| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Panel Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 | ms25082-c12 ms25082-c12 | 873 |
|
| Century | FL | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | nas1130-4f-10 | 216 |
| |||
| Century | FL | Socket Head Cap Screw | null | Cadmium | 3/4-10 x 3/4 | 3/4-10 x 3/4 socket cap alloy cad yel qq-p-416 ty ii patch per mil-f-18240 | 181 |
|
| Century | FL | Blind Rivet | Steel | Zinc/Clear | 5/32 (.031-.062) | cherry cr3213-5-11 vechecr3213-5-11 | 180 |
|
| Century | FL | Electrical Lugs & Terminals | Aluminum | 16-14 | 14-1643 1 x 24 sand belt rev 14-1643 1 x 24 sand belt resin bond alum oxide bias joint or butt joint 80 grit rev | 180 |
| |
| Century | FL | Shim Washer (Round, Slotted, Square etc.) | Plain | 208300pt-45 rev a shim per print | 180 |
| ||
| Century | FL | Finished Hex Nut | Grade 8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 7/8-9 | 7/8-9 hex nut g-8 zinc-flake duplex e2a | 180 |
|
| Century | FL | Finished Hex Nut | Plain | M3m463 | 3m463n12a48-1 nut assembly | 180 |
| |
| Century | FL | Flat Washer | Steel | Zinc/Clear | M3 | m 3.0 stl zi flat washers m3 din 125 | 1180 |
|
| Century | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M8 x 14 | m8 x 14 soc cs a4-80 ss din 912 | 80 |
|
| Century | FL | Finished Hex Nut | Nylon (Polyamide) | Plain | M6 | m6 hex nut nylon din 934 | 180 |
|
| Century | FL | Coiled Pin (Spiral Spring Pin) | Steel | Phosphate | 3/32 x 5/8 | ms16562-121 nasm16562-121 | 180 |
|
| Century | FL | Flat Head Socket Cap Screw | Plain | ms24667-14l | 180 |
| ||
| Century | FL | Flat Washer | Cadmium/Yellow | 1/4 | ms27183-11 | 180 |
| |
| Century | FL | Tooth Lock Washer (Int. & Ext.) | Plain | 3/8 | ms35333-76 | 180 |
| |
| Century | FL | Springs (Compression) | parker 1800942 compression spring q2b music wire .065 dia (see print) rev b | 177 |
| |||
| Century | FL | Fully Threaded Stud (All Thread) | Grade 5 | Zinc/Clear | 5/16-18 x 5.692 | 5/16-18 x 5.692 double end stud gr 5 rev f .75 full thread both ends chamfered zinc pl | 173 |
|
| Century | FL | Machine Mounts, Casters, Leg Levelers | 1/2 x 3 5/8 | caster swivel 2 1/2 polyolefin caster swivel 2 1/2 polyolefin wheel-bearing top plate 2 1/2 x 3 5/8 overall tp size 200# capacity | 161 |
| ||
| Century | FL | Socket Head Cap Screw | null | Zinc/Clear | 1/4-20 x 1/2 | 1/4-20 x 1/2 socket cap alloy stl zinc plt | 160 |
|
| Century | FL | Machine Screw | Cadmium/Yellow | .190-32 | nas514p1032-10p | 154 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.

