FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Kanebridge | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #10-16 x 1/2 | #10-16x1/2 sqr flat full thread self drill zinc bk 1000hr self-drilling screws | 100000 |
|
| GLF | OH | Panel & Trim Clips (J-Clips, U-Clips) | Nylon (Polyamide) | Plain | engine compartment & front end retainer clip-black nylon-25/pk 20360 | 50 |
| |
| Kanebridge | IL | Bonded EPDM Sealing Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 1 | 1/4x1 epdm bonded washers stainless steel washers | 20000 |
|
| CIF | IL | Weld Nut | Plain | M8-1.25 | m8-1.25 weld nut single tab style 1m c1010 plain | 4686 |
| |
| Brikksen | Blind Rivet | Plain | 1/4 (1/4) | 1/4 x 1/4 maximum grip dome head open | 40000 |
| ||
| Brikksen | T-Nut (Tee Nut) | Plain | #10-24 x 9/32 | 10-24 x 9/32 barrel length tee nut 3 | 25000 |
| ||
| Brikksen | Hex Head Cap Screw | Steel | Plain | 3/4-10 x 7 | 3/4-10 x 7 hex head cap screw asme | inquire |
| |
| SWACO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Zinc/Clear | #8-32 | nas1329z08-120 | 65 |
| |
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 60 | 2tnf-4n-0375 kato nitronic 60 tangless insert | 945 |
|
| SWACO | OH | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 3/8 x 2 1/4 | 3/8x2-1/4 standard slotted spring pin steel black oxide asme b18.8.2 | 162 |
|
| SWACO | OH | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | nut self locking reduced hexagon reduced height ring base ms21042l5 | 275 |
| |
| SWACO | OH | Split Lock Washer | Steel | Plain | M10 | m10 split l/w stl black-finish | 2300 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 5 | Plain | 5/16-24 x 1 1/4 | 5/16-24x1-1/4 hhcs gr5 pln usa | 170 |
|
| SWACO | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M14-2.00 x 100 | m14-2.00x100 hhcs cl8.8 zpcr3 | 45 |
|
| SWACO | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M16-2.00 x 110 | m16-2.00x110 hhcs cl8.8 zpcr3 | 72 |
|
| AIH | AZ | Hex Head Cap Screw | ASTM A574 | Zinc/Clear | 1/4 x 5/8 | 1/4 x 5/8 hex cap screw alloy steel zinc plate | 1 |
|
| NBS | CA | Dowel Pin | Steel | Plain | 1/4 x 1 | 1/4x1 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 1/4 x 3 3/4 | 1/4x3-3/4 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Plain | M16-2.00 x 55 | M16-2.0x55 cl.10.9 frame bolt-non-indented-non-serrated-furnace black iso 4162 | 10000 |
|
| NBS | CA | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 3 3/4 | 1/4x3-3/4 18-8 s/s steel dowel pin-asme b18.8.2-bright finish (taiwan) | 25000 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | 1.18 | huck lockbolt pin (mbt-dt12-25np) ( .787 / 1.18 | 296 |
| |
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Galvanized | huck lockbolt pin mgpt-e8-20ac ( .312 / .1.250 | 1773 |
| ||
| Field Fas | IL | Socket Head Cap Screw | Class 12.9 | Plain | M14-2.00 x 60 | m14-2 x 60 soc cap 12.9 pln/holokrome | 200 |
|
| OneMonroe | MN | Self-Clinching Stud | Steel | Zinc/Clear | #8-32 x 5/8 | 8-32 x 5/8 zinc plated self clinching stud | 788 |
|
| OneMonroe | MN | Double End Stud | Plain | 1-14 x 13 1/2 | 1-14 x 13-1/2in stud double end | 10 |
| |
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | 5/16-18 x 1 1/2 slottedround m/s plated | 7 |
|
| OneMonroe | MN | Eye Bolt | Steel | Galvanized | 1/4 x 2 | 1/4 x 2 regular nut eyebolt galvanized finish | 32 |
|
| OneMonroe | MN | Socket Head Cap Screw | Grade B7 | Plain | 5/8-11 x 1 | 5/8-11 x 1 shc a193 b7 | 36 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 3/8 x 6 | 3/8 x 6 shc | 1 |
|
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Green | #8-15 x 1 | 8-15x1 phillips pan hd type-a stl hard & .0003 zinc w/evergreen painted hds | 14000 |
|
| OneMonroe | MN | Machine Screw | Steel | Cadmium | #10-9 x 3/4 | 10-9x3/4 sq drive pan hd pb stl hard & .0003 cad & empigard | 6500 |
|
