FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| NutsBolts | NE | Eye Bolt | Steel | Zinc/Clear | .192 x 2 1/2 | .192 x 2 1/2 lag eyebolt zp |
| |
| NutsBolts | NE | Shoulder Bolt (Stripper Bolt) | null | Plain / Furnace Black | 1 1/4 x 3 1/2 (7/8-9) | 1 1/4 x 3 1/2 shoulder bolt |
| |
| NutsBolts | NE | Hammers & Mallets | red/green tip mallet |
| ||||
| NutsBolts | NE | Plate Washer (Square & Rect.) | Galvanized | 1 1/2 | 1 1/2 bolt-5/8 x 3 1/2 x 3 1/2 plate washer hdg 1 5/8 hole |
| ||
| NutsBolts | NE | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 5/8-11 x 4 1/2 | 5/8-11 x 4 1/2 ats b7 xylan blue |
| |
| NutsBolts | NE | Flange Screw w/o serr. (Frame Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 ss flange bolt |
| |
| NutsBolts | NE | Nails | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 6 | 60d ss common nail 6 4ga 25lb bucket |
| ||
| Centennia | CO | Zinc Alloy Hammer Drive Anchor (Zamac Nail-In) | Zinc Alloy 3 (Zamak) | Plain / Furnace Black | 1/4 x 1 | 1/4 x 1 nailin anchor | 1773 |
|
| Kanebridge | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Zinc/Black | #8-18 x 2 | #8-18x2 unslt hex wash full thread self drl blk zinc & bake self-drilling screws | 30000 |
| |
| CIF | IL | Hex Head Cap Screw | Grade 8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/2-20 x 1 1/2 | 1/2-20 x 1 1/2 hex cap screw grade 8 magni 565 | 32535 |
|
| CIF | IL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3-0.50 x 12 | m3-0.5 x 12 button head socket cap screw 18/8ss | 3740 |
|
| CIF | IL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 5 | 3/8-16 x 5 hex cap screw 18-8 stainless steel | 17 |
|
| Brikksen | FL | Fender Washer | Plain / Furnace Black | 5/16 x 1 1/2 | 5/16 x 1-1/2 fender washer asme | 54450 |
| |
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain / Furnace Black | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 hex head cap screw asme | 42000 |
|
| Brikksen | FL | Hex Head Cap Screw | Steel | Plain / Furnace Black | M10-1.50 x 100 | m10-1.5 x 100 hex head cap screw din 931 | 1550 |
|
| Brikksen | FL | Drywall Screw | Plain / Furnace Black | #6 x 1 5/8 | #6 x 1-5/8 phillips bugle head drywall | 3120 |
| |
| Brikksen | FL | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Plain / Furnace Black | #10-32 | 10-32 hex k lock nut with external tooth | 46150 |
| |
| Irwin Ind | Ont | Pipe Bushing | 300 Stainless (A1,A2, 18-8,304,310 etc.) | stainless steel machined bushing to drawing 50031202 revision a | 185 |
| ||
| SWACO | OH | Hex Machine Bolt | Grade A | Galvanized | 1/2-13 x 10 | 1/2-13x10 hex bolt a307 gr a hdg | 4 |
|
| Irwin Ind | Ont | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #6-32 x 3/8 | 6-32 x 3/8 pan phillips type-f t/cutting screw zinc tri clear | 500 |
|
| SWACO | OH | Solid Rivet | Steel | Plain / Furnace Black | 2117-T4 | solid rivet nas1097ad3-5 | 295 |
|
| SWACO | OH | Cotter Pin (Split Pin) | Steel | Cadmium | 1/16 x 3/4 | 1/16 x 3/4 cotter pin cad plated stl | 218 |
|
| SWACO | OH | Hex Jam Nut | Steel | Zinc/Clear | M8 | m8 hex jam nut d936 zinc | 200 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20x1-1/4 hhcs gr8 zpy | 801 |
|
| SWACO | OH | Plate Nut (Nutplate, Floating Anchor Nut) | Steel | Plain / Furnace Black | nut self locking plate one lug floating low height ms21062-3 | 128 |
| |
