FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | MN | Knobs & Star Grips | knurld knob/blank flange | 10 |
| |||
| OneMonroe | MN | Button Head Socket Cap Screw | Steel | Plain | M4-0.70 x 40 | m4-.7 x 40 button soc cap screw | 200 |
|
| OneMonroe | MN | Nylon Nail-In Anchor | Nylon (Polyamide) | Plain | 1/4 x 3/4 | 1/4 x 3/4 nylon nailin | 700 |
|
| OneMonroe | MN | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/8 | 8-32 x 5/8 but hd sock cap scr ss/blk | 425 |
|
| OneMonroe | MN | Dowel Pin | Plain | 1/2 x 4 1/2 | 1/2 x 4 1/2 dowel pin | 6 |
| |
| OneMonroe | MN | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Plain | 5/16-18 | j type-cage nut 5/16-18 screw size | 1 |
| |
| OneMonroe | MN | Threaded Rod | Class 4.6 | Plain | M22-2.50 x 1 | m22-2.5 x 1 meter threaded rod class 4.6 plain din 975 | 5 |
|
| OneMonroe | MN | Machine Screw | Zinc/Black | #8-32 x 1/2 | 8-32 x 1/2 slottedflat m/s black zinc | 1 |
| |
| OneMonroe | MN | USS Flat Washer | Silicon Bronze | Plain | 1/4 | 1/4 uss flat washer sili.bronze | 500 |
|
| OneMonroe | MN | Eye Bolt | Steel | Plain | 1/2 x 6 | 1/2 x 6 turned eye bolt | 72 |
|
| OneMonroe | MN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 | m4 flat washer ss din 125a | 3670 |
|
| OneMonroe | MN | Carriage Bolt | Rubber, Buna-N, Neoprene etc. | Plain | 3/4 | rubber bumper w/washer blk-od .750 id .192 id ht .250 cb dia .375 ht .562 | 120 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 12 | bearing slide 12 inch length (10 per)_ load cap. 150 lbs w/stop out | 24 |
| |
| OneMonroe | MN | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/8 x 1 1/8 | 1/8 x 1 1/8 dowel pin ss | 800 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | 5/16-18 x 1 1/4 | pph ms 5/16-18 x 1 1/4 zc w/loctite patch | 2200 |
|
| OneMonroe | MN | Masonry & Concrete Drill Bits | Steel | 5/8 x 18 3/4 | 5/8 x 18-3/4 oal 16 usable sds-plus masonry drill bit | 2 |
| |
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | #8-32 x 1/2 | 8-32 x 1/2 phillips tr hd m/s-zp black | 9200 |
|
| OneMonroe | MA | External Push-On Shaft Retainer | Steel | Phosphate | tinnerman push on fastener phos/oil | 800 |
| |
| Century | FL | Machine Screw | Steel | Zinc/Clear | M4 x 8 | m4 x 8 freedrive phil pan steel zinc w/red patchlok w/nylok corp bn 1435 | 8551 |
|
| Century | FL | Flat Washer | 316, 317, A4 Stainless | Plain | .531 x 1.50 x .098 | .531 x 1.50 x .098 flat washer 316l stnlss stl (tolerances +/-.005) | 250 |
|
| Century | FL | Machine Screw | Steel | Zinc/Clear | M4 x 5 | m4 x 5 phillips flat mach screw stl trivalent zinc clr e2a din 965 | 39240 |
|
| Century | FL | Self-Sealing Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .188 | wa-510 ss annealed ring .188 shaflat dia. stainless steel ms3211-1-cr | 464 |
|
| Century | FL | Cable Clamps & Ties | Plain | 10 | ms3367-7-0 | 103 |
| |
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 7/8 | screw 4-40 x 7/8 fhm 300ss 82deg | 91 |
|
| Century | FL | Solid Rivet | ms20426ad5-5 | 2417 |
| |||
| Century | FL | Round Female/Female Standoff | Plain | spacer-fsi spacer-fsi parker parker | 1000 |
| ||
| Century | FL | northrop grumman 561r136ti-4-8 screw | 3386 |
| ||||
