FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| SunPack | FL | Gaskets | 16 | # 1/8 304 corrugated metal/graphite faced ring gasket | 3 |
| ||
| SunPack | FL | Gaskets | 18 | # 1/8 304 corrugated metal/graphite faced ring gasket | 6 |
| ||
| Endries | WI | Valves & Accessories | Brass | 1/8 | 1/8 brass drain cock | 10 |
| |
| Endries | WI | Fuses & Holders | M30amp | fmx-30lp 30amp lo-pro fuse | 5 |
| ||
| Endries | WI | Wrenches | 17/19 | 07900-00632 17/19 spanner wrench | 27 |
| ||
| Liberty | IL | Set Screw (Socket Head) | Nylon (Polyamide) | Plain | 3/8-16 x 3/4 | socket set | 375 |
|
| Liberty | IL | Set Screw (Socket Head) | Steel | Plain | 1/4-20 x 1/2 | socket set flat point | 3,000 |
|
| Liberty | IL | Set Screw (Socket Head) | Brass | Plain | M16-2.00 x 16 | socket set flat point | 18 |
|
| Liberty | IL | Set Screw (Socket Head) | Steel | Black Oxide | #8-32 x 3/16 | socket set cone point black ox rohs | 1,000 |
|
| Liberty | IL | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Painted | #8-32 x 1 | torx (6-lobe) flat 100 18-8 s/s w/pin white | 2,180 |
|
| Liberty | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 1/4-20 x 5/8 | 1/4-20x5/8 slotted hex washer thread rolling screw | 12,000 |
|
| Liberty | IL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 1/2 | slotted indented hex washer tapping type-a | 10,000 |
|
| Liberty | IL | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1 1/4 | torx flat 100 with pin 18-8 304 t15 drive | 816 |
|
| Liberty | IL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10-12 x 1 | slotted indented hex washer tapping type-a #8 | 1,945 |
|
| Liberty | IL | Staples | Steel | Galvanized | 16 | ga medium crown (7/) staplex2 long collated electro | 850,000 |
|
| Liberty | IL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/8 | slotted truss 18-8 s/s st | 500 |
|
| Liberty | IL | Electrical Lugs & Terminals | 22-18 | non-insulated ring terminal 22-18 | 7,400 |
| ||
| Liberty | IL | Machine Screw | Steel | Black Oxide | 1/4-20 x 3/4 | 1/4-20x3/4 6-lobe (torx) 82 flat | 342 |
|
| Liberty | IL | Machine Screw | Steel | Zinc/Yellow | #8-32 x 3/4 | 8-32x3/4 6-lobe (t-20 drive) pan yellow blue nylok torq patch patch 1/8 max from endx1/8 min long patch 1/8 max from endx1/8 min long TPM008C0075ZYNLP | 4,500 |
|
| Liberty | IL | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/4 x 1 3/4 | 1/4x1-3/4 phillips flat tapcon blue TCF025A0175 | 550 |
|
| Liberty | IL | Eye Bolt | Steel | Zinc/Clear | 1/4-20 x 2 | turned wire eye bolt | 65 |
|
| Liberty | IL | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/4 x 1 3/4 | 1/4x1-3/4 slotted hex washer tapcon blue coated TCH025A0175 | 1,040 |
|
| Liberty | IL | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Free Zinc Basecoat + Ceramic Topcoat (Ruspert, Ruspro, Dagger-Guard, etc.) | 1/4 x 6 | phillips flat concrete blue ruspert | 300 |
|
| Liberty | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M3 x 6 | 6-lobe pan tfs type pt | 3,000 |
|
| Liberty | IL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1 | trimmed hex 18-8 s/s | 1,500 |
|
| MESAFAST | CA | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 4 | c/b 18-8 s/s 18-8 s/s | 14.0 |
|
| MESAFAST | CA | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 1 1/2 (5/16-18) | socket sh/b 18-8 s/s 18-8 s/s | 160.0 |
|
| MESAFAST | CA | Threaded Rod | Steel | Plain | 1/2 x 144 | allthread rod | 8.0 |
|
| MESAFAST | CA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-24 x 3/4 | unslotted hwh type-f 18-8 s/s 18-8 s/s | 1,200.0 |
|
| MESAFAST | CA | Sleeve Anchor | Steel | Zinc/Clear | 1/4 x 5 1/4 | phil flat sleeve anchor zinc | 5.0 |
|
| MESAFAST | CA | T-Nut (Tee Nut) | Steel | Plain | 1/4-20 x 7/16 | t nut enclosed head-white head-white | 1,050.0 |
|
