Buy from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
Bossard | AZ | Sockets | hexalob skt pan head chipboard | 800 |
| |||
Bossard | AZ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | insert 4-40x1.5dia locking heli-coil | 800 |
| ||
Bossard | AZ | Blind Rivet | Aluminum | Plain | rivet open end cs thin flange pop r4712 | 24890 |
| |
Bossard | AZ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | insert 1/4-28x1.5 dia locking heli-coil | 2750 |
| ||
Bossard | AZ | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | standoff stainless penn engineering | 7153 |
| |
Bossard | AZ | nut x-hard pem 300 penn engineering | 51551 |
| ||||
Bossard | AZ | flush mount-low displace.studs penn engineering | 3200 |
| ||||
Bossard | AZ | punch heli-coil | inquire |
| ||||
Hodell | OH | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8-32 x 1/2 | 8-32x1/2 phil pan tfs t/r/s zinc () | 6500 |
|
Fastener | OH | Hex Head Cap Screw | Class 8.8 | Plain | M10-1.50 x 45 | hex head cap screw m10-1.5 x 45mm 8.8 plain | | 50 |
|
Fastener | OH | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25 x 45 | hex head cap screw m8-1.25 x 45mm gr 10.9 zinc plated | din 933 | 710 |
|
Hodell | OH | Machine Screw Nut | Steel | Plain | 1 1/2-8 x 4 | 1 1/2-8x4 covered nut per print plainmaterial ms226 () | 2 |
|
Fastener | OH | Wedge Stud Anchor | 316, 317, A4 Stainless | Plain | 1/4-20 x 3 1/4 | wedge anchor 1/4-20 x 3-1/4 316 ss | | 347 |
|
Fastener | OH | Machine Screw | Brass | Plain | 3/8-16 x 1 3/4 | slotted flat machine screw 3/8-16x1-3/4 brass | 86 |
|
Fastener | OH | Hex Head Cap Screw | Class 10.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M10-1.50 x 110 x 565 | hhcs m10-1.5x110 10.9 magni 565 gray | 54 |
|
Fastener | OH | Carriage Bolt | Grade 5 | Zinc/Clear | 5/16-18 x 1 1/2 | carriage bolt 5/16-18x1-1/2 grade 5 zinc | 1254 |
|
Century | FL | Socket Head Cap Screw | Class 10.9 | Zinc/Clear | M10 x 80.0 | M10.0x80.0 grd 10.9 stl zinc socket hd cap screws din 912 | 1900 |
|
Century | FL | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain | g3109 rubber grommet | 2759 |
| |
Century | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 6 | 6 type-b reg ss black ox | 500 |
|
Mansco | MI | Fully Threaded Stud (All Thread) | Steel | Plain | 1/2-13 x 3 1/2 | full thread stud | 14 |
|
Mansco | MI | Wood Screw | Steel | Plain | #8 x 2 1/2 | rndwa recex lo-root scr type-17 & lube | 2500 |
|
Mansco | MI | Pipe Cap | 1-1/2 square tube cap 14ga abs black | 5895 |
| |||
NAPPCO | TX | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M20 | 20m-2.5 hex fin nut s/s a2 din 934 (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) (160-NUTS (STANDARD)) | 139 |
|
Mansco | MI | F436 Round Structural Washer | Steel | Zinc/Clear | 1-1/4 structural f/w f436 mech znc usa | 300 |
| |
Bostwick | IN | Thread Cutting Tools (Inserts, Boring Bars etc.) | Steel | ccmt 2(1.5)1-wf 5015 turning insert | 30 |
| ||
Bostwick | IN | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 s.s. carriage bolt | 10450 |
|
AFI | FL | Carriage Bolt | Steel | Zinc/Clear | 1/2-13 x 1 | 1/2-13x1 carriage bolt st zn () () | 1000 |
