FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| MAINSOURC | NH | Self-Clinching Standoff | Steel | Zinc/Clear | #4-40 x .375 | pem so-6440-12 | 4036 |
|
| MAINSOURC | NH | Self-Clinching Standoff | Steel | Zinc/Clear | #8-32 x .187 | pem so-832-6 | 175 |
|
| MAINSOURC | NH | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x .312 | pem sos-440-10 | 155 |
|
| MAINSOURC | NH | Self-Clinching Standoff | Steel | Zinc/Clear | #6-32 x .500 | pem so-632-16 | 40 |
|
| OneMonroe | NC | Metal Drill Bits | Steel | #46 | #46 brute platinum hvy duty drill | 16 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 4 x 2 | 4 x 2 rigid caster 2500 lb capacity | 4 |
| ||
| OneMonroe | NC | Electrical Lugs & Terminals | 15-32 | 15-32 h/s bullet point jobber drill bit | 6 |
| ||
| OneMonroe | NC | Metal Drill Bits | Steel | 15/32 | 15/32 h.s. drill bit jobber metorite | 11 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 15/32 | 15/32 jobber drill (3/8 shank) | 6 |
| |
| OneMonroe | NC | Service & Repair Kits | hardware kit | 585 |
| |||
| OneMonroe | NC | Service & Repair Kits | hardware kit walkway | 459 |
| |||
| OneMonroe | NC | Service & Repair Kits | hardware kit abs support/cove | 650 |
| |||
| OneMonroe | NC | Service & Repair Kits | hardware kit abs | 544 |
| |||
| OneMonroe | NC | Service & Repair Kits | hardware kit masking unit & sweep guard | 588 |
| |||
| OneMonroe | NC | Knobs & Star Grips | knurled knob | 15 |
| |||
| OneMonroe | NC | Quick Access Panel Fasteners (1/4 Turn etc.) | 1/4-20 | captive screw 1/4-20 thread flare-in slotted recess knurled black knob | 25 |
| ||
| OneMonroe | NC | Quick Access Panel Fasteners (1/4 Turn etc.) | 8-32 | captive screw 8-32 thread flare-in slotted recess knurled black knob | 7 |
| ||
| OneMonroe | NC | Quick Access Panel Fasteners (1/4 Turn etc.) | #10-32 | captive screw 10-32 thread flare-in phillips recess knurled bright knob | 40 |
| ||
| OneMonroe | NC | Bent Anchor Bolt (J-Bolt, L-Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | non-locking paddle handle stainless long angle bolt | 4 |
| |
| OneMonroe | NC | Quick Access Panel Fasteners (1/4 Turn etc.) | 6-32 | captive screw 6-32 thread press-in phillips recess knurled black knob | 440 |
| ||
| OneMonroe | NC | Quick Access Panel Fasteners (1/4 Turn etc.) | 4-40 | captive screw 4-40 thread press-in phillips recess knurled bright knob | 1145 |
| ||
| OneMonroe | NC | Service & Repair Kits | hardware kit sensor | 561 |
| |||
| OneMonroe | NC | Quick Access Panel Fasteners (1/4 Turn etc.) | M3 x 0.5 | captive screw m3 x 0.5 press-in phillips/slot combination knurled bright knob ncnr | 31 |
| ||
| OneMonroe | NC | Quick Access Panel Fasteners (1/4 Turn etc.) | M6-1.60-1.60 | captive screw m6 x 1.0 press-in phillips recess knurled bright knob | 27 |
| ||
| MAINSOURC | NH | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x .688 | pem sos-440-22 | 553 |
|
| MAINSOURC | NH | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 0-2 | pem sp-0420-2 | 49 |
|