| MESAFAST | CA | Socket Head Cap Screw | Steel | Black Oxide | #2-56 x 1/2 | socket c/s black black | 100.0 |
|
| MESAFAST | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #12-14 x 1 | phil flat undercut self-drilling zinc | 94.0 |
|
| MESAFAST | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M6 | external tooth lock zinc | 2,000.0 |
|
| MESAFAST | CA | Metal Drill Bits | 3/8-9 | 3/8 (9 mm) diam pocket hole stepped drill bit hss (.170/4 mm diam pilot tip) hss (.170/4 mm diam pilot tip) | 2.0 |
| ||
| MESAFAST | CA | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1/2-13 | thin pattern nylon insert locknut zinc | 500.0 |
|
| Liberty | IL | Machine Screw | Steel | Black Oxide | #8-32 x 1 | 6-lobe pan | 2,988 |
|
| Liberty | IL | Flat Washer | Steel | Zinc/Clear | .392 | actual idx1-1/16 odx.062 thick flat | 8,730 |
|
| Liberty | IL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 7/8 | 3/8x7/8 18-8 304 backed neoprene | 1,500 |
|
| MESAFAST | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #12-14 x 2 | phil flat self drilling 410 s/s 410 stainless | 500.0 |
|
| Kay-Kar S | MI | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/2-13 x 5 | 1/2-13x5 Gr8 Hex Cap Z/Y | 75 |
|
| Kay-Kar S | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Plain | 1-8 | 1-8 Stover Lock Nut GrC | 25 |
|
| MESAFAST | CA | Threaded Rod | 316, 317, A4 Stainless | Plain | 3/8-16 x 144 | allthread rod 316 stainless 316 stainless | 5.0 |
|
| SunPack | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 2 | 2 18-8 ss flat | 2 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/4-10 x 2 3/4 | a490 hvy h/b geomet 321 per astm f1136 grade 3 | 6 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 1/2-13 x 2 3/4 | a325 hvy hex structural f/t bolt hdg | 5 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/4-10 x 2 1/2 | a490 hvy h/b geomet 321 per astm f1136 grade 3 | 8 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/8-11 x 2 | a490 hvy h/b geomet 321 per astm f1136 grade 3 | 4 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/4-10 x 3 1/4 | a490 hvy h/b geomet 321 per astm f1136 grade 3 | 6 |
|
| SunPack | FL | F436 Round Structural Washer | Steel | Plain | M20 | f436 structural flat sermagard 1105/1280 | 5 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 7/8-9 x 2 3/4 | a325 hvy hex sturctural bolt sermagard 1105/1280 | 2 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/8-11 x 2 1/2 | a490 hvy h/b geomet 321 per astm f1136 grade 3 | 6 |
|
| SunPack | FL | F436 Round Structural Washer | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/8 | f436 flat geomet 321 per astm f1136 grade 3 | 14 |
|
| SunPack | FL | F436 Round Structural Washer | Steel | Plain | M16 | f436 structural flat sermagard 1105/1280 | 4 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/8-11 x 2 1/4 | a490 hvy h/b geomet 321 per astm f1136 grade 3 | 12 |
|
| SunPack | FL | F436 Round Structural Washer | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1 | 1 f436 flat geomet 321 per astm f1136 grade 3 | 11 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1-8 x 3 1/2 | a490 hvy h/b geomet 321 per astm f1136 grade 3 | 4 |
|
| SunPack | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/4-10 x 3 | a490 hvy h/b geomet 321 per astm f1136 grade 3 | 9 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 1 1/4-8 x 7 1/2 | o/a a193 b8m cl2 ss all thread stud | 2 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Cadmium | 1/2-13 x 3 1/4 | o/a a193 b7 all thread stud cad | 4 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 5/8-11 x 11 3/4 | o/a a193 b7 all thread stud | 4 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 5/8-11 x 11 1/2 | o/a a193 b7 all thread stud | 4 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 5/8-11 x 10 1/2 | o/a a193 b7 all thread stud | 4 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