|
AFI | FL | Carriage Bolt | Steel | Zinc/Clear | 1/4-20 x 1/2 | 1/4-20x1/2 carriage bolt st zn () () | 734 |
|
AFI | FL | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | Steel | Plain | #6-32 x 3/8 | 6-32x3/8 flat hd torx pin ms st () | 742 |
|
AFI | FL | Socket Head Cap Screw | Class 12.9 | Zinc/Clear | M2.6 x 4 | m2.6 x 4 soc hd cs c12.9 st zn din 912 () | 3000 |
|
AFI | FL | Broaching Standoff | Steel | Plain | broaching standoff () | 1475 |
| |
AFI | FL | Self-Clinching Stud | Steel | Plain | flush head studs () | 11000 |
| |
AFI | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 fl wash std ss 343x750x050 () () | 8093 |
|
AFI | FL | Sems Machine Screw | Steel | Zinc/Clear | #6-32 x 1/4 | 6-32x1/4 phil pan sq cone sems st zn () () | 4390 |
|
AFI | FL | Machine Screw | Steel | Zinc/Clear | 3/16 | 3/16 hx fm scrw lck stl zn w/blue patch () | 1000 |
|
Global Fa | TX | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 8 | m3-0.5x8 ss slot/pan m/s a2 | 673 |
|
Global Fa | TX | Self-Clinching Standoff | Aluminum | Chromate Conversion (Iridite, Alodine) | 6-32 x 1/4 x 5/8 | 6-32x1/4x5/8 aluminumhex/standoff iridite keystone electronics 8415 | 170 |
|
Global Fa | TX | Ball Stud, Ball Pin | Steel | Zinc/Clear | #6-32 x .421 x 1/4 | 6-32x.421x.250 steel ball/studclear/zinc modified to print tinnerman p116-421-8-3b-mod | 450 |
|
Olander | CA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 5/8 | 6-32x5/8 trim hex screw sst rohs | | 59 |
|
Olander | CA | Hex Jam Nut | Steel | Zinc/Clear | 1/4-28 jam nut stl blk rohs | 122 |
| |
Olander | CA | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 x 3/8 100 deg countersink rivet sst | 20 |
| |
Olander | CA | Round Female/Female Standoff | Nylon (Polyamide) | Plain | 8-32 x 3/8 x 1/2 rd fem standoff nylon | 408 |
| |
Olander | CA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | m10-1.5 x 35 hex hd f/t 8.8 zn | 3 |
| |
Olander | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3-48 x 1 soc cap sst | 64 |
| |
Olander | CA | Brackets & Supports | southco mtng bracket | 35 |
| |||
Olander | CA | Socket Head Cap Screw | Steel | Zinc/Black | 5-40 x 1/2 soc cap blk zn alloy non-rohs | 15 |
| |
Olander | CA | Socket Head Cap Screw | Steel | Plain | m6-1.0 x 35 low hd soc cap alloy | 75 |
| |
Olander | CA | Socket Head Cap Screw | Steel | Plain | 6-32 x 1/2 soc cap alloy | 210 |
| |
Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 1/8 | 2-56x1/8 phil flat 100 deg patch sst () () | 8704 |
|
Olander | CA | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8 x .825 | 1/8 x .825 dowel pin sst rohs () () | 12750 |
|
Olander | CA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2-0.40 x 4 | M2-.4x4 socket set sst patchlk () | 112 |
|
Olander | CA | Socket Head Cap Screw | Steel | Plain | 3/8-16 x 1/2 | 3/8-16 x 1/2 soc cap nylok alloy () () | 100 |
|
Olander | CA | southco () () | 23 |
| ||||
Olander | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #2-32 x 3/16 | 2-32 x 3/16 phil flat t-ab stl zn () () | 8343 |
|
Olander | CA | Machine Screw | Steel | Plain | panduit vertical cord clip () () | 900 |
| |
