16 din 84 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 10 | slotted flat head machine screw a2 m6-1.0 x 10 din 963 | inquire |
|
| SWACO | OH | Hex Head Cap Screw | Steel | Zinc/Clear | M10-1.25 x 100 x 960 | M10-1.25x100 hex hd c/s d960 zinc | 166 |
|
| SWACO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | cal1-610-4.2 m6 stainless steel rivet nut | 847 |
|
| Bossard | AZ | Finished Hex Nut | Steel | Plain | hex nut 1/2-13 thread | 5687 |
| |
| Siena | IA | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M12-1.75 x 30 | m12 x 1.75 x 30 hex head cap screw steel 10.9 zinc clear full thread din 933full thread | 40 |
|
| Optimas | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #4-40 x 3/4 | 4-40 x 3/4 phillips pan t/s steel zinc trivalent trilobe rohs compliant | 10000 |
|
| Optimas | IL | Hex Head Cap Screw | Grade 5 | Plain | 5/8-11 x 2 | 5/8-11 x 2.000 asme b18.2.1 hex cap screw gr 5 | 370 |
|
| Optimas | IL | Finished Hex Nut | Brass | Plain | M5-0.80 | m5x0.8 hex nut brass cda 360 6.27/6.43mm across the flats x 1.8/1.98mm thick per drawing | 3155 |
|
| American | WI | Machine Taps | Steel | M30-3.50 | m30-3.5 plug tap 4 flute eco-pro | 1 |
| |
| American | WI | Latches & Catches | Fiber | Plain | 1 1/4 | 1-1/4 id silco sleeve firesleeve aerospace grade (silicone coated fiberglass braided sleeve) | 26 |
|
| Empower H | IL | Pulleys & Sheaves | Iron | Nickel Plated | 01 | 0178m-1-1/2 malleable iron nickel plated swivel eye pulleysdouble wheelsize sheave-1-1/2 diameter rope-1/4 eye diameter-1/2 | 500 |
|
| Delta | TX | Flat Washer | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 1/2 | special flat monel 400 ((1.062 OD X .531ID X .062)) | 190 |
|
| Brikksen | FL | Wood Screw | Brass | Nickel Plated | 5/8 | 5/8 brass nickel stud w/ss screw | 5000 |
|
| Coburn Myers Fastening Systems | PA | Threaded Rod | Steel | Zinc/Clear | threaded rod carbon steel zinc/clear | 372 |
| |
| Coburn Myers Fastening Systems | PA | Hex Machine Bolt | Grade 2 | Zinc/Clear | hex machine bolt grade 2 zinc/clear | 47 |
| |
| Coburn Myers Fastening Systems | PA | Fender Washer | Steel | Zinc/Clear | fender washer carbon steel zinc/clear | 3130 |
| |
| Coburn Myers Fastening Systems | PA | Hex Machine Bolt | Grade 2 | Zinc/Clear | hex machine bolt grade 2 zinc/clear | 218 |
| |
| AIH | AZ | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | #2-56 x 9/16 | 2-56x9/16 soc cap screw 316 s/s | 1 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 2 | 10-24 x 2 phillips flat head m/s 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | 500 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-20 x 1 1/2 | 1/2-20 x 1-1/2 soc hd cs ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 5/8 | 5/16-18 x 5/8 soc hd cs ss | 400 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M16-2.00 x 45 | hex head cap screw full thread a4 m16-2.0 x 45 din 933 | 50 |
|
| Brikksen | FL | Screwdriving Insert Bits & Power Bits | Steel | 2 3/4 | #2 phillips bit (long) 2-3/4 long 1/4 hex drive 10 per small bag 5 small bags per master pack-generic brand | inquire |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 3/4 | 1/4-20 x 1 3/4 phillips truss m/s ss/nylon patch | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | #8-32 x 1 | 8-32 x 1 phillips flat m/s ss/blk xylan | 1000 |