| MAINSOURC | NH | Self-Clinching Nut | Steel | Plain | M4-2.00 | pem sp-m4-2 | 826 |
|
| MAINSOURC | NH | Self-Clinching Nut | Steel | Plain | pem sp-m5-2 | 10 |
| |
| MAINSOURC | NH | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | #10-24 | pem ss-024-0 | 340 |
|
| MAINSOURC | NH | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | #10-32 | pem ss-032-2 | 243 |
|
| MAINSOURC | NH | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | #10-32 | pem ss-032-3 | 39 |
|
| MAINSOURC | NH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | pem stkb-440-4 | 9 |
| |||
| MAINSOURC | NH | pem tps-4mm-8 | 48 |
| ||||
| MAINSOURC | NH | Self-Clinching Standoff | Steel | Plain | pem tso-256-375 | 80 |
| |
| MAINSOURC | NH | Self-Clinching Standoff | Steel | Plain | pem tsos-6256-437 | 50 |
| |
| MAINSOURC | NH | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 15-375 | pic d15-375 (1/16x3/8 dowel pin 416 ss) | 764 |
|
| MAINSOURC | NH | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 16-875 | pic d16-875 (dowel pin 3/32x7/8 416 ss) | 50 |
|
| MAINSOURC | NH | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 17-375 | pic d17-375 (1/8x3/8 dowel pin 416 ss) | 50 |
|
| MAINSOURC | NH | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8 x 1 | 1/8x1 dowel pin 303 ss slip fit | 42 |
|
| MAINSOURC | NH | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3-187 | pic d3-187 (1/16x3/16 dowel pin ss) | 50 |
|
| MAINSOURC | NH | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3-250 | pic d3-250 (1/16x1/4 dowel pin 303 ss) | 90 |
|
| MAINSOURC | NH | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5-437 | pic d5-437 (1/8x7/16 dowel pin ss) | 650 |
|
| MAINSOURC | NH | pic design 3154 | 62 |
| ||||
| MAINSOURC | NH | pic design ak-4 | 1747 |
| ||||
| OneMonroe | NC | Threaded Rod | Grade A36 | Zinc/Clear | 7/16-14 x 6 | 7/16-14 x 6 low carbon zinc plated continuous threaded rod | 4 |
|
| OneMonroe | NC | Threaded Rod | Grade A36 | Zinc/Clear | 7/16-14 x 6 | 7/16-14 x 6 low carbon zinc plated continuous threaded rod | 1 |
|
| OneMonroe | NC | Threaded Rod | Grade A36 | Zinc/Clear | 9/16-12 x 6 | 9/16-12 x 6 low carbon zinc plated continuous threaded rod | 5 |
|
| OneMonroe | NC | Threaded Rod | Grade A36 | Zinc/Clear | 3/8-24 x 12 | 3/8-24 x 12 low carbon zinc plated continuous threaded rod | 4 |
|
| OneMonroe | NC | Threaded Rod | Grade A36 | Zinc/Clear | 3/8-24 x 12 | 3/8-24 x 12 low carbon zinc plated continuous threaded rod | 34 |
|
| OneMonroe | NC | Threaded Rod | Grade A36 | Zinc/Clear | 7/16-14 x 12 | 7/16-14 x 12 low carbon zinc plated continuous threaded rod | 17 |
|
| OneMonroe | NC | Threaded Rod | Grade A36 | Zinc/Clear | 5/8-18 x 12 | 5/8-18 x 12 low carbon zinc plated continuous threaded rod | 4 |
|
| OneMonroe | NC | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 6 | #10-24 x 6 18-8 stainless steel continuous threaded rod | 5 |
|
| OneMonroe | NC | Threaded Rod | Grade A36 | Zinc/Clear | 7/16-14 x 6 | 7/16-14 x 6 low carbon zinc plated continuous threaded rod | 1 |
|