| Century | FL | Hex Head Cap Screw | Class 10.9 | Zinc/Yellow | M16 x 80 | m16 x 80 hex c/s 10.9 steel zinc yellow din 933 | 76 |
|
| Century | FL | Socket Head Cap Screw | Plain | nas1351n4-30 | 14 |
| ||
| Century | FL | Machine Screw | Cadmium | nas1801-3d8 | 106 |
| ||
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M3.12 x 5 | 3bt-p8347-00 m3.12x 5 torx pan 3bt-p8347-00 m3.12x 5 torx plus pan plastite zinc rohs camcar 3bt-p8347-00 | 2800 |
|
| Century | FL | Socket Head Cap Screw | null | Plain | nas1787a32 clamp saddle | 43 |
| |
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/4 | bae 263756778 ms16995-20 captive screw modified per safran drw 5500922958 rev.-bae systems 263756778 | 92 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M8-1.25 x 12 | m8-1.25 x 12mm cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow iso 4162 | 10000 |
|
| NBS | CA | 12 Point Flange Screw (CounterBore) | Steel | Black Oxide | 3/4-16 x 7 | 3/4-16x7 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| QCS | OR | Socket Head Cap Screw | ASTM A574 | Plain | 5/16-18 x 1 3/4 | 5/16-18x1-3/4 socket cap screw alloy fully threaded | 119 |
|
| QCS | OR | Conical Disc Spring Washer, Disc Spring, Belleville Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Yellow | 5808-18-8 disk spring washer zinc & yellow seastrom | 5062 |
| |
| Alma Bolt | MI | Square Head Bolt | Grade 8 | Plain | 3/4-10 x 2 | 3/4-10 x 2 square head bolt grade 8 | 12 |
|
| QCS | OR | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 1/8 | 2-56x1/8 slotted round m/s stainless | 600 |
|
| Alma Bolt | MI | Flat Washer | Rubber, Buna-N, Neoprene etc. | Plain | .187 x .750 x .165 | .165 id x .750 od x .187 tk neoprene flat washer | 3316 |
|
| Alma Bolt | MI | Self-Tapping Floorboard Screw (type-f) | Plain | 1/4-20 x 1 | 1/4-20 x 1 phillips floor board screw | 1381 |
| |
| CIF | IL | Lock Nut, Flange, w/o serrations | Grade 8 | Zinc/Clear | 3/4-10 | 3/4-10 hex flange locknut grade 8 plated per tms 4523 | 1681 |
|
| CIF | IL | Split Lock Washer | Grade 2 | Galvanized | 5/8 | 5/8 splitlock washer grade 2 hot dip galvanized | 498 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 20 | socket set screw flat point a2 m6-1.0 x 20 din 913 | inquire |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 4 | 3/8-16 x 4 carriage bolt ss | 1000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3 | 3/8-16 x 3 phillips truss m/s s/s | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M12-1.75 x 150 | hex head cap screw partial thread a4 m12-1.75 x 150 din 931 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 4 1/2 | 1/2-13 x 4-1/2 hex hd cs ss/ch- | inquire |
|
| Brikksen | FL | Wood Screw | Brass | Plain | #6 x 3/4 | 6 x 3/4 phillips flat wood screw brass | inquire |
|
| Brikksen | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/8 | 8-32 x 3/8 phillips pan ty f 18-8ss waxed | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | M4-0.70 x 40 | phillips pan head machine screw-50 per bag a4 ph m4-.70 x 40 din 7985 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 3/4 | 1/2-13 x 3/4 hex head cs ss f593c | 10000 |
|
| Brikksen | FL | Blind Rivet | Aluminum | Plain | ad612abslf lg fl alum rivet rivad612abslf | 1000 |
| |