| OneMonroe | MN | Brackets & Supports | 1 | d ring 1 50 degree angle with a style bracket | 30 |
| ||
| OneMonroe | MN | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 5/16 | #10-32 x 5/16 18-8 stainless steel flat socket cap screw | 1500 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | #10-32 x 1 1/4 | 10-32x1-1/4 phillips pan hd ms stl & zinc | 50970 |
|
| OneMonroe | MN | Machine Screw | Zinc/Black | M4-0.70 x 6 | m4-.7 x 6 phillips truss m/s black zinc | 5000 |
| |
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Plain | #8 | ring versa-crimp #8 stud versakrimp | 300 |
| |
| OneMonroe | MN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #0 | #6 x 17/64 od x 0.032 flat washer stainless steel a2 (18-8) nas620 | 2000 |
|
| OneMonroe | MN | Resistance/Projection Weld Stud | Steel | Plain | 1/4-20 x 1/2 | 1/4-20 x 1/2 steel nibs under head projection spade weld screw | 850 |
|
| OneMonroe | MN | Electrical Wires & Cables | Class 4.8 | Passivated | make per print 9297028 rev a pass in accordance with qq-p-35 astm a380 (ams2700 method 1 type-2 rev f 5.4.1 of mil-std-171)-certs req d-lockheed approved processor-anoplate-final proc is mil-std-171 3.3.4 (is mil-dtl-13914 cl4 rev d)-proc is anoplate corp-salt spray test | 10 |
| |
| OneMonroe | MN | Self-Tapping Self-Drilling Screw (Tek etc.) | Plain | #8-18 x 1/2 | 8-18x 1/2 self drill ultra mar | 30000 |
| |
| OneMonroe | MN | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #14 x 1 | #14 x 1 unslotted hwh self-drilling screw steel zinc | 18580 |
|
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 5/16 | screw mach. 4-40x5/16 f82/phillips s/s | 645 |
|
| OneMonroe | MN | Straight Anchor Bolt | Steel | Plain | 5/8-11 x 6 | 5/8-11 x 6 anchor bolt (no nut) | 14 |
|
| Alma Bolt | MI | Button Head Socket Cap Screw | Steel | Zinc/Clear | 1/2-13 x 3 | 1/2-13 x 3 zinc plated f/t button head socket cap screw | 1219 |
|
| Alma Bolt | MI | Internal Wrenching Nut (Allenut) | Plain | 1/4-20 | 1/4-20 allenut | 70 |
| |
| Alma Bolt | MI | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | 1/4-20 x 3 1/2 | 1/4-20 x 3 1/2 grade 5 hhcs yellow-zinc | 1400 |
|
| Alma Bolt | MI | Hole Saws | Steel | 3/4 | 3/4 bi-metal varied ptch 55012 sterling hole saw | 22 |
| |
| Alma Bolt | MI | Machine Screw | Plain | 5/16-18 x 4 | 5/16-18 x 4 truss combo (phil-sl) m/s | 500 |
| |
| Brikksen | FL | Deck Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 | 8 x 1 square bugle type-17 deck screw ss/chrome- | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 | 10-24 x 1 indented hex ms ss | inquire |
|
| Brikksen | FL | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 65 | 3/8-16 x 65 double end rod 18-8ss full body diameter cut threads toe = 2 and 3-1/2 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 8 | slotted flat head machine screw a2 m4-.70 x 8 din 963 | inquire |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2 | split lock washer a2 (1.4310) m2 din 127b | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 35 | hex head cap screw partial thread a2 m8-1.25 x 35 din 931 | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 10 | socket set screw cup point a2 m10-1.5 x 10 din 916 | 4000 |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 50 | button socket head cap screw-25 per bag a2 m8-1.25 x 50 iso 7380 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3/8 | 1/4-20 x 3/8 hex hd c/s s s f593c | 4000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 3/4 | 1/4-28 x 3/4 phillips pan m/s ss | 4000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 1 1/2 | #14 x 1-1/2 phillips truss head sms type-a 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | 3000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 40 | phillips pan head machine screw-100 per bag a2 ph m3-.50 x 40 din 7985 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/8-24 x 2 1/2 | 3/8-24 