| MAINSOURC | NH | Round Spacer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 | spacer 3/16 rnd #2x3/16 ss dfars | 21 |
|
| MAINSOURC | NH | Round Spacer | Aluminum | Plain | 3/16 | spacer 3/16 rnd #2x3/8 alum | 150 |
|
| MAINSOURC | NH | Round Spacer | Aluminum | Plain | 3/16 | spacer 3/16 rnd #4x7/16 alum clr irr | 1020 |
|
| MAINSOURC | NH | Round Spacer | Aluminum | Plain | 1/4 | spacer 1/4 rnd #4x3/16 alum gld irr | 35 |
|
| MAINSOURC | NH | Round Spacer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 | spacer 1/4 od #4x1/2 ss | 400 |
|
| MAINSOURC | NH | Round Spacer | Aluminum | Plain | 1/4 | spacer 1/4 od #6x1/2 alum | 5 |
|
| MAINSOURC | NH | Round Spacer | Aluminum | Plain | 1/4 | spacer 1/4 rnd #6x5/8 alum gold irr | 116 |
|
| MAINSOURC | NH | Round Spacer | Nylon (Polyamide) | Plain | 5/16 | spacer 5/16 rnd #6x5/16 nylon | 4660 |
|
| MAINSOURC | NH | Round Spacer | Nylon (Polyamide) | Plain | 5/16 | spacer 5/16 rnd #8x1-1/16 nylon | 100 |
|
| MAINSOURC | NH | Round Female/Female Standoff | Aluminum | Plain | x 7/16 | f/f standoff 1/8 rnd 2-56x7/16 alum | 428 |
|
| MAINSOURC | NH | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | x 7/16 | f/f standoff 3/16 rnd 4-40x7/16 ss pass | 100 |
|
| MAINSOURC | NH | Round Female/Female Standoff | Aluminum | Plain | x 2 | f/f standoff 1/4 rnd 4-40x2 alum | 99 |
|
| MAINSOURC | NH | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 2 | f/f standoff 5/16 dia+-.001 10-32x2 ss | 25 |
|
| MAINSOURC | NH | Hex Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 1/2 | f/f standoff 3/16 hex 4-40x1/2 ss w/slot | 500 |
|
| MAINSOURC | NH | Hex Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 1 1/8 | f/f standoff 3/16 hex 4-40x1-1/8 ss | 25 |
|
| MAINSOURC | NH | Round Female/Female Standoff | Aluminum | Plain | 1/4 | f/f standoff 1/4 hes 4-40x1/4 alum | 26 |
|
| MAINSOURC | NH | Hex Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 1/2 | f/f standoff 1/4 hex 6-32x1/2 ss | 2 |
|
| MAINSOURC | NH | Hex Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 3/4 | f/f standoff 1/4 hex 4-40x3/4 ss | 48 |
|
| MAINSOURC | NH | Hex Female/Female Standoff | Aluminum | Plain | x 1 | f/f standoff 1/4 hex 6-32x1 alum | 319 |
|
| MAINSOURC | NH | Hex Female/Female Standoff | Aluminum | Plain | x 1 1/2 | f/f standoff 1/4 hex 4-40x1-1/2 alum | 700 |
|
| OneMonroe | NC | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 6 | 7/16-14 x 6' 18-8 stainless steel continuous threaded rod | 7 |
|
| MAINSOURC | NH | Hex Male/Female Standoff | Aluminum | Plain | x 1/4 | m/f standoff 1/4 hex 6-32x1/4 alum | 500 |
|
| MAINSOURC | NH | Hex Male/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 7/16 | m/f standoff 1/4 hex 6-32x7/16 ss | 974 |
|
| MAINSOURC | NH | Hex Male/Female Standoff | Steel | Plain | x 1/2 | m/f standoff 1/4 hex 6-32x1/2 | 57 |
|
| MAINSOURC | NH | Hex Male/Female Standoff | Nylon (Polyamide) | Plain | x 5/8 | m/f standoff 1/4 hex 6-32x5/8 nylon | 667 |
|
| MAINSOURC | NH | Hex Male/Female Standoff | Brass | Plain | x 3/4 | m/f standoff 1/4 hex 6-32x3/4 brass | 200 |