Mansco | MI | Slotted Spring Pin (Roll Pin) | Steel | Plain | 1/2 x 2 3/4 | 1/2x2-3/4 slotted spring pin pln | 53 |
|
Mansco | MI | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10-32 x 5/16 button hd soc cap scr 18-8 s.s. w/precote 85 | 2000 |
| |
Mansco | MI | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 1/2 | truss f/c phil m/s 18-8 s/s 100/box | 600 |
|
Century | NY | fender flare i-sheet i119 | 203 |
| ||||
Century | NY | subkit # rx204 115130-34 per145130-34 per | 39 |
| ||||
Century | NY | flight refueling ltd # s006-052-0200 | 6500 |
| ||||
Century | NY | Hex Machine Bolt | nas42dd6-24fc | 6 |
| |||
Century | NY | smalley c050-l4-s17 | 245 |
| ||||
Century | NY | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainl ess (A1,A2, 18-8,304,310 etc.) | Plain | raf 2053t-440-ss 3/16 hex 9/32 lng f/f | 53 |
| |
Century | NY | SAE Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 sae flat washer 18-8 | 144 |
| |
Century | NY | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 10 | 10-24 serrated hex flange nut s/s 10-24 serrated hex flange nut s/s waxed | 7900 |
|
Century | NY | Hex Jam Nut | Cadmium/Yellow | an315-3r | 483 |
| ||
Century | NY | Pipe Plugs (Socket) | Steel | Plain | ms27769s3 pipe plug countersink | 9 |
| |
Century | NY | Double End Stud | Grade 5 | Zinc/Yellow | 1/4-20 x 10 3/4 dble end stud rev n gr 5 z/y see print 118531-14sz q5a | 160 |
| |
Century | NY | Socket Head Cap Screw | Grade 8 | Zinc/Yellow | 10-24 x 3/8 socket cap grd 8 zinc yellow 10-24 x 3/8 socket cap grd 8 trivalent zinc yellow per astm b633 ty ii cl fe/zn5 and bake with patch per mil-f-18240 hrc 45-53 | 175 |
| |
Century | NY | Machine Screw | Steel | Zinc/Clear | #6-32 x 1/4 | 6-32x1/4 phillips flat 100 degree m/s steel zinc w/nylon patch | 5810 |
|
Century | NY | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Brass | Plain | spirol 151056 series 20 m2 brass insert | 5000 |
| |
Century | NY | Tubing | dorn equip nyst-3-002 tube stuf | 13 |
| |||
Century | NY | Blind Rivet | Aluminum | Plain | 3/16 x 9/16 | cherry cr2249-6-09 | 8600 |
|
Century | NY | Socket Head Cap Screw | Steel | Plain | 3/8-16 x 2 3/4 socket cap alloy stl | 40 |
| |
Century | NY | cherry 839c1-5 | 1 |
| ||||
Century | NY | Self-Sealing Screw | nas1578a6h68 | 1 |
| |||
Century | NY | heli-coil 3585-06cn207 | 409 |
| ||||
Hodell | OH | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/4-20 x 1/2 | 1/4-20x1/2 grade 8 hex cap screw n. amer. zinc/yellow | 67 |
|
Hodell | OH | Finished Hex Nut | Grade 5 | Zinc/Clear | 1 1/4-7 | 1 1/4-7 gr5 finished hex nut zn | 10 |
|
Hodell | OH | Drop-In Style Anchor | Steel | Zinc/Clear | 1/4-20 | 1/4-20 drop in anchor steel zinc () | 90 |
|
Komar | IL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | 10-32x3/8 slotted flat head machine screw 18-8 ss | 1000 |
|
Alma Bolt | MI | Carriage Bolt | Steel | Plain | 3/8-16 x 2 1/4 | c/b | 906 |
|
BEACON | IL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 5/16-18 x 3/4 | 5/16-18 x 3/4 phillips pan head type f thread cutting screw case hardened steel trivalent zinc & bake rohs compliant | 5000 |
|