|
| BEACON | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-32 x 3/8 | 10-32 x 3/8 phillips flat undercut head trilobe thread forming screw case hardened steel trivalent zinc, bake & wax rohs compliant | 40000 |
|
| Hewes | NY | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 5 | 3/4-10x5 full thread stud a193 b7 xylan | 64 |
|
| Hewes | NY | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Grade 5 | Zinc/Clear | 1/4-20 x 5/8 | 1/4-20x 5/8 hex serrated | 10950 |
|
| FasSpcMfg | FL | Set Screw (Slotted Head) | ASTM A574 | Plain | 5/16-24 x 1 | 5/16-24 x 1 15/16 slotted set cup pt alloy | 4 |
|
| NutsBolts | NE | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 4 1/4 | 3/4 x 4 1/4 ss wedge anchor | 1 |
|
| OneMonroe | MA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2-13 x 1 1/4 | screw hex cap 1/2-13x1 1/4 grade 5/zc | 278 |
|
| OneMonroe | MA | USS Flat Washer | Silicon Bronze | Plain | 1/2 | 1/2 uss flat washer sili.bronze | 190 |
|
| OneMonroe | MA | Coupling Nut | Steel | Zinc/Clear | 5/16-18 x 1/2 | 5/16-18 heavy coupling nut plated | 185 |
|
| OneMonroe | MA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 | 7/16-20 nylon insert l/n stainless | 57 |
|
| OneMonroe | MA | Flat Head Socket Cap Screw | Steel | Black Oxide | M12-1.75-1.75 x 40 | m12-1.75 x 40mm flat hd socket cap screw steel/black oxide | 800 |
|
| Brikksen | FL | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 | threaded rod a2 m8-1.25 din 975 | 20 |
|
| Empire | WA | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25 x 130 | m8(1.25) x 130 hex 10.9 c/s zp din 931 | 98 |
|
| Empire | WA | Socket Head Cap Screw | Class 12.9 | Plain | M8-1.25 x 35 | m8 (1.25) x 35 soc 12.9 c/s | 1400 |
|
| Empire | WA | 321 8-32 | #321 -8-32 h.s. gun tap | 13 |
| |||
| Field Fas | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-32 x 1/2 | 10-32 x 1/2 phillips pn trilobular thread rolling screw stl zc/rohs | 2300 |
|
| Scheinert | NJ | Wood Screw | Steel | Black Oxide | #8 x 2 1/4 | 8x2-1/4 flat phillips 17 w/nibs d.t. steel hard & black ox./phos. | 7500 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 x 1 1/2 | slotted hex washer head sms 304 ss #12 x 1-1/2 | 2099 |
|
| Raw Produ | NJ | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 7/8-9 x 4 | structural bolts a325 plain 7/8-9 x 4 | 500 |
| |
| Raw Produ | NJ | Machine Screw | 316, 317, A4 Stainless | Plain | #10-24 x 2 1/2 | phillips pan head ms 316 ss #10-24 x 2-1/2 | 441 |
|
| Raw Produ | NJ | Flat Washer | Steel | Plain | #12 x 1 1/4 | metalgrip sell driller roofing t3 screws w/o washer-slate-#12 x 1-1/4 | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1/2-13 x 7/8 | hex cap screws grade 2 zinc 1/2-13 x 7/8 | 351 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/8-11 x 1 3/4 | hex cap screws grade 5 zinc 5/8-11 x 1-3/4 ft | 149 |
|
| Raw Produ | NJ | Heavy Hex Nut | Steel | Zinc/Clear | 3/4-10 | zinc heavy hex nuts-3/4-10 | 192 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #12 x 1 1/4 | phillips pan head sms black oxide 304 ss #12 x 1-1/4 | 2347 |
|
| Fastenerc | OH | Machine Screw | Steel | Zinc/Clear | #6-32 x 1 | 6-32 x 1 steel flat slottedmach screw zinc | 4225 |
|