| Brikksen | FL | Wood Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 1/4 | 8 x 1-1/4 square flat bugle type-17 305ss 50/50 thread | 2000 |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M4-0.70 x 8 | socket head cap screw full thread a4 m4-.70 x 8 din 912 | 2000 |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | #8-32 x 1/2 | 8-32 x 1/2 skt hd cs 316s/s | 16000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3/4 | 5/16-18 x 3/4 ph pan m/s ss | 4000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 5/8 | 10-24 x 5/8 phillips round head m/s 18-8 ss | inquire |
|
| Brikksen | FL | Wood Screw | Silicon Bronze | Plain | #6 x 1 1/4 | #6 x 1-1/4 r&p (frearson drive) flat head wood screw silicon bronze 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 40 | slotted cheese head machine screw a2 m8-1.25 x 40 din 84 | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .281 x .625 x .050 | 1/4 flat washer .281 id x .625 od x .050 thk 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1/2 | #10 x 1/2 phillips truss head sms type-a 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 | 3/4-10 hex finish nut 304ss-domestic mfg. | inquire |
|
| Marshall | MI | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 7 | 3/4-10x7 wedge anchor s/s | 3 |
|
| Brikksen | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10-24 x 1 | 10-24 x 1 phillips pan f 410 ss | inquire |
|
| Brikksen | FL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 5 1/4 | 5/8-11 x 5 1/4 fully threaded stud ss | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | Plain | 1/4-14 x 2 | 1/4-14 x 2 hex washer tek bi-metal #2 point | inquire |
| |
| Brikksen | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 | hex lock nut w/ white nylon insert a2 m10-1.5 din 985 | 4000 |
|
| Brikksen | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M4-0.70 x 12 | hex head cap screw full thread m4-.70 x 12 class 8.8 steel zinc din 933 | inquire |
|
| EASTERN SCREW | RI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 7 x 1/2 | 7 x 1/2 phillips flat undercut type-a 410 heat treat | 520 |
|
| GLF | OH | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #12 x 3/4 | #12 x 3/4 slotted ind hwh s/m/s type-a stl zc | 1287 |
|
| SWACO | OH | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 9/16 | part stainless worm gear hose clamp 9/16 ? wide size 72 | 500 |
| |
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 1185-04en280 spec heli-coil insert | 876 |
| ||
| SWACO | OH | Insert Installation Tools & Accessories | Plain | 43193-9 heli-coil tap | 4 |
| ||
| SWACO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain | nutplate floating rivetless | 29 |
| ||
| SWACO | OH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Plain | 6675-2br040 dodge ultrasert iii | 1 |
| ||
| SWACO | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 12 | m4 x .7 x 12mm phillips pan m/s a2 ss | 500 |
|
| GLF | OH | Flat Washer | Brass | Plain | 13/64 x 3/8 x .031 | 13/64 x 3/8 x .031 special flat washer brass | 2075 |
|
| GLF | OH | Blind Rivet | Aluminum | Plain | 3/16 (1/64) | 3/16 x 1/64 to 1/4 grip range-large flange-rivet-alum/alum-#11 drill 169624 | 900 |
|
| Siena | IA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 | 5/8-11 hex nut stainless steel 18-8 plainfinish asme b18.3 | 200 |