Infasco D | GA | Hex Head Cap Screw | Grade 8 | Plain | 1/2-13 x 1 3/4 | 1/2-13x1 3/4 hex head cap screw grade 8 unc plain 1/2-13x1 3/4 | 7150 |
|
Infasco D | TX | Socket Head Cap Screw | Class 8.8 | Zinc/Clear | M10-1.50 x 45 | m10-1.5x45 metric socket cap screws class 8.8 coarse zinc clear m10-1.5x45 | 166 |
|
Infasco D | OH | Socket Head Cap Screw | Class 12.9 | Plain | M10-1.50 x 16 | m10-1.5x16 metric socket cap screws class 12.9 coarse plain m10-1.5x16 | 550 |
|
Fastener | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 35 | hex head cap screw 933 m16-2.0x35 304 | 21 |
|
Fastener | OH | SAE Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | flat sae 10 (.219x.500x.049) 18.8 ss | 610 |
| |
SWACO | OH | Carriage Bolt | Grade 5 | Zinc/Clear | 5/16-18 x 2 1/4 | 5/16-18x2-1/4 crg bolt grade 5 zn | 125 |
|
SWACO | OH | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #14 x 1 | #14x1 hex washer tek zinc | 601 |
|
SWACO | OH | Hex Tap Bolt (Fully Threaded) | Grade A | Zinc/Clear | 3/8-16 x 1 | 3/8-16x1 tap bolt steel grade a zinc a307 | 300 |
|
SWACO | OH | Socket Head Cap Screw | Steel | Black Oxide | M10-1.25 x 25 | M10-1.25x25 shcs alloy 12.9 bo | 300 |
|
SWACO | OH | Machine Screw | Steel | Zinc/Clear | #6-32 x 4 | #6-32x4 ms truss phillips / slotted combotcombo zn | 1900 |
|
Fastener | OH | Deburring Bits | Aluminum | carbide bur sd-5 for aluminum | 34 |
| ||
Fastener | OH | Machine Screw | 316, 317, A4 Stainless | Plain | #6-32 x 5/16 | phillips pan machine screw 6-32x5/16 316 ss | 510 |
|
Fastener | OH | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1/4-20 x 2 3/4 | hex head cap screw 1/4-20x2-3/4 grade 2 zinc | 470 |
|
Empire | WA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 3/4 x 4 | 3/4 x 4 a325 bolt only hdg | 91 |
|
Empire | WA | Wood Drill Bits | 8018 13/16 x 17 | 8018-13/16 x 17 ship auger | 2 |
| ||
Empire | WA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/4-20 x 2 | 1/4-20 x 2 gr.8 hex c/s yzp | 800 |
|
Empire | WA | Flat Head Socket Cap Screw | Steel | Plain | 1/4-20 x 1 | 1/4-20 x 1 flat hd soc c/s | 800 |
|
Empire | WA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain | #8 x 1 | 8 x 1 mod truss phl k-lath | 5700 |
|
Hodell | OH | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Clear | 5/8 x 2 | 5/8x2 yoke pin zinc clear | 650 |
|
Hodell | OH | Heavy Hex Nut | Grade 2H | Plain | 1 1/8-7 | 1 1/8-7 a194 2h heavy hex nuts plain | 764 |
|
Rapid | NY | Solid Rivet | Aluminum | Plain | 5/32 x 11/16 | 100deg.countersink 2117-t4 aluminum i/a/w rev 4 (426 repair) 5/32 x 11/16 alodine (.016 oversize diam) NAS1241AD5-11 | 22.8191 |
|
Rapid | NY | Blind Rivet | Aluminum | Chromate Conversion (Iridite, Alodine) | 100 | 100CTSK 5056 ALUM.BLIND BULB/STEEL SPIND 3/16 X .501-.562 GRIP ANODIZE/ALODINE NAS1739B6-9 | 882 |
|
Rapid | NY | Solid Rivet | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 3/16 x 3/4 | 100deg.countersink monel per qq-n-281 i/a/w rev 3 5/32 x 3/4 MS20427M5-12 | 87.4643 |
|
Rapid | NY | Solid Rivet | 316, 317, A4 Stainless | Plain | 1/8 x 5/16 | flat head 316 stainless steel 1/8x5/16 | 68.9308 |
|
Rapid | NY | Solid Rivet | Brass | Plain | 3/16 x 7/16 | 90 degree countersink brass 3/16x7/16 | 20.1466 |