| SWACO | OH | Solid Rivet | Aluminum | Plain / Furnace Black | 5/32 x 5/16 | rivet solid 120 flush interference shear head ms14218ad5-5 | 907 |
|
| SWACO | OH | Thread Repair Kit | Plain / Furnace Black | 819-6 | 819-6 heli-coil kit tap / plug 3/8-16nc | 2 |
| |
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | 1185-03cn099 heli-coil insert | 1000 |
| ||
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain / Furnace Black | 90 | huck hs2p-dt20-28d1 90 spin 2 | 540 |
| |
| UNEEDA | NJ | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 | 3/8-16 fin hex nut 18-8 s/s | | 2700 |
|
| BoltCraft | NE | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/4-16 x 2 1/2 | 3/4-16x2-1/2 hex cap screw fine thread grade 8 zinc yellow 90/ctn-25/pkg | 65 |
|
| NBS | CA | Dowel Pin | Steel | Plain / Furnace Black | 7/64 x 3/4 | 7/64x3/4 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain / Furnace Black | .500 | huck lockbolt pin (c50lr-br24-4ga) ( .250 / .500 | 1050 |
| |
| Field Fas | IL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 2 | #10 x 2 phillips flat t/s type-ab 18-8 ss | 720 |
|
| Field Fas | IL | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 1 | 1/4-20 x 1 soc set cup pt 316 ss | 70 |
|
| Field Fas | IL | Fully Threaded Stud (All Thread) | Steel | Zinc/Yellow | M8-1.25 x 23.37 | m8-1.25 x 23.37 blind threaded stud 3.8-7.9 grip range stl zc/yellow rohs | 1000 |
|
| Field Fas | IL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | 1/4-20 x 3 | 1/4-20 x 3 hex washer head unslotted thread cutting screw type-f stl zinc | 9450 |
|
| OneMonroe | MN | Fender Washer | Steel | Zinc/Yellow | 3/8 x 1 1/2 | 3/8 x 1 1/2 fender washer zy | 250 |
|
| OneMonroe | MN | Thread Repair Kit | Plain / Furnace Black | 7/16-14 | 7/16-14 helical thread repair kit (tools&inserts) | 1 |
| |
| OneMonroe | MN | Sprockets | Plain / Furnace Black | 1 | 40b sprocket 1 finished bore 48 teeth | 1 |
| |
| OneMonroe | MN | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8-32 x 1/4 | 8-32 x 1/4 phillips pan sts f zp | 10000 |
|
| OneMonroe | MN | Metal Drill Bits | Steel | 13/64 x 6 | 13/64 x 6 a/c ext bit. 135 deg. splt pt. | 22 |
| |
| OneMonroe | MN | Handles | 60 | 60 15/16 metal threaded handle | 2 |
| ||
| OneMonroe | MN | Sprockets | Plain / Furnace Black | 1 | 35b sprocket 1 finished bore 24 hardened teeth | 20 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | 10 | 10 in swivel caster forged steel | 4 |
| |
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 3/8 x 1/2 | 3/8 x 1/2 buna-n o-ring (012) | 300 |
|
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Grade B7 | Plain / Furnace Black | 1-8 x 7 1/4 | 1-8 x 7-1/4 a193 b7 fully threaded stud plain | 20 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 5/16-24 x 1 | 5/16-24 x 1 hex cap screw gr 8 | 1217 |
|
| OneMonroe | MN | Blind Rivet | Steel | Plain / Furnace Black | 3/16 x 1/2 | 3/16 x 1/2 pop rivet stl/stl | 500 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Zinc/Clear | M10-1.25 x 140 | m10-1.25 x 140m soc. cap screw zinc | 10 |
|
| OneMonroe | MN | Tapered Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/4 | 18-8 stainless steel taper pin 0.125 large end diameter (#3/0) 3/4 length | 1392 |
|
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 1 1/4 | 4-40 x 1 1/4 socket cap screw stainless | 50 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 7/16 x 1 7/16 | caster swivel grip ring stem sz 7/16 x 1-7/16 wheel sz 2 x 13/16 wheel mat soft rubber bearing plain bore w/side brake load ht 2-5/8 load cap 80 lbs temp rt-40 to +180 f | 4 |