|
| Optimas | IL | Springs (Extension) | Steel | Zinc/Clear | .375 x 1.125 | .375 od extension spring 1.125 free lgth music wire zinc .031 wire dia 14.7 coils | 154 |
|
| Optimas | IL | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Zinc/Clear | M4-0.70 | m4x0.7 cage nut steel zinc trivalent 1.7mm-2.5mm pnl 6.1mm hgt rohs (cn) | 399 |
|
| American | WI | Clevis Pin | Grade B8M | Zinc/Yellow | 1 x 5 | 1x5 clevis pin a193-b7 zinc yellow | 84 |
|
| American | WI | Captive Panel Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #6-32 | #6-32 panel screw retainer washer #18-8 ss (.112 id x .171 od x .010 thk) | 500 |
| |
| American | WI | Sems Machine Screw | Steel | Zinc/Clear | M3 x 12 | m3x12 phillips pan hd sems zinc w/flat washer (7mm od) & lock washer | 2800 |
|
| Brikksen | FL | Nails | 316, 317, A4 Stainless | #18 x 3/4 | #18 x 3/4 brad 316 ss (2364/lb) 100 per small bag 5 small bags per master pack-generic brand | inquire |
| |
| IndexFast | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M1 x 075 | machine screw 300 stainless (a1 a2 18-8 304 310 etc.) plain m1 x 075 m1420x075ppss 1/4-20 x 3/4 phillips pan machine screw stainless steel m1420x075ppss 1/4-20 x 3/4 phillips pan machine screw stainless steel | inquire |
|
| AFT Faste | TX | Ball Bearings, Balls, Bearing Mounts | gfi-1011-08 g300 flange bearing | 75 |
| |||
| AFT Faste | TX | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | Zinc/Clear | 4 1/2 x 1/4 x 5/8 11 | 4-1/2x1/4x5/8-11 type-27 pfx germany zirconia grinding wheel | 150 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3/4 | 5/16-18 x 3/4 hex head cap screw 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | 3000 |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | M6-1.00 x 20 | phillips pan head machine screw a4 ph m6-1.0 x 20 din 7985 | 2000 |
|
| Brikksen | FL | Cap Nut (Acorn Nut) | 316, 317, A4 Stainless | Plain | 3/4-10 | 3/4-10 hex cap nut 316ss | 20 |
|
| Brikksen | FL | Flat Washer | Nylon (Polyamide) | Plain | .375 x .625 x .062 | .375 x .625 x .062 f/w natural nylon | 1000 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M24-3.00 x 70 | socket head cap screw full thread a2 m24-3.0 x 70 din 912 | inquire |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 1/2 | 1/4-28 x 1/2 button socket cs ss | inquire |
|
| Brikksen | FL | T-Head Bolt (T-Slot Bolt, Hammer Head Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 25 | t-bolt (28/15) t-bolt a2 m8-1.25 x 25 | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 25 | socket head cap screw full thread a2 m5-.80 x 25 din 912 | 22000 |
|
| Brikksen | FL | Carriage Bolt | Steel | Plain | 5/16-18 x 3/4 | 5/16-18 x 3/4 carriage bolt s/z 489043 | inquire |
|
| Hewes | NY | Electrical Lugs & Terminals | Plastic | Plain | 16-14 | 16-14 blue vinyl insulated male disconnect | 500 |
|
| NutsBolts | NE | Bent Anchor Bolt (J-Bolt, L-Bolt) | Steel | Zinc/Clear | 3/8-16 x 10 | 3/8-16 x 10 j-bolt zp | 105 |
|
| NutsBolts | NE | Cable Clamps & Ties | Plastic | Plain | 15 | tie cable plastic 15 long | | 160 |
|
| OneMonroe | MA | Flat Washer | Nylon (Polyamide) | Plain | .315 x .890 x .215 | .315 x .890 x .215 nylon flat washer black | 100 |
|