x 2-1/2 hex head cs 316ss 401194 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 5/8 | 1/4-20 x 5/8 phillips truss head m/s 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 12 | hex head cap screw full thread a2 m6-1.0 x 12 din 933 | inquire |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 x 3/4 | 5/16-24 x 3/4 flat soc cs ss | 400 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 x 5/8 | 6 x 5/8 square dr. pan a ss/black m10 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 12 | hex head cap screw full thread a2 m4-.70 x 12 din 933 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/8 | 8-32 x 3/8 indented hex ms 18-8ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3/4 | 7/16-14 x 3/4 hex hd cs ss f593c | 1000 |
|
| Bossard | AZ | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | standoff blind stainless penn engineering | 73587 |
| |
| Bossard | AZ | nut steel zinc penn engineering | 20 |
| ||||
| Bossard | AZ | Tooth Lock Washer (Int. & Ext.) | Steel | Plain | M10 | m10 rip-lock toothed washer | 500 |
|
| Optimas | IL | Wing Nut | Steel | Zinc/Clear | M10-1.50 x 65 | m10x1.5 x 65mm oal square tube nut 1018 steel per drawing rohs (i) | 100 |
|
| Optimas | IL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1-8 x 1 | 1-8 x 1.000 asme b18.2.1 hex cap screw gr 5 zinc trivalent rohs compliant (i) | 13 |
|
| Optimas | IL | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #56 | sae #56 worm drive hose clamp w/steel screw ss 3.000 to 4.000 | 85 |
| |
| Optimas | IL | Signs & Labels | 3/8 | warning hazardous voltage label 1 23/64 w 3 3/8 l pbt yel/orn/blk acyl adh | 205 |
| ||
| American | WI | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.25 x 45 | m10-1.25x45 hex hd c/s ss (fine thread) din 961-a2a2 | 35 |
|
| American | WI | Masonry & Concrete Drill Bits | Steel | 1 x 27 | 1 x27 oal sds-max speed clean dust extraction drill bit (17-1/2 usable length) | 1 |
| |
| IndexFast | CA | Spring Steel Lock Nut (PalNut, etc.) | Steel | Zinc/Clear | spring steel lock nut (palnut etc.) steel zinc/clear 5/16-18 bf 516180 soh washer type-zip twist nut 5/16 steel/mechanical zinc | inquire |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Zinc/Clear | sheet metal speed nut tinnerman nut (f/j/u) steel zinc/clear 3/4-10 rf 341000 soh _x000d_regular type lock nut 3/4-10 steel/mechanical zinc | inquire |
| |
| AFT Faste | TX | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Phosphate | #6-20 x 1 1/4 | #6-20x1-1/4 #2 point bugle hea phil proferred self-drill self drilling screw gray phosphated | 5 |
|
| Coburn Myers Fastening Systems | PA | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | fully threaded stud (all thread) a194 grade b7 teflon coated | 6 |
| |
| Coburn Myers Fastening Systems | PA | Flat Washer | Steel | Plain | flat washer carbon steel plain | 51 |
| |
| Coburn Myers Fastening Systems | PA | Finished Hex Nut | Grade 8 | Zinc/Yellow | finished hex nut grade 8 zinc/yellow | 346 |
| |
| Coburn Myers Fastening Systems | PA | Heavy Hex Nut | Steel | Galvanized | heavy hex nut carbon steel galvanized | 429 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Zinc/Yellow | hex head cap screw class 8.8 zinc/yellow | 27 |
| |
| Surpless, | IL | Dowel Pin | Plain | 3/16 x 1 1/2 | 3/16 x 1-1/2 oversize dowell (100 pcs per box) | 1 |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | #8-32 x 1/2 | 8-32 x 1/2 phillips pan m/s 18-8 black xylan- | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 12 | socket set screw flat point a2 m3-.50 x 12 din 913 | inquire |
|
| Brikksen | FL | U-Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 2 | 5/16-18 x 2 btl x 3 lg with 1-1/4 thread round bend u-bolt 18-8ss rev 0 | 80 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | #8 x 1 | 8 x 1 1/2 phillips pan type-a ss black xylan- | inquire |
|
