FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Endries | WI | Lock Nut, Flange, w/o serrations | Grade G | Cadmium | 3/8-16 | 3/8-16 grade g flange top locknut cadmium & wax | 30600 |
|
| Endries | WI | CD Weld Stud | Plain | #10-24 x 1/2 | 10-24x1/2 cd weld stud | 1000 |
| |
| Endries | WI | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | M5 | m5 keps locknut hex chromium free 96 hr salt spray zinc | 6000 |
|
| Endries | WI | Carriage Bolt | Grade 5 | Zinc/Clear | 3/8-16 x 4 1/2 | 3/8-16x4-1/2 grade 5 full thread carriage bolt tri clear zinc 96 white rust 4 hour post plate bake | 20 |
|
| Endries | WI | Fully Threaded Stud (All Thread) | 316, 317, A4 Stainless | Plain | 1/4-20 x 12 1/2 | 1/4-20x12-1/2 316 stainless steel full thread stud sheared ends | 153 |
|
| Endries | WI | Pipe Elbow | Brass | 1/8 | 310-2 (oe) 1/8 brass 90 degree street elbow mip x fip | 100 |
| |
| Endries | WI | Machine Key (Square & Rectangular) | 316, 317, A4 Stainless | Plain | M12 x 8 x 70 | 12x8x70 a4 stainless rectangular key round both ends din 6885a | 80 |
|
| Endries | WI | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | 5/16-18 x 5/8 | 5/16-18x5/8 grade 5 hex head cap screw yellow zinc | 46 |
|
| Endries | WI | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/8-16 x 4 3/4 | 3/8-16x4-3/4 grade 5 hex head cap screw trivalent clear zinc | 805 |
|
| Endries | WI | Hex Head Cap Screw | Grade 5 | Plain | 1/2-13 x 12 | 1/2-13x12 grade 5 hex head cap screw plain | 314 |
|
| Endries | WI | Tooth Lock Washer (Int. & Ext.) | 316, 317, A4 Stainless | Plain | #10 | #10 410 stainless steel internal tooth lock washer | 21972 |
|
| Endries | WI | Set Screw (Square Head) | Plain | 1/4-20 x 1 3/4 | 1/4-20x1-3/4 square headed set screw cup point plain | 75 |
| |
| Endries | WI | Tooth Lock Washer (Int. & Ext.) | Silicon Bronze | Plain | #8 | #8 silicon bronze external tooth lock washer | 2323 |
|
| Endries | WI | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 1/2-13 x 1 1/4 | 1/2-13x1-1/4 316 stainless steel hex head cap screw | 180 |
|
| Endries | WI | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8 x 1/2 | 1/8x1/2 18-8 stainless steel dowel pin | 100 |
|
| Endries | WI | Flat Washer | Brass | Plain | .281 x .625 x .040 | #16(s) brass flat washer (.281x.625x.040) | 1290 |
|
| Endries | WI | Countersunk Finishing Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 | 1/4 18-8 stainless steel countersink finish washer | 100 |
|
| Endries | WI | Shoulder Bolt (Stripper Bolt) | ASTM A574 | Plain | 1/2 x 3 3/4 (3/8-16) | 1/2x3-3/4 alloy socket shoulder screw 3/8-16 thread plain | 25 |
|
| Endries | WI | Flat Washer | Brass | Plain | .200 x .50 x .040 | #10l brass flat washer (.200x.50x.040) | 480 |
|
| Endries | WI | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 5/16-18 x 1 1/4 | 5/16-18x1-1/4 316 stainless steel hex head cap screw | 300 |
|
| GUIDON | NJ | Sems Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 | phillips flat head with countersunk external tooth lockwasher | 11,000 |
|
| GUIDON | NJ | Self-Clinching Stud | Steel | Zinc/Clear | #10-24 x 3/4 | PEM (Penn Eng. & Mfg.) FH024-12 EQUIVALENT | 1,056 |
|
| GUIDON | NJ | Self-Clinching Stud | Steel | Zinc/Clear | 1/4-20 x 3/4 | PEM (Penn Eng. & Mfg.) FH0420-12 EQUIVALENT | 900 |