|
| MAINSOURC | NH | Hex Male/Female Standoff | Nylon (Polyamide) | Plain | x 1 | m/f standoff 1/4 hex 6-32x1 nylon | 1200 |
|
| MAINSOURC | NH | Hex Male/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 1 | m/f standoff 1/4 hex 6-32x1 ss | 2 |
|
| MAINSOURC | NH | Hex Male/Female Standoff | Steel | Zinc/Clear | x 1 1/2 | m/f standoff 1/4 hex 8-32x1-1/2 stl zp | 898 |
|
| MAINSOURC | NH | Hex Jack Screw | Brass | Nickel Plated | raf 4750-2 (jack screw 4-40x1/4 st z&y kit) | 333 |
| |
| MAINSOURC | NH | Hex Female/Female Standoff | Aluminum | Plain | x 8 | f/f standoff 4.5 hex m2.5x8 alum | 500 |
|
| MAINSOURC | NH | Electrical Wires & Cables | raychem 44a0111-12-8 (12awg wire gray) | 208 |
| |||
| MAINSOURC | NH | richco srs4-2-01 (snap-in spacer #4x.125) | 600 |
| ||||
| MAINSOURC | NH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | sdp s3106y-c038 (eccentric ss) | 1000 |
| |
| MAINSOURC | NH | Flat Washer | Nylon (Polyamide) | Plain | seastrom 5610-18-31 nylon | 65 |
| |
| MAINSOURC | NH | stafast r14205h3-zn zinc | 111 |
| ||||
| MAINSOURC | NH | Conduit Lock Nuts | Steel | Plain | t&b 140 (3/8 conduit lock nut steel) | 275 |
| |
| MAINSOURC | NH | Sealing Washer, Sealing Ring | 316, 317, A4 Stainless | Plain | 3/8 | t&b 5261 (3/8 sealing 316 & santoprene) | 50 |
|
| MAINSOURC | NH | External Type SH Retaining Ring | Steel | Plain | thomas & betts rbd18377 (insl push-on conn) | 100 |
| |
| MAINSOURC | NH | thomas & betts tc105 | 765 |
| ||||
| MAINSOURC | NH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Brass | Plain | 256 x 157 | tri-star 256x157s (brass insert) | 2890 |
|
| OneMonroe | NC | Threaded Rod | 316, 317, A4 Stainless | Plain | 5/8-11 x 6 | 5/8-11 x 6 316 stainless steel continuous threaded rod | 1 |
|
| MAINSOURC | NH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Brass | Plain | yardley 256b4-5br (2-56x.156 insert brass) | 504 |
| |
| MAINSOURC | NH | Sockets | win berg pz-19-3 mod drive to 5/32 socket | 200 |
| |||
| OneMonroe | NC | Threaded Rod | Grade B7 | Plain | 1 1/4-8 x 6 | 1-1/4-8 x 6 plain finish b7 continuous threaded rod | 2 |
|
| Jay-Cee | MI | O-Rings & Quad Ring Seals (X-Rings) | p918 o ring | 1 |
| |||
| TownCountry | AR | PC Board Supports & Spacers | camfil apc gs20 support hardware kit | 1 |
| |||
| MAINSOURC | NH | pem fhs m3-10 | 40 |
| ||||
| MAINSOURC | NH | Socket Head Cap Screw | Steel | Plain | #6-32 x 1 3/4 | 6-32x1-3/4 soc cap screw bss tin | 50 |
|
| MAINSOURC | NH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/4 | 8-32x3/4 soc cap screw ss tin | 150 |
|
| MAINSOURC | NH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/8 | 8-32x3/8 soc cap screw ss tin | 150 |
|
| MAINSOURC | NH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1/2 | 8-32x1/2 soc cap screw ss tin | 150 |
|
| MAINSOURC | NH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/8 | 8-32x5/8 soc cap screw ss tin | 150 |
|
| MAINSOURC | NH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 7/8 | 8-32x7/8 soc cap screw ss tin | 150 |
