FCH Member Advertisement
FCH News
| Buy End Mills from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/8 x 1/8 | 1/8x1/8 hs 2f reg d-cc-f | 6 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3/16 x 3/8 | 3/16 x 3/16 x 3/8 x 2 ca 3f zrn | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3/16 | 3/16x3/16 ca 4f reg s-cc-f | 1 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 4 flute single end carbide end mill | 7 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 x 1 1/2 | 1/4 x 1/4 x 1 1/2 carbide end mill se 4fl | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 ca 6f reg ticn | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 1/4 x 1/4 x 3/8 3 | 1/4 x 1/4 x 3/8 3fl 21/2 oal alum | 65 |
| |
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 1/4 | 1/4x1/4 ca 4f xl tialn cc | 6 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 5/16 | 5/16x5/16 ca 4f s-cc-f spect | 4 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 5/16 | 5/16x5/16 ca 3f reg s-cc-f | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 5/16 | 5/16x5/16 ca 4f reg s-cc-f | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 5/16 | 5/16x5/16 ca 4f reg tialn cc | 5 |
| ||
| THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | end mill double end 2 flute | 2 |
| ||
| THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 3/8 | double end mill 2 flute | 2 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 13/32 x 3/8 | 13/32 x 3/8 2 flute end mill | 1 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4 x 3/8 end mill 2 flute | 3 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3/8 | 3/16 x 3/8 end mill 2 flute | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 15/64 x 3/8 | 15/64x3/8 hs 2f reg d-cc-f | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3/8 | 3/16x3/8 hs 4f reg d-nc-f | 21 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 3/8 | 5/16x3/8 co 4f reg d-cc-f | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4x3/8 co 4f reg s-cc-f | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3/8 | 1/4x3/8 ca 4f reg d-cc-f | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 11/32 x 3/8 | 11/32x3/8 ca 2f reg s-cc-f | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 7/16 x 7/16 | 7/16x7/16 ca 4f reg tialn cc | 1 |
| ||
| SII | IN | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 | 1/2x1/2 4 flute single end carbide end mill | 3 |
| ||
| THRDFAST | OK | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 | end mill double end 2 flute | 1 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 x 1 1/4 | cobalt multi-flute roughing end mill 1/box | 2 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 | 1/2 x 1/2 end mill 2 flute | 3 |
| ||
| All Size | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 | 1/2 x 1/2 cobalt rougher end mill altin coated se 4fl | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 9/16 x 1/2 | 9/16x1/2 co 4f reg s-rougher/finisher | 6 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1/2 | 1/2 x1/2 cob 3f reg s-cc-rhh | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 1/2 | 5/16x1/2 ca 2f stb d-cc-f | 3 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 x 3/4 x 4 1/4 | cobalt 5 flute roughing endmill 1/box | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 11/16 x 3/4 | 11/16x3/4 ca 2f reg s-cc-f | 1 |
| ||
| Mansco | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 x 1 x 3 | cobalt multi-flute end mill 1/box | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1 x 3 4 | 1/2 x 1 x 3 ca 4f altin coated | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 1 x 1/2 | spotting drill 1/2x1x1/2x4 | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 11 x 16 x 5/8 | 11x16x5/8 hs 2f reg s | 2 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/8 x 2 | 1/8 2-flt reg lgth sq-end 30 deg helix end mil | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 2 flute reg. length 45deg. helix carb.end mil | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 2 | 1/2 2 flute long length 45deg. helix s.e. carb.end mil | 1 |
| ||
| Endries | WI | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 2fl crb end mill | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 2 | 5/16 ca 2f reg. | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 2 | 1/2 ca 2f 40d hh zin coated | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 2 | 1/2 ca 2f 1-1/2 loc 4 oal zrn | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 2 | 1/2 ca 2f reg ticn w/weldon | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 2 | 1/2 ca 2f reg uncoated bm | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/32 x 2 | 1/32 ca 2f reg | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 2 | 1/2 ca 2f stb | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 2 | 1/4 ca 2f reg de | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | .2515 x 2 | d .2515 ca 2f 118deg pnt | 1 |
| ||
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | 1/2-13 x 2 | double end mill stud | 100 |
| ||
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Zinc/Clear | 1/2-13 x 2 | double end mill stud stud | 20 |
|
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1 x 20 | cnmg 643-r1 pt20c | 10 |
| ||
| METRO IND | OH | Milling Cutters (End Mills, Face Mills etc.) | 1/8 x 2 1/4 | center-cut 2-flute single end rh end mill solid carbide | 1 |
| ||
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | 5/8-11 x 2 1/4 | double end mill stud stud | 100 |
|
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Zinc/Clear | 5/8-11 x 2 1/4 | double end mill stud stud | 100 |
|
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/2-13 x 2 1/4 | double end mill stud 18-8 304 | 10 |
| |
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 3 | 1/2 ca 3f 45d 4 oal tialn | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f reg tin | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/8 x 3 | 1/8 ca 3f reg tin s-cc-f | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 3 | 3/16 ca 3f reg tin s-cc-f | 4 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 3/4loc zrn w/flat | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 3 | 1/2 ca 3f 45d stub alu power | 7 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 45d helix yg | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 3 | 1/2 ca 3f 45d reg alu ticn | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/8 x 3 | 1/8 ca 3f alu-power | 3 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 1-1/4 loc 3 oal zrn coated | 25 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 3/8 loc 2-1/2 oal | 65 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 x 3 | 5/16 ca 3f 1-1/4 loc zrn reg 3-1/2oal (bm) | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 3 | 1/4 ca 3f 1 loc zrn w/flat | 1 |
| ||
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | 3/8-16 x 3 | double end mill stud stud | 300 |
|
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Zinc/Clear | 5/8-11 x 3 1/2 | double end mill stud stud | 68 |
|