|
| GUIDON | NJ | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 | PEM (Penn Eng. & Mfg.) FHS0420-8 | 200 |
|
| GUIDON | NJ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 3/4 | Heli-Coil 3585-12CN-0750 | 35 |
|
| GUIDON | NJ | Snap Bushings, Strain Relief Bushings | Nylon (Polyamide) | Plain | 3/4 | Micro Plastics, Inc. 22AF0750 BLACK | 500 |
|
| GUIDON | NJ | Electronic Components | Nylon (Polyamide) | Plain | 1 1/2 | Heyco 2213SP OPEN/CLOSED UNIVERSAL BUSHING BLACK | 1,500 |
|
| GUIDON | NJ | Electronic Components | Nylon (Polyamide) | Plain | 2 | Heyco 2406 | 8,000 |
|
| GUIDON | NJ | Electronic Components | Nylon (Polyamide) | Plain | 1 | Heyco 2715XX-BEIGE | 5,872 |
|
| GUIDON | NJ | Electronic Components | Plain | 3/4 | Heyco G5223 | 15,000 |
| |
| GUIDON | NJ | Electrical Lugs & Terminals | Copper | Plain | #22-16 | Hillsdale Terminal 20050 RED VINYL INSULATED SPADE CONNECTOR #6 STUD SIZE | 2,500 |
|
| GUIDON | NJ | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Brass | Plain | #10-24 x .327 | knurled insert | 1,760 |
|
| GUIDON | NJ | External Type E Retaining Ring (E-Clip) | Steel | Phosphate | 1/8 | Rotor Clip E-12STPA | 20,000 |
|
| GUIDON | NJ | External Type E Retaining Ring (E-Clip) | Steel | Phosphate | 3/4 | IRR (Industrial Retaining Ring) 1000-X75STPA | 50 |
|
| GUIDON | NJ | External Type E Retaining Ring (E-Clip) | Steel | Phosphate | 3/8 | Rotor Clip SHF-37STPA | 1,000 |
|
| GUIDON | NJ | External Type E Retaining Ring (E-Clip) | Steel | Phosphate | 3/8 | IRR (Industrial Retaining Ring) 7100-037STPA | 1,000 |
|
| GUIDON | NJ | Sems Machine Screw | Steel | Zinc/Clear | M4 x 6 | phillips pan double sems with 8mm od flat washer and split lockwasher per jis b1188 b | 7,000 |
|
| GUIDON | NJ | Sems Machine Screw | Steel | Zinc/Clear | M5 x 16 | phillips pan double sems with 10mm od flat washer and split lockwasher per jis b1188 b | 1,000 |
|
| GUIDON | NJ | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | 1/2-13 x 1 | shoulder pattern forged eyebolt | 100 |
|
| GUIDON | NJ | Round Spacer | Brass | Zinc/Clear | #8 x 1/4 x 3/8 | Keystone Electronics 1481 | 585 |
|
| Endries | WI | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-20 x 1 | 1/4-20x1 grade 5 hex head cap screw tri clear zinc 96 white rust | 3750 |
|
| Endries | WI | Shim Washer (Round, Slotted, Square etc.) | Plain | M80 x 90 x 0.1 | 80x90x0.1mm shim washer plain din 988 | 4612 |
| |
| Endries | WI | Flared Fittings | Brass | 1/4 | pg6160c 1/4 tube brass compression nut & nylon sleeve | 50 |
| |
| Endries | WI | Hex Head Cap Screw | Grade 5 | Plain | 1-8 x 9 | 1-8x9 grade 5 hex head cap screw plain | 1786 |
|
| Endries | WI | Hex Head Cap Screw | Grade 8 | Plain | 3/8-16 x 3/4 | 3/8-16x3/4 grade 8 hex head cap screw plain | 300 |
|
| Endries | WI | Socket Head Cap Screw | null | Zinc/Clear | 1/4-20 x 5/8 | 1/4-20x5/8 socket head cap screw zinc | 2000 |
|
| Endries | WI | Flat Head Socket Cap Screw | Steel | Plain | 3/8-16 x 3 | 3/8-16x3 flat socket head cap screw plain | 50 |
|
| Endries | WI | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/16 x 2 | 3/16x2 420 stainless steel slotted spring pin | 600 |
|
| FMP | MA | Wood Screw | Aluminum | Plain | 8 x 3/4 | slotted flat | 1200 |
|
| Endries | WI | Weld Nut | Plain | 1/4-20 | 1/4-20 weld nut stafast sl14205 | 750 |