|
| MAINSOURC | NH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1 1/8 | 8-32x1-1/8 soc cap screw ss tin | 150 |
|
| MAINSOURC | NH | thomas & betts rb148 | 155 |
| ||||
| MAINSOURC | NH | External Type SH Retaining Ring | Steel | Plain | waldes/truarc 5100-43szd | 1572 |
| |
| MAINSOURC | NH | External Type E Retaining Ring (E-Clip) | Grade 2 | Plain | waldes/truarc 5133-12h | 832 |
| |
| MAINSOURC | NH | External Type E Retaining Ring (E-Clip) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | waldes/truarc 5133-25h | 25 |
| |
| MAINSOURC | NH | External Type E Retaining Ring (E-Clip) | Steel | Plain | waldes/truarc 5144-21-s-zd | 430 |
| |
| MAINSOURC | NH | External Type SH Retaining Ring | Steel | Plain | waldes/truarc 5555-25 phosphate | 1083 |
| |
| MAINSOURC | NH | Internal Type HO Retaining Ring | Steel | Plain | waldes/truarc n5000-112h | 50 |
| |
| MAINSOURC | NH | Internal Type HO Retaining Ring | Steel | Zinc/Yellow | waldes/truarc n5000-143 zd | 69 |
| |
| MAINSOURC | NH | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Plain | waldes/truarc 5005-44h | 130 |
| |
| MAINSOURC | NH | Self-Clinching Nut | Steel | Zinc/Clear | M8-1.25 | pem s-m8-1 | 40 |
|
| TownCountry | AR | Threaded Rod | Steel | Plain | #10-32 x 3 | #10-32x3 threaded rod plain | 82 |
|
| TownCountry | AR | Threaded Rod | Steel | Zinc/Clear | 1/4-20 x 10 | 1/4-20x10 threaded rod zinc | 10 |
|
| TownCountry | AR | Threaded Rod | Steel | Zinc/Clear | 1/4-20 x 12 | 1/4-20x12 threaded rod zinc | 35 |
|
| TownCountry | AR | Threaded Rod | Steel | Zinc/Clear | 1/4-20 x 3 | 1/4-20x3 threaded rod zinc | 16 |
|
| TownCountry | AR | Threaded Rod | Steel | Galvanized | 3/8-16 x 3 | 3/8-16x3 threaded rod hot dip galvanized | 23 |
|
| TownCountry | AR | Threaded Rod | Steel | Zinc/Clear | 3/8-16 x 3 | 3/8-16x3 threaded rod zinc | 97 |
|
| TownCountry | AR | Threaded Rod | Steel | Zinc/Clear | 5/8-11 x 3 | 5/8-11x3 threaded rod zinc | 7 |
|
| TownCountry | AR | Threaded Rod | Steel | Zinc/Clear | 5/8-11 x 7 | 5/8-11x7 threaded rod zinc | 1184 |
|
| TownCountry | AR | Threaded Rod | Steel | Zinc/Clear | 3/4-10 x 3 | 3/4-10x3 threaded rod zinc | 42 |
|
| TownCountry | AR | Threaded Rod (Acme Thread) | Steel | Plain | 7/8-6 x 6 | 7/8-6x6 threaded rod acme plain | 1 |
|
| TownCountry | AR | Threaded Rod | Grade B7 | Zinc/Yellow | 1/4-20 x 3 | 1/4-20x3 threaded rod b7 yellow zinc | 103 |
|
| TownCountry | AR | Threaded Rod | Grade B7 | Zinc/Yellow | 5/16-18 x 3 | 5/16-18x3 threaded rod b7 yellow zinc | 60 |
|
| TownCountry | AR | Threaded Rod | Grade B7 | Zinc/Yellow | 3/8-16 x 3 | 3/8-16x3 threaded rod b7 yellow zinc | 92 |
|
| SII | IN | Cushioned Pipe & Tube Loop Clamp | Rubber, Buna-N, Neoprene etc. | Plain | 3/8 | 3/8 epdm col clamp) | 400 |
|
| SII | IN | Grease Fittings | lps1 11oz. greaseless lubricant) | 24 |
| |||
| SII | IN | Blind Rivet | Aluminum | Plain | 3/4 | 3/4 quick grip) | 10 |
|
| SII | IN | Service & Repair Kits | 25 | 3m corp. pps lid & liner kit 16024 large (28 fl oz) 200 micron filter 25 lids & liners per kit | 3 |