|
Rapid | NY | Solid Rivet | Aluminum | Anodized | 100deg.countersink 2017-t4 aluminum rev.m 3/16x5/8 blue anodize mil-a-8625 & 3m seal | 0.7 |
| |
Rapid | NY | Solid Rivet | Aluminum | Plain | 7/32 x 5/8 | 100countersink shear hd. 2117-t4 alum. 7/32x5/8 dichromate anod mil-a-8625 reference only-not on print | 56.7654 |
|
Rapid | NY | Solid Rivet | univ.head 2117-t4 alum per as7222 i/a/w rev a 5/32 x 5/16 chromic anod per ams2470 AS125758 | 14.9 |
| |||
Rapid | NY | Solid Rivet | Aluminum | Plain | 1/16 x 3/16 | flat head 1100f aluminum 1/16 x 3/16 AN442A2-3 | 3.09440204622 |
|
Rapid | NY | Solid Rivet | Steel | Plain | 3/16 x 1 1/2 | round/button head mild steel 3/16x1-1/2 | 116.7445 |
|
Rapid | NY | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8 x .126-.187 | dome hd blind-18-8 304/18-8 304 1/8x.126-.187 grip | 122 |
|
Rapid | NY | Solid Rivet | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 5/32 x 7/8 | univ.head inconel 600 per as7232 i/a/w rev e 5/32 x 7/8 annealed AN123359 | 7.056 |
|
Rapid | NY | Solid Rivet | Aluminum | Plain | 4 | 120deg.flush interference tension head 1/8 x 5/16 2117t-4 aluminum i/a/w rev 2 MS14219AD4-5 | 1.2225 |
|
Rapid | NY | Solid Rivet | Aluminum | Plain | 3/32 x 1/2 | 100countersink flush shear hd.7050-t73 alum. 3/32x1/2 chem film mil-dtl-5541 rev b | 10.0064 |
|
Rapid | NY | Semi-Tubular Rivet | Brass | Nickel | 290 | oval head brass semi-tubular i/a/w rev 1 .123 x 17/32 nickel per qq-n-290 MS16535-145N | 44150 |
|
Rapid | NY | Solid Rivet | Steel | Plain | 3/16 x 5/16 | univ.head monel 400 per qq-n-281 i/a/w rev 6 3/16 x 5/16 MS20615-6M5 | 29.926595604392 |
|
SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 | M5x0.8 light hex full height flexslot 300 series 18-8 304 steel w/wax | 1200 |
|
Setko Fas | IL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1 | 1/2-13x1 cone point stainless steel hex socket set screw dfars | 566 |
|
Setko Fas | IL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 1/8 | 2-56x1/8 nylon tip stainless steel hex socket set screw | 2681 |
|
Setko Fas | IL | Set Screw (Socket Head) | Steel | Plain | 1/2-13 x 5/8 | 1/2-13x5/8 cup point alloy hex socket set screw | 1000 |
|
JET FITTING | CA | 74200-12041 avdel double male connextor | 3 |
| ||||
JET FITTING | CA | Hex Machine Bolt | Grade A | Galvanized | 1/2-13 x 4 | 1/2-13x4 hex bolt a307 gr a hdg 495062 b18.2.1 | 85 |
|
JET FITTING | CA | Wing Nut | Steel | Black Oxide | #8-32 | nut wing 8-32 steel black oxide stamped d 14NWSB b18.2.2 | 300 |
|
QCS | OR | Flat Head Socket Cap Screw | Class 12.9 | Plain | M6-1.00 x 10 | M6-1.0x10 flat soc cap screw 12.9 alloy din 7991 | 310 |
|
QCS | OR | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #4-40 x 1/4 | 4-40x1/4 phil flat 100 deg. m/s stainless black oxide | 3677 |
|
QCS | OR | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 10 | M6-1.0x10 phil pan m/s stainless | 18234 |
|
Standard | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 11/16 | 1/4-20x11/16 phillips pan head machine screw 18-8 s/s steel | 25100 |
|