| OneMonroe | MA | Wedge Stud Anchor | Steel | Plain | 3/8 x 2 3/4 | wedge 3/8 x 2-3/4 | 150 |
|
| OneMonroe | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 3/4 | #10-24 x 3/4 phillips fillister head machine screw 18-8 stainless steel | 308 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/8 | 8-32 x 3/8 6-lobe button hd p/in m/s plated | 928 |
|
| Empire | WA | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Plain | 1/4-20 | 1/4-20 serr flange l/n | 3250 |
|
| Empire | WA | Flat Head Socket Cap Screw | Steel | Plain | 3/8-16 x 3 | 3/8-16 x 3 flat soc c/s | 29 |
|
| Field Fas | IL | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Black | 3/8-16 | 3/8-16 keps nut stl zc/blk rohs | 218 |
|
| Field Fas | IL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 1 | 2-56 x 1 soc cap 18-8 ss | 77 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Aluminum | Plain | huck pin (c50lr-br24-24ga) grip ( 1.50-1.75 ) mto | 1700 |
| |
| Irwin Ind | Ont | Flat Head Socket Cap Screw | Steel | Zinc/Clear | M6 x 25 | M6x25 soc csk zinc plated din 7991 | 100 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1-72 x 3/4 | socket cap screws 304 ss #1-72 x 3/4 | 937 |
|
| Raw Produ | NJ | Deck Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #7 x 1 | square drive deck screws trim head 305 ss #7 x 1 | 625 |
|
| Raw Produ | NJ | Dowel Pin | 316, 317, A4 Stainless | Plain | 3/32 x 3/4 | dowel pins 316 ss 3/32 x 3/4 | 1504 |
|
| Raw Produ | NJ | Lock Nut, Center Locking, All Metal (2-Way Reversible) | 316, 317, A4 Stainless | Plain | 1/4-20 | two way lock nuts 316 ss 1/4-20 | 352 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 7/8 | socket cap screws 304 ss #6-32 x 7/8 | 9089 |
|
| Raw Produ | NJ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 5/8-18 x 1d | heli-coil threaded inserts 303 ss 5/8-18 x 1d 31410 | 190 |
|
| Raw Produ | NJ | U-Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 1/2 | u-bolts 304 ss 3/8-16 x 2-1/2 pipe x 3 bl | 500 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 110 | metric socket cap screws a2 ss m8 x 1.25 x 110m pt | 148 |
|
| Raw Produ | NJ | Threaded Rod | Brass | Plain | #6-32 x 6 | threaded rod brass #6-32 x 6ft | 500 |
|
| Raw Produ | NJ | Threaded Rod | Brass | Plain | #6-32 x 6 | threaded rod brass #6-32 x 6ft | 500 |
|
| Raw Produ | NJ | Cable Clamps & Ties | 4 | cable ties 4 18lb natural clear 100/bag-4-18-n-100 | 10800 |
| ||
| Raw Produ | NJ | Hex Head Cap Screw | Steel | Galvanized | 5/8-11 x 1 3/4 | hex cap screws hdg 5/8-11 x 1-3/4 ft | 91 |
|
| Fastenerc | OH | Blind Rivet | Aluminum | Galvanized | 1/8 (.031/.187) | 1/8 (.031/.187) alum/stl m/grip low prfl bld rivet zinc 01v16610410a0 | 19500 |
|
| AEROSPCE | MN | fh-m6-20zi pem 20mm long(flush-head)self-clinching | 1691 |
| ||||
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | cls-m8-1 pem self-clinching nut #302/303 sst | 9000 |
| |
| AEROSPCE | MN | 07150-06015 avdel | 1 |
| ||||
| AEROSPCE | MN | sl-m4-2zi pem tri-dent self-clinching locknut | 2160 |
| ||||
| AEROSPCE | MN | so4-m3-6 pem 6mm long 400 series sst thru-hole | 1255 |
| ||||
| Vogelsang | NJ | Slotted Spring Pin (Roll Pin) | Plain | M21 x 30 | 21 x 30 slotted spring pins iso 13337 din 7346 | 6500 |
| |