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/8 x 4 | 1/8 4 flute reg. length 30deg.helix carb.end mil | 7 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/16 x 4 | 3/16 4 flute reg. length 30deg.helix carb.end mil | 6 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 | 1/4 4 flute reg. length 30deg.helix carb.end mil | 5 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 4 | 1/2 4 flute reg. length 30deg.helix carb.end mil | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1 x 4 | 1 4 flute rougher 30 deg carbide end mil uncoat | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 4 | 1/2 ca 4f reg bn 30deg altin | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 x 4 | 1/2 ca 4f reg uncoated with .030 corner radius | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 x 4 | 1/4 ca 4f reg rghr wf tin | 1 |
| ||
| Liberty | IL | Milling Cutters (End Mills, Face Mills etc.) | 5/8-11 x 6 | double end mill stud stud | 12 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 431 x 826 | tpg 431 826 | 19 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 3/16 | 3/16 2-flt reg lgth sq-end 30 deg helix end mill | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/16 | 1/16 4 flute reg. length 30deg.helix carb.end mil | 3 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/8 | 1/8 2 flute reg. length 45deg. helix carb.end mil | 1 |
| ||
| Ababa | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/8 | 1/8 2 flute long length 45deg. helix carb.end mil | 1 |
| ||
| B & K FAST | PA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 end mill center cutting 2 flute | 11 |
| ||
| B & K FAST | PA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 end mill center cutting 4 flute | 5 |
| ||
| TownCountry | AR | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | hss 2-flute end mill single end shank | 1 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | end mill 2 flute 1/4 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/8 | end mill 2 flute 1/8 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | end mill 3 flute 1/2 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | end mill 3 flute 1/4 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/8 | end mill 3 flute 1/8 square | 2 |
| ||
| MAINSOURC | NH | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | end mill 2 flute 1/2 square | 1 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | de 4fl center cut endmill | 1 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | de 4 fl center cut endmill | 1 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1-2 | 1 - 2 flute se end mill cc | 1 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 7/16 | aluma endmill sq 3 flute single end | 1 |
| |
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/16 | flute se end sq endmill 3/4 shk. 50000 50000 | 2 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 1/4 | aluma endmill sq 3 flute single end | 1 |
| |
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 5/16 | aluma endmill sq 3 flute single end | 1 |
| |
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | flute de end mill 72214 72214 | 2 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | Aluminum | 1/2 | aluma endmill sq 3 flute single end | 1 |
| |
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M14 | single end mill din 327ba hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M13 | single end mill din 327ba hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M15 | single end mill din 327ba hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M10 | end mill din 327bm hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M10.5 | end mill din 327bm hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M12 | end mill din 844m hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M10 | single end mill din 327ba hss xs | 4 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M13.5 | single end mill din 327ba hss xs | 1 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M21 | single end mill din 327ba hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M12 | end mill hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M13 | end mill din 327bm hss xs | 2 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M16 | end mill hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M17 | end mill hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M15 | end mill hss xs | inquire |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M16 | end mill din 844m hss xs | 4 |
|
| MMCC | IL | Milling Cutters (End Mills, Face Mills etc.) | Steel | Plain | M18 | end mill din 844m hss xs | 1 |
|
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 5/16 | cen cut dbl end 2fl m42 end mill | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | single end 4fl sol carb end mill | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | sq end cen cut 2fl sol carb end mill | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 11/32 | sq end cen cut 2fl sol carb end mi | - |
| ||
| SRF | AL | Milling Cutters (End Mills, Face Mills etc.) | 3/16 | cen cut dbl end 4fl m42 end mill | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 1/4 x 3/4 2 | -flute s/e c/c end mill | 1 |
| ||
| MidStates | MI | Milling Cutters (End Mills, Face Mills etc.) | 1 1/2 x 3/4 2 | -flute s/e c/c end mill | 1 |
| ||
| MESAFAST | CA | Milling Cutters (End Mills, Face Mills etc.) | Steel | 5/16 4-flute finishing end mill 1-5/8 cut 4 overall lgth-solid carbide | 4 overall lgth-solid carbide | 4 overall lgt h-solid carbide | 4 overall lgth-solid carbide | 2.0 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | 1/2 series 1360 accelerator mill 6 oal 3 loc 4 flutel tialn | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 431 | cnmg 431 ss ph 5125 | 10 |
| |
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 644-5125 | cnmg 644-ph5125 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1 1/4 | 1-1/4 hs 2f reg | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 721 | dnmg 432-rb 721 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1 | 1 co 3f reg rghr | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | 1/2 co 2f reg 3/8 shank | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | 1/4 hs 2f 3/8 shank | 5 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 5/16 | cobra b sd-2 single cut 5/16 | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 12-3 | s-sclcr 12-3 | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M8016 | apkx 1505 pder-m 8016 | 1 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 10 | spu 422 h10 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 10 | ccmt 32.51-47 h10 | 104 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 100-3 | segr 100-3 | 2 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M6251 | dnmg 432-dm 6251 | 7 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 10 | tnmg 333-dm h10 | 10 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M6610 | cnmg 642-m 6610 | 17 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 100-5 | segr 100-5 | 11 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 10 | seew 1204 (43) affn h10 | 30 |
| ||
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | M6610 | wnmg 332-m 6610 | 20 |
| ||
| ZAL INDUS | CA | Milling Cutters (End Mills, Face Mills etc.) | 5/16 | 5/16 hss double end mill | 4 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/2 | ball end end mill, 2 fl, cc | 1 |
| ||
| HBBOLT | CA | Milling Cutters (End Mills, Face Mills etc.) | 1/4 | dia ball end end mill, 2 fl. cc | 1 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