| Brikksen | FL | Machine Screw | Aluminum | Plain | #616 | #616 alum/st mandrel large flange-pop brand | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | M2.5-0.45 x 10 | phillips pan head machine screw-100 per bag a4 ph m2.5-.45 x 10 din 7985 | inquire |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | #5-44 x 3/8 | 5-44 x 3/8 socket cap full thread 316 stainless | 9 |
|
| FasSpcMfg | FL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 2.38 | 1/2-13 x 2.38 stud with dog pt and hex socket per dwg 303 stn 2a thread fit dog point .310 x 1.38 (tol on diam .300/.320) chamfer 3 places .030 x 45deg | 2 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 1/4-20 x 1 3/8 | 1/4-20 x 1-3/8 low head socket cap inconel 625 | 1 |
|
| NutsBolts | NE | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 5/8 | 1/4-20x5/8 ss carriage bolt | 300 |
|
| OneMonroe | MA | Hex Machine Bolt | Grade A | Zinc/Clear | 3/8-16 x 1/2 | 3/8-16 x 1/2 zinc finish astm a307a hex bolt | 1200 |
|
| OneMonroe | MA | Channel Nut | Steel | Plain | #8 | spring nut for #8screw | 410 |
|
| OneMonroe | MA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8-18 x 1/2 | #8-18 x 1/2 3c/3r type-b self tapping screw steel zinc plated | 20 |
|
| OneMonroe | MA | Flat Head Socket Cap Screw | Steel | Plain | M5-.8-0.80 x 20 | m5-.8 x 20m flat soc cap screw | 297 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 1 1/2 | 3/4-10 x 1-1/2 hex cap screw gr 5 z dom | 20 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 | phillips ovalal head ms 304 ss 1/4-20 x 2 | 799 |
|
| Raw Produ | NJ | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain | 5/8-11 x 2 | socket set screw 316 ss 5/8-11 x 2 | 6 |
|
| Raw Produ | NJ | Finished Hex Nut | Grade 8 | Plain | 1-8 | hex finish nuts grade 8 1-8 | 198 |
|
| Raw Produ | NJ | Timber Bolt (Economy Bolt) | Steel | Galvanized | 5/8-11 x 22 | timber bolts hdg 5/8-11 x 22 | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2-13 x 2 | hex cap screws grade 5 zinc 1/2-13 x 2 pt | 1454 |
|
| Raw Produ | NJ | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 | neoprene roofing washers 304 ss #12 | 6354 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 5/16-18 x 2 1/2 | hex cap screws 316 ss 5/16-18 x 2-1/2 pt | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1-8 x 7 | hex cap screws grade 5 zinc 1-8 x 7 pt | 35 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 5/8 | button head socket cap screws 304 ss 5/16-18 x 5/8 | 992 |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 2 | flat head socket cap screws 304 ss 5/16-18 x 2 | 252 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Galvanized | #10 x 1 1/2 | fastgrip mini driller self drilling screws mechanical galvanized #10 x 1-1/2 slottedate | 237 |
|
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Aluminum | Plain | cla-032-2 pem southco ref-m45938/1-18a2024-t4 aluminum no | 7250 |
| |
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | cls-m3-2 pem self-clinching nut #302/303 sst | 1620 |
| |
| F. Solutions | OH | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Cadmium | flexloc nut light hex thin height 10-24 21fk-1024 cad plated | 100 |
| |
| Bossard | AZ | silicone cap .180 x 1 black | 10132 |
| ||||
| Mansco | MI | Round Spacer | Steel | Zinc/Clear | .375 id x .500 od x 1.50 long steel spacer triv znc | 250 |
| |
| AFI | FL | Electrical Lugs & Terminals | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | perma-seal ring tongue terminal () | 750 |
| ||
| AFI | FL | Curved/Wave Spring Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 0066 x 243 | two wave washer 302 ss 243x305x0066 () | 1000 |
|
| AFI | FL | Machine Screw | 316, 317, A4 Stainless | Plain | M3 x 12 | m3x12 phil flat ms 316 ss din 965a () | 1143 |
|
