FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | MN | Service & Repair Kits (Bolt Packs) | Steel | Plain | bolt bag kdc5010-009 | 40 |
| |
| OneMonroe | NC | Carriage Bolt | Grade 5 | Zinc/Clear | 3/4-10 x 4 1/2 | 3/4-10 x 4-1/2 zinc finish sae j429 grade 5 round head carriage bolt | 3 |
|
| OneMonroe | NC | Carriage Bolt | Grade 5 | Plain | 5/16-18 x 1 1/2 | 5/16-18 x 1-1/2 plain finish sae j429 grade 5 round head carriage bolt | 214 |
|
| OneMonroe | NC | Carriage Bolt | Grade 5 | Plain | 3/8-16 x 3/4 | 3/8-16 x 3/4 plain finish sae j429 grade 5 round head carriage bolt | 750 |
|
| OneMonroe | NC | Carriage Bolt | Grade 5 | Plain | 3/8-16 x 1 1/2 | 3/8-16 x 1-1/2 plain finish sae j429 grade 5 round head carriage bolt | 784 |
|
| OneMonroe | NC | Carriage Bolt | Grade 5 | Plain | 5/8-11 x 2 1/2 | 5/8-11 x 2-1/2 plain finish sae j429 grade 5 round head carriage bolt | 47 |
|
| OneMonroe | NC | Carriage Bolt | Grade 5 | Plain | 5/8-11 x 3 | 5/8-11 x 3 plain finish sae j429 grade 5 round head carriage bolt | 18 |
|
| OneMonroe | NC | Metal Drill Bits | Steel | 0.159 | #21 x 6 aircra ft length drill bit | 11 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 0.159 | #21 stubby drill bit | 11 |
| |
| OneMonroe | NC | Metal Drill Bits | Titanium | 0.159 | #21 titanium nitride coated drills | 9 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 5 x 1 1/2 | 5 x 1-1/2 hitemp grip ring caster | 4 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 7/16 x 1 3/8 | caster swivel grip neck stem stm sz 7/16 x 1-3/8 wheel sz 4 x 1-1/4 wheel mat hard rubber bearing plain bore load ht 5 load cap 350 lbs temp rt-40 to +160 f | 60 |
|
| OneMonroe | NC | Screwdriving Insert Bits & Power Bits | Steel | 21 | 21 slotted bit tip-short | 5 |
| |
| OneMonroe | NC | Lock Nut, Nylon Insert | Steel | Zinc/Clear | nylon insert stop nuts-light hex standard height (nm & ne series) steel zinc | 180 |
| |
| OneMonroe | NC | Hitch Pin | Steel | Plain | 21 | 21 hitch pin (by number) | 260 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Steel | Zinc/Clear | #6-32 | nut hex nylon insert/thin pattern 6-32 thread steel/zinc | 1718 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Steel | Zinc/Clear | nylon insert stop nuts-heavy hex standard height (nu series) steel zinc | 262 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 5/8 | csb 204-10 insert bearing with 5/8 bore. triple lip labyrinth seal. (2) set screws at 120 degrees. per mpi rev. b 12/2/2019 | 48 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5205 stainless stl. radial ball bearing with (2) rubber seals. rubber seal to have customer part number shown. | 1 |
| |
| OneMonroe | NC | Cap Nut (Acorn Nut) | Steel | Zinc/Clear | 2 3/8 x 3 5/8 | caster swivel plate w/top lock brake wheel sz 4 x 1-1/4 wheel mat polyurethane on polyolefin bearing precision ball top plt sz sz 2-3/8 x 3-5/8 bolt hole ptrn 1-3/4 x 2-7/8 to 3 load cap 250 lbs. per caster | 10 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