Standard | MA | Carriage Bolt | Steel | Galvanized | 1/4-20 x 7 | 1/4-20x7 carriage bolt galvanized | 200 |
|
Standard | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10-24x1-3/4 phillips round head machine screw 18-8 s/s steel | 9800 |
| |
Standard | MA | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 | 6-32 machine screw nut 18-8 s/s steel | 207820 |
|
Accurate | IN | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 x 3 .531 x 3 | 1/2x3 fender 18-8 ss usa .531x3 x .047-.080 | 1350 |
|
Hodell | OH | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Yellow | 3/8-16 x 2 1/2 | 3/8-16x2 1/2 a193 b7 all thread studzinc yellow | 20 |
|
Hodell | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2-13 x 8 | 1/2-13x8 gr5 hex head cap screw zinc n.amer. | 25 |
|
Hodell | OH | Button Head Socket Cap Screw | Class 12.9 | Plain | M4-0.70 x 8 | M4-.7x8 button soc c/s 12.9 iso 7380thermal blk oxide | 1250 |
|
Hodell | OH | Socket Head Cap Screw | Class 8.8 | Plain | M12-1.75 x 40 x 912 | M12-1.75x40 soc c/s 8.8 din 912 | 5 |
|
Hodell | OH | Hex Machine Bolt | Grade 5 | Galvanized | 1 1/2-6 x 9 | 1 1/2-6x9 grade 5 hex bolt hdg | 10 |
|
EFC | MO | Sems Machine Screw | Steel | Nickel | M6 x 16 | m/ hh fw np pp stl w/ford s439 semblex corporation w506013-s439 | 110835 |
|
Arden | WI | Machine Screw | 400 Stainless (405, 410,416,420,430 etc.) | Black Oxide | 1 x 1 1/4 | 1420x1 1/4 torx pn ms blk | inquire |
|
Arden | WI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #4 x 9/32 | 4x9/32 phillips pn type-b zc | inquire |
|
Arden | WI | Thumb Screw (Plain) | Steel | Zinc/Clear | #10-24 x 3/8 | 1024x3/8 thumb sc zc | inquire |
|
Arden | WI | Hex Head Cap Screw | Grade 8 | Phosphate | 7620 x 1 1/4 | 7620x1 1/4 hcs gr8 96hr phos | inquire |
|
Fastener | OH | Wedge Stud Anchor | Grade A36 | Galvanized | 1 1/2-6 x 20 1/2 | swedged bolt 1-1/2-6x20-1/2 f1554 grade 55 hdg domestic | 24 |
|
Empire | WA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | 5/16-9 x 1 1/4 | 5/16-9x1-1/4 unslot hwh t/s zp | 506 |
|
ASFCORP | MI | Set Screw (Socket Head) | Steel | Black Oxide | #6-32 x 5/16 | 6-32 x 5/16 soc set scw cup pt blk ox pkg | 100 |
|
ASFCORP | MI | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 30 | m6-1ft x 30 hx hd cap scw ss din 933 pkg | 136 |
|
BAYFASTCO | FL | F436 Round Structural Washer | Steel | Plain | 1 1/2 x 1/2 | f436 dom.. structural flat hg | 150 |
|
THRDFAST | OK | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 1 | 7/8-9x3 a325 type-1 str/b (no nut) b18.2.1 b18.2.6 | 8 |
|
THRDFAST | MS | Bent Bolt (U, V, J) | 316, 317, A4 Stainless | Plain | 3/8-16 x 1 1/4 | t-316 ss pipe size u-bolt | 3 |
|
THRDFAST | FL | Flat Head Socket Cap Screw | Steel | Plain | M10-1.50 x 35 | flat socket c/s | 173 |
|
THRDFAST | FL | Machine Screw | Steel | Zinc/Clear | M8-1.25 x 40 | phil pan m/s | 75 |
|
THRDFAST | MS | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3/8 | 18-8 ss socket set cup pt b18.3 | 20 |
|
THRDFAST | AL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #10 x 3 | slotted pan t/s b18.6.4 | 153 |
|
THRDFAST | FL | Bent Bolt (U, V, J) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 4 | 18-8 ss j-bolt | 1 |