|
| OneMonroe | MN | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | #8-18 x 1 1/2 | #8-18 x 1-1/2 phillips modified truss head self drilling screw #2 point 410 s/s | 1000 |
|
| OneMonroe | MN | Round Spacer | Brass | Zinc/Clear | 3/8-3/8 | 3/8 round spacer 3/8 length hole clearance .218 brass zinc finish | 49 |
|
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Teflon (PTFE) | Plain / Furnace Black | 1 1/4 x 1 3/8 x 1/16 | 1-1/4 id x 1-3/8 od x 1/16 thick white ptfe o-ring as568-usa-made | 38 |
|
| OneMonroe | MN | Service & Repair Kits | brake kit (6 ) shepherd | 2 |
| |||
| API | IA | Machine Screw | Class 4.8 | Zinc/Clear | M2 | cr pan head screw m4-0.7x20 4.8 zncl jdmf15a2c | 7278 |
|
| Alma Bolt | MI | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-20 x 5/8 | 1/2-20 x 5/8 sae st. st. socket set screw c.p. | 200 |
|
| Alma Bolt | MI | External Thread Insert, Self-Tapping Insert | Plain / Furnace Black | #329-8 (1/2-13 int x 3/4-10 ext) e-z lok thread insert | 44 |
| ||
| Alma Bolt | MI | Lock Nut, Flange, w/o serrations | Grade G | Plain / Furnace Black | 3/4-16 | 3/4-16 sae grade g plain finish flanged hex nut (no lock) | 345 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 1/4 | 8-32 x 1/4 phillips pan m/s ss 100 per box f-72 box | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain / Furnace Black | 8 x 3/4 | 8 x 3/4 phillips ovalal type-a 316ss/euro white | inquire |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10-1.50 x 16 | button socket head cap screw a2 m10-1.5 x 16 iso 7380 | 200 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,31 0 etc.) | Plain / Furnace Black | #10 x 1 | #10 x 1 phillips pan head sms type-a 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 2 1/4 | 1/4-20 x 2-1/4 phillips truss m/s ss low contour | 28000 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M20-2.50 x 40 | hex head cap screw full thread a4 m20-2.5 x 40 din 933 | 50 |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | M8 | split lock washer a2 (1.4310) m8 chrome din 127b | inquire |
|
| Brikksen | FL | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8 x 7 | 5/8 x 7 hex lag bolt ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 1 3/4 | 10-32 x 1 3/4 slottedround m/s ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 2 1/2 | 5/16-18 x 2-1/2 hex head cs ss/full thread f593c | 2000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 3 3/4 | 5/16-18 x 3 3/4 hex head cs ss f593c | 500 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12 x 1 | 12 x 1 phillips flat type-a ss. 100 per box f-48box | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M5-0.80 x 12 | slotted cheese head machine screw a4 m5-.80 x 12 din 84 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 4 x 1/4 | 4 x 1/4 phillips pan type-b ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 1/2 | 1/4-20 x 1-1/2 phillips truss m/s ss low contour 100 per box | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 2 | 8-32 x 2 phillips ovalal head m/s 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M1.6-0.35 x 6 | slotted flat head machine screw a2 m1.6-.35 x 6 din 963 | 1000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 4 x 1/4 | 4 x 1/4 phillips flat type-a s/s | inquire |