| Fastenerc | OH | Semi-Tubular Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | 3/32 x 1/8 | 3/32 x 1/8 steel oval semi-tub rivet zinc | 4500 |
|
| Fastenerc | OH | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/4 | 8-32 x 3/4 steel truss slottedmach screw zinc | 5000 |
|
| Fastenerc | OH | Machine Screw | Steel | Zinc/Clear | #10-24 x 1 | 10-24 x 1 steel truss slottedmach screw zinc | 10225 |
|
| Mil-Spec | MD | Machine Screw | Steel | Black Oxide | #4-40 x 3/8 | 4-40 x 3/8 unslotted indented hex head machine screw steel black oxide | 43000 |
|
| AEROSPCE | MN | fh-440-6zi pem .375long(flush-head)self-clinching | 5500 |
| ||||
| AEROSPCE | MN | 91-600-63 southco | 100 |
| ||||
| F. Solutions | OH | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 3/4-10 x 11 | stud full thread 3/4-10x11 a193 b7 zinc plated | 4 |
|
| F. Solutions | OH | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 9/16-18 x 3 1/2 | hex head cap screw 9/16-18x3-1/2 grade 8 zinc yellow | 23 |
|
| F. Solutions | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M10-1.50 x 130 | hex head cap screw din 931 m10-1.5x130 8.8 zinc | 50 |
|
| National | Ont | Plastic Push-In Rivets (Plasti-Rivet etc.) | sticker-tite | 145 |
| |||
| WINA | MN | Self-Tapping Drive Screw (type u) | Aluminum | Plain | 2 x 1/8 | round head type-u drive screw rd 18 8 2x1/8 | 8750 |
|
| Mansco | MI | Machine Screw | Steel | Zinc/Black | 6-32 x 3/8 flat u/c phil m/s triv blk znc | 233359 |
| |
| Mansco | MI | SAE Flat Washer | Steel | Zinc/Yellow | .649 | .649/.686 idx1.305/1.342 odx.177/.197 thk-5/8 sae f/w triv znc yellow thru | 1600 |
|
| Mansco | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10-12 x 5/8 | 10-12 x 5/8 inhxwa slot type-a triv znc | 12 |
|
| Mansco | MI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | Zinc/Clear | 3 x 24 x 80 grit bluefire sanding belt y-wt cotton z/a open coat 5/box | 40 |
| |
| Mansco | MI | M12-1.50 | M12-1.50 hss 4 flute plug hand tap bright 6/box | 2 |
| |||
| AFI | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/4 | 6-32x3/4 phil oval ms ss () () | 1750 |
|
| AFI | FL | Hex Head Cap Screw | Steel | Zinc/Clear | 5/16-18 x 1 3/4 | 5/16-18x1-3/4 hex hd cs g5 st zn rohs () () | 718 |
|
| AFI | FL | low profile with hold-in detent () | 510 |
| ||||
| Olander | CA | Round Spacer | Aluminum | Black Oxide | 1/4 x 5/8 x 1/2 rnd spcr alum blk anod | 892 |
| |
| Olander | CA | Machine Screw | Steel | Zinc/Clear | m4-.7x6 6-lobe ms stl zn/ifi 524 patch | 1383 |
| |
| Olander | CA | Round Spacer | Aluminum | Plain | #4 x 1/8 x 3/16 rnd spacer alum gold irr | 704 |
| |
| Olander | CA | Machine Screw | Nylon (Polyamide) | Plain | 2-56 x 5/32 slot bind nyl | () | 1524 |
| |
| Olander | CA | Latches & Catches | southco comp latch () () | 36 |
| |||
| Olander | CA | Spring-Loaded Plunger Pin, Pop Pin | Plastic | Plain | 1/2-13 | 1/2-13 plung ss/delrin nose () () | 26 |
|
| Mansco | MI | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 3/4-16 hex jam nylon insert locknut nte pattern triv znc | 443 |
| |
| Olander | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 1/4-20 x .020 | popnut rivnut 1/4-20 x .020-.080 grip () | 2000 |
| ||
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | Steel | Painted | #8-15 x 1/2 | #8-15 x 1/2 self-piercing screws, 1/4 tall indented hex washer head unslotted, twin lead, full thread, sharp point, steel cer white 1000hr, head painted musket brown | 6,000 |