| Vogelsang | NJ | Slotted Spring Pin (Roll Pin) | Plain | M25 x 30 | 25 x 30 metric slotted spring pins iso 8752 din 1481 | 1860 |
| |
| F. Solutions | OH | Cotter Pin (Split Pin) | Steel | Zinc/Clear | cotter pin 7/64 x 1-1/2 zinc | 1401 |
| |
| F. Solutions | OH | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | phillips pan sheet metal #12 x 3 steel zinc | 4000 |
| |
| F. Solutions | OH | Socket Head Cap Screw | ASTM A574 | Plain | 5/16-18 x 3 | socket head cap screw 5/16-18 x 3 alloy steel | | 197 |
|
| Wurth Ind | IN | Machine Screw | Steel | Zinc/Clear | #6-32 x 5/16 | flat head machine screw 82 st zn slotted 6-32x5/16 steel zinc/clear | 19837 |
|
| Wurth Ind | IN | Slotted Hex Nut | Grade 2 | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 1 1/2-12 | slotted hex nut grade 2 zfshr 1 1/2-12 non-electrolytic zinc & aluminum flakes + matrix | 29 |
|
| WINA | MN | Dowel Pin | Aluminum | Plain | M1 x 2 | hardened ground dowel pin alloy pl 1x2 | 3105 |
|
| WINA | MN | Machine Screw | Brass | Brass Plated | 1/4-20 x 5/8 | pan head machine screw 18 8 slotted 1/4-20x5/8 | 249.5 |
|
| Mansco | MI | Round Spacer | Nylon (Polyamide) | Plain | .285 id x .985 od x .250 thk nylon spacer black | 4680 |
| |
| Mansco | MI | Flat Washer | Steel | Chrome Plated | 16.54 chrome wardrobe rod deburred-per print (5 pcs per full length rod) | 5 |
| |
| Mansco | MI | Machine Screw | Steel | Zinc/Clear | 10-32x1-1/2 indented hex washer unslotted m/s triv znc w/serr | 6000 |
| |
| AFI | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1/4 | 6-32x1/4 combo pan ms ss () () | 1020 |
|
| AFI | FL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/16-18 x 5/8 | 5/16-18x5/8 hex hd cs g5 st zn () () | 8897 |
|
| Olander | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 3/8 ext tooth l/w stl zn | 68 |
| |
| Olander | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 4 soc cap sst | 61 |
| |
| Olander | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1 1/2 soc cap f/t sst | 42 |
| |
| Olander | CA | Socket Head Cap Screw | ASTM A574 | Plain | 7/16-14 x 1 1/2 soc cap alloy | 25 |
| |
| Olander | CA | Hex Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-40 x 9/16 x 1/4 hex fem standoff sst rohs | 36 |
| |
| Olander | CA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/16-20 x 2 hex hd gr8 ylw zn non-rohs | 3 |
| |
| Olander | CA | Round Female/Female Standoff | Steel | Plain | 4-40 x 1/2 x 1/4 rd fem standofff phen | 145 |
| |
| Olander | CA | Shoulder Bolt (Stripper Bolt) | Steel | Plain | M12 x 70 (M10-1.50) | m12 x 70 shoulder bolt alloy | 12 |
|
| Olander | CA | Machine Screw | Steel | Plain | #6-32 x 1 1/4 | 6-32x1 1/4 phil flat 100 deg patch () | 504 |
|
| Olander | CA | Self-Clinching Standoff | Steel | Zinc/Clear | self clinch standoff stl zn non-rohs () | 500 |
| |
| Mansco | MI | Socket Head Cap Screw | Steel | Zinc/Black | #10-24 x 3 1/2 | soc c/sr triv blk znc | 800 |
|
| Rapid | NY | Hex Machine Bolt | Steel | Cadmium | 5/16-24 x 1 19/32 | bolt machine aircraft alloy steel 5/16-24 unf-3a 0.312-0.309 dia. x 1.594 long 1.063 grip cadmium plated ams-qq-p-416 type ii class 2 un-drilled head & shank AN5-14A | 3171 |
|