|
| Brikksen | FL | Clevis Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8 | 3/8 clevis pin (el=1.50/oal=1.75) 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 5/8 | 10 x 5/8 phillips truss type-a ss/chrome plate- | 1000 |
|
| Bossard | AZ | Electrical Connectors & Plugs | pcb conn contact female crimp | 5600 |
| |||
| Bossard | AZ | Hex Jam Nut | Steel | Plain / Furnace Black | nut hex jam thin fine thread | 60 |
| |
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 7/16-14 x 4 1/2 | 7/16-14 x 4-1/2 hex head cap screw 18-8 ss 5 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Optimas | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4 x 50 | m4 x 50mm oal straight shaft a2 ss chamfered ends | 5 |
|
| Optimas | IL | Wire Rope & Cable | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/32 x 10 | 5/32 dia x 10 ft wire rope (7x7) 18-8 ss | 7 |
|
| American | WI | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | Steel | 5 x 7/8 | 5 x 7/8 fiber disc 36 grit 2a aluminum oxide | 50 |
| |
| American | WI | Metal Drill Bits | Steel | 1/4 | 1/4 hose x 1/8 male npt straight bite-to-wire 1-pc crimp fitting #316 ss | 6 |
| |
| Empower H | IL | Wire Rope Clamps, U-Bolt Clamps | Iron | Galvanized | 26 | 260-0001 wire rope clip260-1 malleable iron galvanized finishfor rope size 1 not to be used for overhead lifting | 100 |
|
| AFT Faste | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Black Oxide | M6 | M6 internal star washer blk ox (hbr026) din 6797 | 6646 |
|
| AFT Faste | TX | Hole Saws | 1 7/8 | 1-7/8 bi-metal hole saw | 9 |
| ||
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Grade B7 | Plain / Furnace Black | hex head cap screw a193 grade b7 plain | 137 |
| |
| Siena | IA | Hex Head Cap Screw | Class 8.8 | Black Oxide | M8-1.25 x 20 | M8x1.25x20 hex head cap screw steel 8.8black oxide | 410 |
|
| Olander | CA | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | washer nyl #10 (198 x 255 x 062) | null |
| |
| Brikksen | FL | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 3/8 | 1/4-20 x 3/8 button socket security with pin. 18-8ss | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | 8 x 3/4 | 8 x 3/4 phillips pan tek 410ss/stat bronze | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 2 | 10 x 2 1/4 phillips pan a ss/chrom | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 phillips tr m/s s/s w/black xylan | inquire |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 3/8 | 1/4-20 x 1-3/8 button socket cs ss | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 2 | 1/4-20 x 2 hwh #4pt dril-flex silver stalgard | inquire |
| |
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3-0.50 x 18 | socket head cap screw full thread a2 m3-.50 x 18 din 912 | 18000 |
|
| Brikksen | FL | Hex Head Cap Screw | Steel | Zinc/Clear | 1/4-20 x 3/4 | 1/4-20 x 3/4 hex head cs steel w/zinc plate 403014 | inquire |
|
| Brikksen | FL | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/16 x 1/4 | 3/16 x 1/4 flat head solid rivet ss | inquire |
|
| Hewes | NY | Flat Washer | Steel | Zinc/Black | M12 | M12 flat washer _x000d_ _x000d_zinc black din 125 | 1900 |
|
| FasSpcMfg | FL | Sockets | Duplex Stainless (2205, Ferralium etc.) | 5/16-18 x 5/8 | 5/16-18 x 5/8 socket set cup point duplex 2507 | 6 |
| |