| |
| Endries | WI | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 2 | 3/4-10x2 grade 5 hex head cap screw tri clear zinc 96 white rust | 200 |
|
| Endries | WI | Pipe Nipple | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3/4 x 8 | 3/4x8 304 stainless steel schedule 40 thread pipe nipple | 10 |
| |
| Endries | WI | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #10-32 x 3/4 | 10-32x3/4 6-lobe pan head tri-lobe thread rolling screw trivalent clear zinc & wax | 16100 |
|
| Endries | WI | SAE Flat Washer | Steel | Zinc/Clear | .401 x .805 x .051 | 3/8 sae flat washer zinc (.401x.805x.051) | 3000 |
|
| Endries | WI | Service & Repair Kits | 90 | 9013994 nl balancer kit r1533/27 | 18 |
| ||
| Endries | WI | Flat Washer | Steel | Zinc/Yellow | .343 x .688 x .078 | .343x.688x.078 hardened flat washer yellow zinc w/cmtr | 1750 |
|
| Endries | WI | Two-Piece Wedge Lock Washer (Heico-Lock, Disc-Lock, etc.) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | fail | 1-1/8/m30 steel nordlock delta protekt zinc flake (pairs) | 100 |
|
| Endries | WI | Carriage Bolt | Grade 5 | Plain | 1/2-13 x 4 | 1/2-13x4 grade 5 carriage bolt plain | 100 |
|
| Endries | WI | Tooth Lock Washer (Int. & Ext.) | 316, 317, A4 Stainless | Plain | #12 | #12 410 stainless steel external tooth lock washer | 250 |
|
| Endries | WI | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 2 1/2 | 5/16-18x2-1/2 18-8 stainless steel hex head tap bolt | 125 |
|
| Endries | WI | Countersunk Finishing Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 | #10 18-8 stainless steel countersink trim washer | 500 |
|
| Endries | WI | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1 3/4 | 5/16-18x1-3/4 18-8 stainless steel flat socket head cap screw | 300 |
|
| Endries | WI | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 2 1/2 | 7/16-14x2-1/2 grade 5 hex head cap screw tri clear zinc 96 white rust | 50 |
|
| Endries | WI | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8-32 x 1 | 8-32x1 phillips pan tri-lobe thread rolling screw hex chromium free 96 hr salt spray zinc and wax wax | 5000 |
|
| Endries | WI | Cushioned Pipe & Tube Loop Clamp | 3/8 | tw38 (oe) 3/8 one hole clamp | 200 |
| ||
| Endries | WI | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 5/8-11 x 5 3/4 | 5/8-11x5-3/4 grade 8 flange bolt phos & oil | 3 |
|
| Endries | WI | Ball Bearings, Balls, Bearing Mounts | Plain | 51573 1/4 | 51573 1/4 4 flute ball carbide long length endmill | 5 |
| |
| Endries | WI | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 6 | 1/4-20x6 phillips flat head machine screw zinc | 200 |
|
| Endries | WI | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | 1/4-20 x 7/8 | 1/4-20x7/8 grade 5 hex head cap screw tri ylw 96hr wh f1941 .0002 | 300 |
|
| Catalina | AZ | Solid Rivet | Steel | Zinc/Black | M9 x 14.5 | 9mm dia x 14.5 wafer head rivet () () | 56,679 |
|
| Catalina | AZ | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 7.9 x 1 Org | 7.9 x 1 epdm 70 o-ring | 400,000 |
|
| Aspen | PA | Double End Stud | Class 5.8 | Plain | M30-3.50 x 200 | m30-3.5 x 200mm, din 939, metric, studs, double-ended, screw-in end 1.25 x diameter, class 5.8 steel | 5 |
|
