FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| YANKEE | NH | Spring-Loaded Plunger Pin, Pop Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | vlier ball plunger-5/16-18 slotted x .562 long stainless steel w/o locking | 213 |
| |
| YANKEE | NH | Spring-Loaded Plunger Pin, Pop Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 | vlier m6 (1.) x 30 mt plunger s/s nylon patch | 7 |
|
| YANKEE | NH | Curved/Wave Spring Washer | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 5/8 | 5/8 wave washer overlap single turn 17-7 stainless steel | 48 |
|
| YANKEE | NH | Drilling Sets | Steel | 19 | 19pc high speed steel tap and drill set | 1 |
| |
| YANKEE | NH | Electronic Components | t-handle tap wrench #10 to 3/8 tap capacity | 1 |
| |||
| YANKEE | NH | Electronic Components | t-handle tap wrench #12 to 1/2 tap capacity | 1 |
| |||
| YANKEE | NH | Screwdriving Insert Bits & Power Bits | t10 | t10 torx pin-in security bit | 5 |
| ||
| YANKEE | NH | One-Step, Self-Drilling Hollow Wall Anchor (SnapSkru, E-Z Ancor etc.) | Nylon (Polyamide) | Plain / Furnace Black | tie anchor mount nylon black #8(m4) screw | 1000 |
| |
| YANKEE | NH | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain / Furnace Black | heavy duty drilling/tapping fluid 160z. | 1 |
| |
| YANKEE | NH | Teflon (Pipe Thread) Tape | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | teflon tape 1/2 x520 roll | 90 |
| ||
| YANKEE | NH | jet-lok #55465 wicking sealant | 1 |
| ||||
| YANKEE | NH | Cable Clamps & Ties | Nylon (Polyamide) | Plain / Furnace Black | .61 x .86 | panduit cable tie mount #8/m4 screw hole natural nylon .61 x .86 l | 400 |
|
| YANKEE | NH | Service & Repair Kits | 88 | 88pc toggler anchor kit with case | 6 |
| ||
| YANKEE | NH | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #2-56 | 2-56 non-locking self clinch nut s/s .019-.022 | 1020 |
|
| YANKEE | NH | Step Drill Bits (Unibit etc.) | 3/16-1/2 1/4 | unibit set step drill-6 hole 3/16-1/2 1/4 shank | 1 |
| ||
| YANKEE | NH | Internal Type HO Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8 | 5/8 retaining ring-internal s/s | 50 |
|
| YANKEE | NH | Hole Saws | star 1-7/16 hole saw-bi-metal | 1 |
| |||
| YANKEE | NH | Hole Saws | starr 4 hole saw-bi-metal edp 55119 | 1 |
| |||
| YANKEE | NH | Countersink Cutters | 82 | 82deg #6 weldon pilotless countersink usa | 1 |
| ||
| YANKEE | NH | Countersink Cutters | 82 | 82deg #8 weldon pilotless countersink usa | 1 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