| FasSpcMfg | FL | Sockets | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 1/4-28 x 1/4 | 1/4-28 x 1/4 socket set cup point hastelloy c 276 | 14 |
|
| OneMonroe | MA | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-13 x 1.50 | carriage bolt 1/2-13 x 1.50 stainless | 105 |
|
| OneMonroe | MA | Flat Washer | Superalloy (Inconel, Hastelloy, Alloy 20) | Passivated | .265 x .500 x .016 | washer flat .265 x .500 x .016 a-286 passivate | 500 |
|
| OneMonroe | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1/4 | 6-32x1/4 phillips flat machine screw fully threaded 18 8 stainless steel 5000/carton | 1950 |
|
| OneMonroe | MA | Propell Nut (Hurricane Nut) | Steel | Zinc/Clear | 1/4-20 | 1/4-20 propel nut zinc plated | 1000 |
|
| Empire | WA | Set Screw (Socket Head) | Steel | Plain / Furnace Black | #10-32 x 3/4 | 10-32 x 3/4 soc set sc cup pt | 3000 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2-13 x 1 | 1/2-13 x 1 hex cap screw gr 5 zinc | 248 |
|
| Raw Produ | NJ | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-841 | mlty flat washers 800 304 ss #8-841 | 10053 |
|
| Raw Produ | NJ | Wood Screw | Brass | Plain / Furnace Black | #4 x 3/8 | brass phillips flat head wood screws #4 x 3/8 | 500 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 1 3/8 | socket cap screws 304 ss 3/8-16 x 1-3/8 | 200 |
|
| Raw Produ | NJ | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/8 x 3/4 (#4-40) | shoulder bolts 304 ss 1/8-#4-40 x 3/4 | 184 |
|
| Raw Produ | NJ | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4 x 5/8 | dowel pins 304 ss 1/4 x 5/8 | 525 |
|
| Raw Produ | NJ | Heavy Hex Jam Nut | Steel | Zinc/Clear | 1/4-20 | heavy hex jam nuts zinc 1/4-20 | 4674 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1 1/8-7 x 4 1/2 | hex cap screws grade 2 zinc 1-1/8-7 x 4-1/2 | 500 |
|
| Raw Produ | NJ | Eye Bolt | Steel | Zinc/Clear | 1/2-13 x 1 1/2 | eye bolts shld-zinc 1/2-13 x 1-1/2 | 200 |
|
| Fastenerc | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | #10-24 (9505-10) | 10-24 (9505-10) steel nutsert zinc | 21750 |
|
| Fastenerc | OH | Flat Washer | Brass | Plain / Furnace Black | .260 | #14s .260 id .562 od .040 thk brass flat washer plain | 3187 |
|
| AEROSPCE | MN | Blind Rivet | Aluminum | Plain / Furnace Black | 3/16 (.063-.250) | ad62-64bslf pop rivet-aluminum/steel 2k/box ad62-64bslf | 507 |
|
| F. Solutions | OH | Finished Hex Nut | Grade 8 | Zinc/Yellow | 1/4-28 | finished hex nut 1/4-28 gr8 zinc yellow | 325 |
|
| F. Solutions | OH | Socket Head Cap Screw | ASTM A574 | Plain / Furnace Black | 5/16-18 x 1 1/4 | socket head cap screw 5/16-18x1-1/4 alloy drilled head | 6 |
|
| Mansco | MI | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Passivated | 5/16-32 x 1 button soc cap 316 s.s. passivated w/dri-loc 204 red (per print) | 4260 |
| |
| AFI | FL | Electrical Lugs & Terminals | Plastic | Plain / Furnace Black | #16-14 | #16-14 pin terminal vinyl insulated () | 1078 |
|
| AFI | FL | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | self clinching flush nut stainless steel () | 4475 |
| |
| AFI | FL | Self-Tapping Thread Rolling Screw | Steel | Plain / Furnace Black | #8-32 x 1/2 | 8-32x1/2 torx pan combo sems thread rolling screwst () () | 23812 |
|
| Olander | CA | Set Screw (Socket Head) | Steel | Plain / Furnace Black | pic m4 x 14 soc set si-grip | 5 |
| |
| Olander | CA | Service & Repair Kits | conversion kit for aa480 tool | 1 |