| AFI | FL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M8 x 25 | m8x25 hex flange bolt c10.9 st zc din 6921 () | 900 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Clear | #5-40 x 1/4 | 5-40x1/4 slotted round ms st zn () () | 4350 |
|
| AFI | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 | m5 nylon insert lock nut ss din 985 () | 3488 |
|
| AFI | FL | obsolete see & use wita-40r-uvb-m () | 800 |
| ||||
| AFI | FL | Saw Blades | Steel | 13 | microblade wire-to-board 13 circuits () | 891 |
| |
| AFI | FL | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | pemsert self-clinching flush fastener () | 2000 |
| |
| AFI | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | miniature self locking nut () | 21200 |
| |
| AFI | FL | Button Head Socket Cap Screw | Steel | Zinc/Clear | #8-32 x 1/2 | 8-32x1/2 button soc hd cs st zn rohs () () | 2236 |
|
| Global Fa | TX | retractable screw fastener southco 47-12-202-10 | 5 |
| ||||
| Global Fa | TX | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | M3-0.50 x 16 | m3-0.5x16 ss socket/cap screw a2 | 6500 |
| |
| Global Fa | TX | Machine Screw | Steel | Zinc/Clear | #4-40 x 1/4 | #4-40x1/4 steel phil/pan m/swith vibratite zinc | 600 |
|
| Olander | CA | Button Head Socket Cap Screw | Steel | Plain | 10-24 x 1 1/2 but soc alloy | 5 |
| |
| Olander | CA | Self-Clinching Stud | Aluminum | Zinc/Clear | self clinch stud alum rohs | 1 |
| |
| Olander | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | washer ss #6 (145 x 500 x 030) | 375 |
| |
| Olander | CA | Machine Screw | Steel | Zinc/Clear | 6-32 x 1 1/2 phil pan stl zn | 410 |
| |
| Olander | CA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 5/16-18 x 4 hex hd gr8 zn ylw nonrohs | 43 |
| |
| Olander | CA | Hex Male/Female Standoff | Aluminum | Plain | 4-40 x 1 1/4 x 1/4 hex m/f standoff alum | 76 |
| |
| Olander | CA | Button Head Socket Cap Screw | Steel | Plain | #6-32 x 2 | 6-32 x 2 but soc alloy () () | 187 |
|
| Olander | CA | Flat Head Socket Cap Screw | Steel | Plain | #10-32 x 5/8 | 10-32 x 5/8 flat soc ti () () | 37 |
|
| Olander | CA | Round Spacer | Aluminum | Chromate Conversion (Iridite, Alodine) | #12 x 1/4 x 1/2 | #12x1/4x1/2 rd spcr alum alodine 1200 () | 902 |
|
| Olander | CA | Button Head Socket Cap Screw | Steel | Zinc/Clear | 4-40 x 1/8 but soc alloy zn non-rohs | () | 100 |
| |
| Arden | WI | Machine Screw | Steel | Zinc/Clear | M4 x 19 | M4x19 tampruf round ms zc | inquire |
|
| Arden | WI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .255 x .750 x .063 | .255 x.750 x.063 fw ss | inquire |
|
| ASFCORP | MI | Foam Tape | 3/8 in x 1/4 in x 25 ft boyd foam tape | 66 |
| |||
| THRDFAST | OK | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/16 | nf-24x1/2 gr5 hex c/s b18.2.1 | 1,306 |
|
| THRDFAST | AL | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 1 | M42-3 extra nf recoil insert (ea.) | 3 |
| ||
| THRDFAST | MS | Deck Screw | Steel | Plain | #6 x 1 5/8 | flat sq.dr deck war acq approved green | 205 |
|
| THRDFAST | AL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 8 | 18-8 ss full thread stud b18.2.1 b18.31.2 | 16 |
|
| THRDFAST | AL | Finished Hex Nut | 316, 317, A4 Stainless | Plain | 7/8 | nf-14 t-316 ss hex nut b18.2.2 | 3 |
|
| THRDFAST | OK | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 4 1/2 x 7/8 | 4 1/2x7/8 za60 flap disc | 10 |
| ||
| THRDFAST | MS | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain | #10 x 1 1/2 | #10x1 1/2 wafer tek torx b18.6.4 | 100 |
|
| THRDFAST | FL | Machine Screw | Steel | Zinc/Clear | #12-24 x 2 | slotted flat m/s b18.6.3 | 196 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 7/8-8 x 13 3/4 | astm a193 b7 all thread stud | 658 |
|
| Lightning | LA | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M10-1.50 x 25 | hex c/s a-4 ss | 201 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B | Plain | 3/4-10 x 3 3/4 | a307 gr.b heavy h/b tef blue | 57 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