| Aspen | PA | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 10 | m3 x 10mm din 7 type a, metric, solid dowel pins, a1 stainless steel | 5600 |
|
| NutsBolts | NE | Machine Taps | 3/8-24 | 3/8-24 bottoming tap | 3 |
| ||
| Catalina | AZ | Set Screw (Socket Head) | Class 10.9 | Zinc/Clear | M7/16-20 UNF-2A 35.3 T50 | screw 7/16-20 unf-2a 35.3mm t50 class 10.9 zinc plating () () | 100000 |
|
| Catalina | AZ | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 568-111 | 568-111 epdm 80 o-ring | 1,200,000 |
|
| Catalina | AZ | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 18.77 x 1.78 O rg | 18.77 x 1.78 silicone 70 red o-ring | 1,300,000 |
|
| Catalina | AZ | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 568-014 | 568-014 c70 neoprene | 600,000 |
|
| Catalina | AZ | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 568-013 O-rg | 568-013 o-ring silicone 70 black | 25,000 |
|
| Catalina | AZ | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 12.75 x 2.4 O rg | 12.75 x 2.4 epdm 80 o-ring | 500,000 |
|
| Mansco | MI | Shoulder Bolt (Stripper Bolt) | 316, 317, A4 Stainless | Plain | 1/4 x (#10-24) | 1/4 x 1-1/2 socket shoulder bolt 316 s.s. | 475 |
|
| MFS | KS | Self-Clinching Stud | Steel | Zinc/Clear | Captive Fastener CH120-4 | 7330 |
| |
| MFS | KS | Self-Clinching Standoff | Steel | Zinc/Clear | 4 40 x 3/8 | Captive Fastener CFBSO440-12 | 3780 |
|
| MFS | KS | Self-Clinching Stud | Steel | Zinc/Clear | #6-32 x 1/2 | Captive Fastener CFBSO632-16 | 1066 |
|
| MFS | KS | Self-Clinching Stud | Steel | Zinc/Clear | #6-32 x 3/8 | Captive Fastener CFBSO632-12 | 1690 |
|
| MFS | KS | Self-Clinching Stud | Steel | Zinc/Clear | #6-32 x 3/4 | Captive Fastener CFBSO632-24 | 3000 |
|
| MFS | KS | Self-Clinching Stud | Steel | Zinc/Clear | M3.5 | Captive Fastener CFSO3.5M3-8 | 4800 |
|
| MFS | KS | Self-Clinching Stud | Steel | Zinc/Clear | M3.5 | Captive Fastener CFSO3.5M3-10 | 748 |
|
| MFS | KS | Steel | Zinc/Clear | Captive Fastener CFSSC156-008 | 12500 |
| ||
| MFS | KS | Steel | Zinc/Clear | Captive Fastener CFSSC156-12 | 2667 |
| ||
| MFS | KS | Steel | Zinc/Clear | Captive Fastener CFSSC156-14 | 172 |
| ||
| MFS | KS | Steel | Zinc/Clear | Captive Fastener CFSSC156-20 | 1529 |
| ||
| MFS | KS | Self-Clinching Stud | Steel | Zinc/Clear | Captive Fastener CH141-4 | 436 |
| |
| MFS | KS | Self-Clinching Stud | Steel | Zinc/Clear | Captive Fastener CH094-4 | 11600 |
| |
| SunPack | FL | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1/2 | 304 ss fin h/b | 235 |
|
| SunPack | FL | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3 3/4 | 304 ss fin h/b | 39 |
|
| SunPack | FL | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 6 1/2 | 304 ss fin h/b | 18 |
|
| SunPack | FL | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1 3/8 | 304 ss fin h/b | 125 |
|
| SunPack | FL | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 5 1/2 | 3/8-16x5-1/2 304 ss fin h/b | 1 |
|
| SunPack | FL | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 7 | 304 ss fin h/b | 3 |
|
| SunPack | FL | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3 1/2 | 304 ss fin h/b | 227 |
|
| SunPack | FL | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 6 | 304 ss fin h/b f/t | 1 |
|
| SunPack | FL | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 3 | 304 ss fin h/b f/t | 2 |
|
