Buy End Mills from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 7/64 x 1/8 | 7/64x1/8 ca 2f reg s-cc-f | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/64 x 1/8 | 5/64x1/8 ca 2f reg s-ccfb | 1 |
| ||
Bostwick | IN | Milling Cutters (End Mills, Face Mills etc.) | 9/64 x 3/16 | 9/64 dia x 3/16 shank hss double end 2 flute cc end mill | 3 |
| ||
SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 4 flute single end carbide end mill | 7 |
| ||
All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 x 1 1/2 | 1/4 x 1/4 x 1 1/2 carbide end mill se 4fl | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 ca 6f reg ticn | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 1/4 x 1/4 x 3/8 3 | 1/4 x 1/4 x 3/8 3fl 21/2 oal alum | 65 |
| |
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 ca 4f xl tialn cc | 6 |
| ||
IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 x 3/4 | 1/4x1/4x3/4 general purpose centered 4-flute single end mill tiain coated(c430-.0.250-d3-s.0-z4) | 7 |
| ||
IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 15/64 x 1/4 x 3/4 | 15/64x1/4x3/4 carbide 4-flute square single end mill monster tool | 19 |
| ||
Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | flute sqr end solid carbide end mill 1/box | 14 |
| ||
THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | end mill double end 2 flute | 2 |
| ||
All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 x 3/8 end mill 2 flute | 3 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 15/64 x 3/8 | 15/64x3/8 hs 2f reg d-cc-f | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4x3/8 co 4f reg s-cc-f | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4x3/8 ca 4f reg d-cc-f | 3 |
| ||
IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 x 5/8 | 1/4x3/8x5/8 general purpose non-center 4-flute single end mill niagara cutter | 13 |
| ||
Hayes | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 x 3/8 dble end 4-flute end mill | 3 |
| ||
Bostwick | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 dia x 3/8 shank hss double end 3 flute cc end mill | 1 |
| ||
Bostwick | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 dia x 3/8 shank hss single end 3 flute cc end mill | 1 |
| ||
Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 5/8 x 1 5/8 | cobalt multi-flute roughing end mill 1/box | 2 |
| ||
Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 5 1/4 | roughing endmill# 714a148l | 3 |
| ||
Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 5 1/4 | s.e. 4 fl endmill# 525a148d | 3 |
| ||
All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 3 | 3/4 x 3/4 x 3 (6 long) carbide end mill se 4fl altin domestic | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 | 3/4 x 3/4 hss end mill multi flute | 7 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 | 3/4 x 3/4 hs 2 flute | 5 |
| ||
IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 1 1/2 | 3/4x3/4x1 1/2 carbide bright finish 4-flute centered single end mill yg-1 tool | 3 |
| ||
Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 2 1/2 | cobalt multi-flute roughing end mill 1/box | 3 |
| ||
Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 | h.s. 4 flute single end endmill 1/box | 3 |
| ||
Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 6 1/4 | h.s. 4 flute single end endmill 1/box | 3 |
| ||
Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3/4 x 1 5/8 | 3/4x3/4x1-5/8 cobalt 6 fl end mill 1/box | 4 |
| ||
IPC | VA | Milling Cutters (End Mills, Face Mills etc.) | 1 3/4 x 1 | 1-3/4x1 indexable end mill (tri-dex) | 2 |
| ||
MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 1/4 x 1 1/4 | 1 1/4 x 1 1/4 4 flute s/e c/c end mill | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 1 3/4 | cat40 ad/b end mill holder 3/4x1-3/4 | 1 |
| ||
Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 2 flute reg. length 45deg. helix carb.end mil | 1 |
| ||
Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 2fl crb end mill | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 9/64 x 2 | 9/64 ca 2f reg s-cc-f spect | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 2 | 3/4 ca 2f 1 loc 3 oal | 6 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 ca 2f reg de | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 543 x 20 | tnmg 543 g pt20c | 7 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f reg tin | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3 | 3/4 ca 3f 1-3/4 loc 4 oal sq | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 3/4loc zrn w/flat | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 45d helix yg | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 1-1/4 loc 3 oal zrn coated | 25 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 3/8 loc 2-1/2 oal | 65 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 1 loc zrn w/flat | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 3 | 3/4 ca 3f 2-1/2 loc 5 oal 30d helix coated | 2 |
| ||
Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 | 1/4 4 flute reg. length 30deg.helix carb.end mil | 5 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 7/64 x 4 | 7/64 ca 4f reg s-cc-f spect | 2 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 | 1/4 ca 4f reg rghr wf tin | 1 |
| ||
Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 | fl square carbide end mill 1/box | 2 |
| ||
Bostwick | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 x 1/4 | 1/4 dia x 4 x 1/4 shank hss (shxl-4-8) long reach 4 flute solid carbide end mill | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 4t3 x 7 | snmg 643a-4t s3x7 | 30 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 634 x 826 | spu 634 826 | 10 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 434 x 826 | sngn 434 826 | 30 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 431 x 826 | tpg 431 826 | 19 |