| Rapid | NY | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/32 x 1/4 | 100 degree countersink.18-8 304 steel rev 3 5/32 x 1/4 annealed MS20427F5-4 | 1.31 |
|
| Rapid | NY | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Plain | 12 1/4-28 x .211 | countersink hd steel rivet-nut open keyed rev 12 1/4-28 thread x .211-.271 grip cadmium NAS1330S4K271 | 1078 |
|
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 5/32 x 9/16 | 100 degree countersink 2117-t4 aluminum i/a/w rev 3 5/32 x 9/16 clear anodize/mil-a-8625 MS20426AD5-9A | 6.9227 |
|
| Rapid | NY | Solid Rivet | Aluminum | Passivated | 3/16 x 1 | univ.head 347 cres per as7229 i/a/w rev b 3/16 x 1 annealed passivated AN123226 | 25.3958 |
|
| Rapid | NY | Solid Rivet | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 3/32 x 3/8 | 100deg.countersink inconel 600 per as7232 i/a/w rev c 3/32 x 3/8 annealed AN123621 | 57.18573661972 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 6 3/16 x 7/8 | brazier head 6061-t6 aluminum 3/16x7/8 | 5.87 |
|
| Rapid | NY | Semi-Tubular Rivet | Brass | Black Oxide | 100DEG.CTSK.SEMI-TUB.QQW321 BRASS I/A/W REV:A .061 X 7/32 STRAIGHT HOLE, BLACK OXIDE MS51499S9B | 40000 |
| |
| Rapid | NY | Full-Tubular Rivet | Copper | Cadmium | rivet tubular-truss hd .120-.130 copper alloy 268 .058-.062 dia.x5/32 length cadmium overall | 51861 |
| |
| Rapid | NY | Semi-Tubular Rivet | Aluminum | Plain | oval head 5056-h32 alum. semi-tubular .188x7/16 plain finish | 8910 |
| |
| Rapid | NY | Solid Rivet | Aluminum | Plain | 1/16 x 13/32 | universal head 7050-t73 aluminum i/a/w rev 2 1/16 x 13/32 gold chem film-mil-dtl-5541 MS20470E2-6-5 | 15.7638 |
|
| Rapid | NY | Solid Rivet | Steel | Cadmium | 416 | univ.head c1005-c1015 steel i/a/w rev 4 3/8 x 1-1/2 annealed cadmium qq-p-416 MS20613-12P24 | 94.506211764706 |
|
| Parker | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 3/8-16 x 3.0 | 3/8-16 x 3.0 socket head cap screw 1-1/2 thread 302 s/s passivate ff-s-86e w/patch mil-dtl-18240 NAS1352C6LB48 made in u.s.a. | 275 |
|
| Arden | WI | Set Screw (Socket Head) | Steel | Black Oxide | 3816 x 3/4 | 3816x3/4 hxsoc set cup blk | inquire |
|
| Arden | WI | Machine Screw | Steel | Plain | #8-32 x 3/16 | 832x3/16 phillips pn ms 50 | inquire |
|
| THRDFAST | AL | Hex Machine Bolt | Grade A | Galvanized | 7/8-9 x 12 | a307a h/b hdg b18.2.1 | 10 |
|
| THRDFAST | FL | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 1 1/2 x 1 x 1/4 | mounted flap wheel | 4 |
| ||
| THRDFAST | AL | Hex Head Cap Screw | Grade 5 | Plain | 3/8-16 x 8 1/2 | gr5 hex c/s b18.2.1 | 86 |
|
| THRDFAST | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/8-8 x 6 1/4 | a193 b7 a/t stud b18.2.1 b18.31.2 | 1 |
|
| Lightning | LA | Threaded Rod | Grade B7 | Plain | M20-2.50 x 2 | ft astm a193m b7 all thread rod | 1 |
|
| Lightning | LA | Heavy Hex Nut | Grade 7 | Plain | 1 1/4-8 | astm a194 gr. 7 heavy hex nut | 261 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain | M6-1.00 x 100 | socket c/s | 561 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Plain | 3/4-10 x 17 3/4 | 3/4-10x17-3/4 astm a320 l7 all thread stud | 501 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 7/8-8 x 16 | astm a193 b7 all thread stud | 759 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