|
| Rapid | NY | Solid Rivet | Brass | Plain | 5 3/16 x 3/8 | univ.head brass per astm b 134/b 134m i/a/w rev 6 3/16 x 3/8 MS20615-6B6 | 66.2815028901719 |
|
| Rapid | NY | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 100deg.countersink 300 stain.steel annealed 3/16x1-5/8 passivated no head mark | 16.2365 |
| |
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 2017-t4 3/32 x 11/32 | universal head 2017-t4 aluminum i/a/w rev 2 3/32 x 11/32 clear anodize/mil-a-8625 MS20470D3-5A5 | 2 |
|
| Rapid | NY | Blind Rivet | Steel | Plain | 3/16 x 1 | pan head mild steel i/a/w rev a 3/16 x 1 MS35743-22 | 24 |
|
| Rapid | NY | Semi-Tubular Rivet | Aluminum | Plain | .095 | oval head 5056-h32 alum. semi-tubular .095/.099x11/64 .187 head diam.plain | 96012 |
|
| Rapid | NY | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | at x .020-.280 | flat hd stain.steel plusnut 1/4-20 threadx.020-.280 grip | 1 |
|
| Rapid | NY | Lock Bolt with Collar (HuckBolt etc.) | Steel | Cadmium/Yellow | hi-lok pin 100 deg. countersink. flush tension head alloy steel .190-32 unjf-3a 3/16 dia.x3/8 max. grip cadmium qq-p-416 type-2 & cetyl alcohol lube with hl86 collar | 1 |
| |
| Rapid | NY | Solid Rivet | Steel | Plain | 1/8 x 15/16 | round/button head mild steel 1/8x15/16 | 11.218 |
|
| Parker | AZ | Socket Head Cap Screw | Steel | Passivated | #10-32 x 1 | 10-32 x 1.00 socket head cap screw fully threaded 302 s/s passivate per nas1351c3-16 dual cert ms16996-14 made in u.s.a. | 112000 |
|
| QCS | OR | Protective Caps & Plugs | Plastic | Plain | #13 blue caplug alliance plastics | 16341 |
| |
| F. Solutions | OH | Shoulder Bolt (Stripper Bolt) | Steel | Plain | 5/16 x 1 1/2 (1/4-20) | shoulder bolt 5/16x1-1/2 alloy (1/4-20) | 159 |
|
| Arden | WI | Machine Screw | 400 Stainless (405, 410,416,420,430 etc.) | Zinc/Clear | 1 x 1 1/4 | 1420x1 1/4 torx button ms zc | inquire |
|
| Arden | WI | Set Screw (Square Head) | Steel | Zinc/Clear | 3816 x 1/2 | 3816x1/2 square set cup zc | inquire |
|
| Arden | WI | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | 1 1/8-7 x 6 1/2 | 1 1/8-7x6 1/2 hcs gr5 zy | inquire |
|
| BHAM | AL | Metal Drill Bits | 9/32 | 9/32 stubby drill bit | 4 |
| ||
| BAYFASTCO | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 1/2-13 x 2 | 1/2-13x2 a325-1 dom.. str/b | 1191 |
|
| THRDFAST | MS | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 5/8-11 x 5 3/4 | a193 b7 a/t stud teflon blue b18.2.1 b18.31.2 | 3 |
|
| THRDFAST | OK | Hex Head Cap Screw | Grade 5 | Galvanized | 1/4-20 x 3/4 | gr5 hex c/s hdg b18.2.1 | 12 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7M | Plain | 7/8-9 x 9 3/4 | astm a193 b7m all thread stud | 701 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 5/8-11 x 4 | 5/8-11x4 astm a193 b8m 1 all thread stud teflon blue | 716 |
|
| Lightning | LA | Heavy Hex Nut | Grade 2H | Plain | 9/16-12 | astm a194 gr. 2h heavy hex nut | 886 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7M | Zinc/Yellow | 5/8-11 x 4 | astm a193 b7m all thread stud | 100 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Plain | 1-8 x 11 | 1-8x11 astm a320 l7 all thread stud | 781 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