| ||
B & K FAST | PA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 end mill center cutting 2 flute | 11 |
| ||
B & K FAST | PA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 end mill center cutting 4 flute | 5 |
| ||
MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | end mill 2 flute 1/4 square | 2 |
| ||
MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | end mill 3 flute 1/4 square | 2 |
| ||
HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | de 4fl center cut endmill | 1 |
| ||
HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 1/4 | aluma endmill sq 3 flute single end | 1 |
| |
HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | flute de end mill 72214 72214 | 2 |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M14 | single end mill din 327ba hss xs | 2 |
|
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M4.5 | end mill din 327bm hss xs | 3 |
|
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M24 | end mill din 844m hss xs | 1 |
|
SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | single end 4fl sol carb end mill | - |
| ||
SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | sq end cen cut 2fl sol carb end mill | - |
| ||
MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 3/4 x 5/8 2 | -flute s/e c/c end mill | 4 |
| ||
MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 1/4 x 3/4 2 | -flute s/e c/c end mill | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 400 | cnmg 432a-4e nl400 | 9 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 400 | tnmg 432-4t nl400 | 10 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 400 | cnmg 643-4t nl 400 | 11 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 400 | cnmg 432a-4t nl400 | 8 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 400 | dnmg 433a 4t nl400 | 10 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 400 | wnmg 432a-4t nl400 | 12 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 432 | cnmg 432 ss ph6215 | 6 |
| |
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 542 | cnmg 542 ss ph 6920 | 6 |
| |
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 431 | cnmg 431 ss ph 5125 | 10 |
| |
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 644-5125 | cnmg 644-ph5125 | 10 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1 1/4 | 1-1/4 hs 2f reg | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/4 | wave mill indexable end mill 3/4 | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 hs 2f 3/8 shank | 5 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 45 | cobra e 1/4 ca 3f 45d | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 45 | cobra e 5/16 ca 2f reg 45d | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M42 | e 1x1x2x4-1/2 co 4f b m42 | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 45 | shell mill cutter 45d | 1 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 433 | tpu 433 6640 | 40 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 222-46 | tpmr 222-46 6640 | 300 |
| ||
QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 45 | tpgx 321-fl s45 | 16 |
| ||
HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 4 | oz. cutting fluid [tap magic] | 18 |
| |
HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | dia ball end end mill, 2 fl. cc | 1 |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M4 | 4mm end mill din 327bm hss xs | 1 |
|
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M4.5 | m4.5mm single end mill din 327ba hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M14.5 | m14.5mm single end mill din 327ba hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M4 | m4mm single end mill din 327ba | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M40 | m40mm single end mill din 327ba hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M24 | m24mm single end mill din 327ba hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M45 | m45mm single end mill din 327ba hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M14 | m14mm single end mill din 327ba | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M4.5 | m4.5mm 2 flute end mill din 327bc | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M4 | m4mm 2 flute end mill din 327bc | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M14 | m14mm 2 flute end mill din 327bc | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M4 | m4mm end mill din 8c | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M4.5 | m4.5mm end mill din 844m hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M14 | m14mm end mill din 844m hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M14 | m14mm end mill din 844m | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M24 | m24mm end mill din 327bm hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M34 | m34mm end mill din 327bm hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M14 | m14mm end mill din 327bm | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M40 | m40mm end mill din 327bm hss | inquire |
| ||
MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | M45 | m45mm end mill din 327bm hss | inquire |
| ||
MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 4 | flt end mill 29/6x1/2 | 2 |
| ||
MSTC | MA | Milling Cutters (End Mills, Face Mills etc.) | M4 | 4 mm cntr ctng r/h dbl end endmill cob | 1 |
| ||
MSTC | MA | Milling Cutters (End Mills, Face Mills etc.) | M4 | 4 mm r/h sngle end 4 flute endmill hss | 1 |
| ||
MSTC | MA | Milling Cutters (End Mills, Face Mills etc.) | 1.4 | 1.4 mm hss ctr ctng end mill-3/16 shank | 2 |
| ||
MSTC | MA | Milling Cutters (End Mills, Face Mills etc.) | M4 | 4 mm ctr ctng-r/h-sngl end-2 flute-end mill | 5 |
| ||
THRDFAST | MS | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | double end mill | 12 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.