| ||
| SII | IN | Wood Screw | Steel | Phosphate | #10 x 5/8 | #10x5/8 quadrex round washer deep thread black phosphated screw c1022 hardened 11 000 per box b18.6.1 | 16000 |
|
| SII | IN | Wood Screw | Steel | Zinc/Clear | #10 x 1 3/4 | #10x1 3/4 phillips flat head zinc plated wood screw) b18.6.1 | 300 |
|
| SII | IN | Flat Head Socket Cap Screw | Class 12.9 | Plain | M6-1.00 x 10 | M6-1.00x10 (ft) flat socket caps 12.9 coarse alloy thermal black oxide din 7991 | 2000 |
|
| SII | IN | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | M2 x 1/4 | 3m corp. roloc(tm) disc pad ts and tsm 14211 medium 2 in 1/4-20 internal | 10 |
| ||
| SII | IN | Pliers | 99 | 99004-6 channellock diagonal pliers replaces 436-bulk | 4 |
| ||
| SII | IN | Painter's Tape (Masking Tape) | 3m corp. general use masking tape 201+ tan 48 mm x 55 m 4.4 mil 24 per case bulk | 36 |
| |||
| SII | IN | Button Head Socket Cap Screw | Class 12.9 | Plain | M10-1.50 x 20 | M10-1.50x20 (ft) button socket cap screw coarse 12.9 thermal black oxide iso 7380 | 750 |
|
| SII | IN | Machine Screw | Steel | Plain | 5/16 | 5/16 machine screw michigan drill-110289) b18.6.3 | 12 |
|
| SII | IN | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M8-1.25 | M8-1.25 class 10 zinc plated top lock nut) din 980 | 1800 |
|
| SII | IN | Machine Taps | M8-1.25 x 4 | M8-1.25 4 flute bottom tap usa) | 6 |
| ||
| SII | IN | Machine Taps | 7/16-20 | 7/16-20 bottom tap usa) | 6 |
| ||
| SII | IN | Metal Drill Bits | 29/64 | 29/64 type 115 hss 118 general purpose drill bit) | 6 |
| ||
| SII | IN | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 1.500 | 1/4x1.500 18-8 s/s steel fender ) | 100 |
|
| SII | IN | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 3m(tm) hookit(tm) film disc 375l 5 inxnh p120 50 per inner 250 per case | 200 |
| |||
| SII | IN | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 3m(tm) hookit(tm) film disc 375l 5xnh p150 50 per inner 250 per case | 150 |
| |||
| SII | IN | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 3m(tm) hookit(tm) film disc 375l 5 inxnh p180 50 per inner 250 per case | 150 |
| |||
| MAINSOURC | NH | win berg su-2 | 766 |
| ||||
| SII | IN | Valves & Accessories | Brass | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 | 1 forged brass ball valve-rub s92ff-teflon adj pkg gland) | 5 |
|
| SII | IN | Socket Head Cap Screw | Class 12.9 | Plain | M5-0.80 x 18 | M5-0.80x18 (ft) socket cap screw 12.9 coarse iso 4762 / thermal black oxide din 912 | 400 |
|
| MAINSOURC | NH | Swage Standoff | Aluminum | Plain | bind swage standoff 3/16 hex 4-40x3/16 3/32 pnl alum | 50 |
| |
| TSF | TX | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 | hex hd bolt ss 10-32x1 | 300 |
|
| TSF | TX | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 | serrated flange nut ss 1/4-20 | 5000 |
|
| TSF | TX | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | socket cap screw ss-a4 m2.5-.45x14mm | 2400 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