| |||
| Olander | CA | Set Screw (Socket Head) | Steel | Plain / Furnace Black | 6-32 x 3/4 soc set oval pt alloy | 1254 |
| |
| Olander | CA | Solid Rivet | Aluminum | Plain / Furnace Black | universal hd rivet soft 1100 alum | 2963 |
| |
| Olander | CA | Hinges | southco lift off hinge 2 part assy | 34 |
| |||
| Olander | CA | Flat Washer | Steel | Plain / Furnace Black | southco wear wash nat nyl () () | 548 |
| |
| Olander | CA | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | lee spring comp spring sst () () | 174 |
| ||
| Olander | CA | PC Board Supports & Spacers | Nylon (Polyamide) | Plain / Furnace Black | circuit board supp nyl .125 hole size () () | 34720 |
| |
| Olander | CA | Solid Rivet | Aluminum | Plain / Furnace Black | 1/16 x 5/32 | 1/16 x 5/32 100 deg ctsk rivet () () | 565 |
|
| Olander | CA | Flat Washer | Steel | Plain / Furnace Black | 4 | 4 filler wash nyl () () | 1189 |
|
| Olander | CA | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Zinc/Clear | #10-24 x .020-.130 | insert 10-24x.020-.130 stl non-rohs () | 355 |
|
| Olander | CA | Installation & Setting Tools | 3/8-24 | 2391-6cn938 3/8-24 heli-coil twins outer ins () () | 26 |
| ||
| Olander | CA | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | lee spring comp spring sst () () | 118 |
| ||
| Accurate | IN | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 3/16 x 1 1/2 | 3/16x1-1/2 fender flat ss passivated usa .218x1.5x.047-.080 | 2800 |
|
| F. Solutions | OH | don t use. | 2 |
| ||||
| FTS | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 7/8-9 x 8 1/2 | 18-8ss | 19 |
|
| Arden | WI | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3824 x 1 3/4 | 3824x1 3/4 hcs gr5 zc | inquire |
|
| Arden | WI | Flat Washer | Steel | Zinc/Clear | .344 x 1.25 x .105 | 1.25 x.344 x.105 fw zc | inquire |
|
| Arden | WI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #12 x 1 3/4 | 12x1 3/4 phillips pn type-a zc | inquire |
|
| Arden | WI | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 50 | M8x1.25x50 hcs 302ss din331 | inquire |
|
| ASFCORP | MI | Button Head Socket Cap Screw | Class 10.9 | Black Oxide | M4-0.70 x 6 | m4-.7 x 6 butt hd soc cap cl 10.9 iso 7380-1 blk ox pkg | 1,000 |
|
| THRDFAST | MS | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1-8 x 3 | 18-8 ss socket c/s b18.2.1 b18.3 | 9 |
|
| THRDFAST | AL | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/4 | phil truss m/s b18.6.3 | 35 |
|
| THRDFAST | OK | Hex Head Cap Screw | Grade 5 | Galvanized | 3/8-16 x 2 1/2 | gr5 hex c/s hdg domestic b18.2.1 | 8 |
|
| THRDFAST | OK | Fully Threaded Stud (All Thread) | Steel | Galvanized | 7/8-9 x 31 | all thread stud hdg b18.2.1 b18.31.2 | 4 |
|
| Lightning | LA | Heavy Hex Nut | Grade 8M | Plain / Furnace Black | 3/8-16 | astm a194 gr. 8m heavy hex nuts | 1482 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1-8 x 6 1/4 | 1-8x6-1/4 astm a320 l7 all thread stud tfe black | 666 |
|
| Lightning | LA | Threaded Rod | Grade B7 | Plain / Furnace Black | 1/2-13 x 6 | ft astm a193 b7 all thread rod | 620 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 2-8 x 27 3/4 | 2-8x27-3/4 astm a320 l7 all thread stud tfe black | 800 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 7/8-9 x 4 1/2 | 7/8-9x4-1/2 astm a193 b8 1 all thread stud teflon green | 472 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