| SunPack | FL | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 3 | 304 ss fin h/b f/t | 20 |
|
| Spencer | OH | Rotor Clip Internal Self-Locking Push-On Housing for 1-1/4 Shaft | 1200 |
| ||||
| Spencer | OH | Weld Nut | Steel | Zinc/Clear | M12 | Buckeye / Ohio Nut & Bolt M12 Hex Weld Nut, 3-Proj, Short Pilot, Trivalent Zinc | 4100 |
|
| Spencer | OH | AVK / Avibank #6-32 Open End A-K Series Insert, Z/Y Dichromate | 8164 |
| ||||
| Spencer | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 4 1/2 | 18-8 SST | 1700 |
|
| Spencer | OH | Lock Bolt with Collar (HuckBolt etc.) | na | Huck (HuckBolt, Hucktainer etc.) Bobtail Nose Assy - 08 | 2 |
| ||
| Spencer | OH | Lock Bolt with Collar (HuckBolt etc.) | NA | Huck (HuckBolt, Hucktainer etc.) Anvil, MBTC-R16,HS2 Noses | 3 |
| ||
| Spencer | OH | Lock Bolt with Collar (HuckBolt etc.) | NA | Huck (HuckBolt, Hucktainer etc.) Spin 5/8 x 1.5 Grip | 1120 |
| ||
| BCSB | CA | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 1/2-13 x 9 | 1/2-13x 9 hex head fully threaded a307 gd a zinc cr+3 | 4000 |
|
| JFI | CA | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 2-56 x 1/2 | captive fastener corp nps51957-7l phil pan stainless w/ patch domestic w/ certs | 4000 |
|
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Plain | M12-1.75 x 55mm | nylon-patch | 100 |
|
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Plain | M12-1.75 x 50mm | 3120 |
| |
| FACCA | Ont | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75 x 50mm | nylon-patch | 400 |
|
| FACCA | Ont | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M12-1.75 x 50mm | patch | 10000 |
|
| FACCA | Ont | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75 x 48mm | 22mm washer, dog point | 600 |
|
| FACCA | Ont | Hex Head Cap Screw | Class 10.9 | Plain | M14-1.50 x 45mm | 1997 |
| |
| FACCA | Ont | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75 x 45mm | 300 |
| |
| FACCA | Ont | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75 x 45mm | dog point, 30mm washer | 10000 |
|
| FACCA | Ont | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75 x 45mm | full thread | 200 |
|
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Plain | M12-1.75 x 45mm | dog point | 4000 |
|
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Phosphate | M12-1.75 x 45mm | hex 15mm af, flange 25mm af | 300 |
|
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M12-1.75 x 45mm | dog point 10mm, 30mm loose washer, nylon-patch | 4000 |
|
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Phosphate | M12-1.75 x 45mm | full thread, hex 14mm af, washer 23mm af | 250 |
|
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Cadmium | M12-1.75 x 44mm | patch | 200 |
|
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Cadmium | M12-1.75 x 40mm | 800 |
| |
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Black Oxide | M12-1.75 x 40mm | dog point | 150 |
|
| FACCA | Ont | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75 x 40mm | dog point, 25mm loose washer | 800 |
|
| FACCA | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Plain | M12-1.75 x 38mm | dog point | 3900 |
|
| FACCA | Ont | Hex Head Cap Screw | Grade 5 | Cadmium/Yellow | #10-32 x 1 | tri-wing recess on top of hex head |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