|
THRDFAST | AL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 1/4 | 18-8 ss slotted flat m/s b18.6.3 | 357 |
|
BRIGHBEST | IL | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 9/16-18 x 4 | 9/16-18x4 pfc9 hex cap screw - usa zinc yellow | 75 |
|
Valley Nu | WA | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 5/16-18 x 1 1/2 | nc 316 ss hex c/s | 32 |
|
Valley Nu | WA | Hex Head Cap Screw | Grade 5 | Zinc/Black | 1/4-20 x 4 1/2 | nc gr5 hex c/s zb usa | 48 |
|
Valley Nu | WA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Black | #10 x 7/8 | pan slotted sms zb | 851 |
|
Valley Nu | WA | Machine Screw | Steel | Zinc/Black | #2-56 x 1/8 | nc pan slotted zb | 200 |
|
Valley Nu | WA | Machine Screw | Steel | Zinc/Black | 1/4-20 x 2 1/2 | nc pan slotted zb | 366 |
|
Valley Nu | WA | Hex Head Cap Screw | Grade 8 | Plain | 1 1/4-7 x 5 1/2 | nc gr8 hex c/s pl usa | 1 |
|
Valley Nu | WA | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 1/4 | nc 18-8 ss button hd socket c/s | 45 |
|
Valley Nu | WA | Lock Nut, Nylon Insert | Steel | Zinc/Black | 1/2-13 | nc nylon insert lock nut zb | 962 |
|
Valley Nu | WA | Threaded Rod | Grade 55 | Galvanized | 5/8-11 x 12 | ft nc f1554 gr55 all thread rod hdg usa | 23 |
|
Valley Nu | WA | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75 x 75 | gr10.9 hex c/s pl | 2 |
|
Valley Nu | WA | Hex Head Cap Screw | Grade 5 | Zinc/Black | 3/8-24 x 2 1/2 | nf gr5 hex c/s zb usa | 58 |
|
Valley Nu | WA | Hex Head Cap Screw | Grade 8 | Plain | 1 1/8-7 x 10 | nc gr8 hex c/s pl import | 2 |
|
Lightning | LA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M18-2.50 x 45 | hex c/s a-2 ss | 65 |
|
Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1/2-13 x 3 | a193 b8m class 2 all thread stud teflon blue coated | 25 |
|
Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Plain | 1 1/8-8 x 5 3/4 | 1-1/8-8x5-3/4 astm a320 l7 all thread stud | 435 |
|
Lightning | LA | Anchor Bolt | Steel | Plain | 1/2-13 x 8 | l-anchor low carbon 1 hook / 2 thread length / | 230 |
|
Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 1/2-13 x 17 1/2 | astm a193 gr. b8m class 2 all thread stud ss | 795 |
|
Lightning | LA | Shoulder Bolt (Stripper Bolt) | Steel | Black Oxide | M6 x 1 (M5-0.80) | m6x1 soc sh/b blk | 400 |
|
Lightning | LA | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4 | internal tooth lock 410 ss internal tooth 410 ss | 3390 |
|
Lightning | LA | Shoulder Bolt (Stripper Bolt) | Steel | Black Oxide | 3/8 x 5/8 (5/16-18) | soc sh/b blk | 39 |
|
Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Yellow | 1 1/8-8 x 7 3/4 | astm a193 b7 all thread stud | 455 |
|
Lightning | LA | Hex Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 5/16-18 x 5/8 | 5/16-18x5/8 hex c/s 20 | 98 |
|
Lightning | LA | Heavy Hex Nut | Steel | Plain | 2 3/4-8 | astm a194 gr. 4 heavy hex nut | 487 |
|
Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 1-8 x 8 1/2 | astm a193 gr. b16 all thread stud | 540 |
|
Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8 | Plain | 5/8-11 x 5 | a193 b8 heavy h/b | 469 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.