Machine Bushings , Plastic
Machine Bushings are not fasteners, and are specially designed washers used to bear load and provide accurate spacing on shafts. They reduce wear between moving parts and ensure accurate spacing on any type of rod or shaft. Machinery bushings are most commonly supplied in low carbon steel and can be plated for maximum corrosion resistance.
41 results, (click on any line for more information)
Buy Machine Bushings from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
Bossard | AZ | Machine Bushings | Plastic | Plain | bushing white pvc .340 id southco | 500 |
| |
NAPPCO | TX | Machine Bushings | Plastic | Plain | bushingfitting 1-1/2x3/4 pvc | 40 |
| |
NAPPCO | TX | Machine Bushings | Plastic | Plain | bushingfitting 1-1/2x1/2 pvc | 10 |
| |
Century | FL | Machine Bushings | Plastic | Plain | 1 | 1 plastic bushing grey rohs compliant (MUST BE STAMPED: ULSIZECSA105DEGMM) (MUST BE STAMPED: UL SIZE CSA 105DEG MM) | 997 |
|
Century | FL | Machine Bushings | Plastic | Plain | 1 1/2 | 1 1/2 plastic bushing grey rohs complia (MUST BE STAMPED: ULSIZECSA105DEGMM) (MUST BE STAMPED: UL SIZE CSA 105DEG MM) | 3878 |
|
NAPPCO | TX | Machine Bushings | Plastic | Plain | 1 1/4 | 1-1/4 thread bushing (105d plastic ins) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) (375-ELEC & CONNECTOR HARDWARE) | 560 |
|
Endries | WI | Machine Bushings | Plastic | Plain | 43 | 437-247 2x1/2 schedule 40 pvc spigotxsoc reducing bushing | 10 |
|
Endries | WI | Machine Bushings | Plastic | Plain | 43 | 437-418 4x1-1/4 schedule 40 pvc reducing bushing spgxsoc | 10 |
|
Mansco | MI | Machine Bushings | Plastic | Plain | 1/2 x 19/32 x 1/4 | 1/2 x 19/32 x 1/4 long x 7/8 flange od plastic bushing (rfi-0809-04) | 2000 |
|
Mansco | MI | Machine Bushings | Plastic | Plain | .313 x .188 flange bushing plastic | 2000 |
| |
Mansco | MI | Machine Bushings | Plastic | Plain | 1/2x5/8x1 long plastic sleeve bushing (msi-0810-16) | 2000 |
| |
Century | NY | Machine Bushings | Plastic | Plain | 1 1/4in plastic bushing grey rohs comp must be stamped ulvsize csa 105deg mm per drawing rev 4 | 148 |
| |
Century | NY | Machine Bushings | Plastic | Plain | 1in plastic bushing grey rohs compliant must be stamped ul size csa 105deg mm | 697 |
| |
Century | NY | Machine Bushings | Plastic | Plain | microplastics 22mp08708 micro plastics 22mp08708 | 2000 |
| |
Century | NY | Machine Bushings | Plastic | Plain | 1 1/4in plastic bushing grey rohs comp must be stamped ulvsize csa 105deg mm per drawing rev 4 | 148 |
| |
Century | NY | Machine Bushings | Plastic | Plain | 1 1/2in plastic bushing grey rohs comp must be stamped ul size csa 105deg mm | 3747 |
| |
Liberty | IL | Machine Bushings | Plastic | Plain | sb-1093-15 black plastic bushing bushing | 200 |
| |
RCFast | AZ | Machine Bushings | Plastic | Plain | thomas & betts (bushing, knock out, 1/2, thermoplastic) 3210 | 500 |
| |
Global | CA | Machine Bushings | Plastic | Plain | 228 | t & b plastic insulating bushing 3.375 odx0.625 h | 2 |
|
Global | CA | Machine Bushings | Plastic | Plain | 812-625 | 22mp08110 microplastics bushing ny 812-625 | 216 |
|
Exim | S'pore | Machine Bushings | Plastic | Plain | bushinglead nylon black [rohs]microplastics p/n 22mp01020 | 389 |
| |
Exim | S'pore | Machine Bushings | Plastic | Plain | 0.937 x 1.359 x 0.453 | bushing insulating nylon black snap0.937 x 1.359 x 0.453 inmicroplastic p/n 22mp12515 | 260 |
|
IPC | VA | Machine Bushings | Plastic | Plain | 1 1/2 x 1 | 1 1/2x1 pvc schedule 40 spigotxslip bushing | 200 |
|
B & K FAST | PA | Machine Bushings | Plastic | Plain | 1 x 1/2 | 1 x 1/2 pvc hex slip bushing | 6 |
|
QFC | TX | Machine Bushings | Plastic | Plain | 40 | pvc bushing 0.75 x 2.0-sch40 | 10 |
|
QFC | TX | Machine Bushings | Plastic | Plain | 40 | pvc bushing 75 x 0.5 thr-sch40 | 10 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 3/4 | 3/4 anti-short bushings@flex.ac.mc(thermoplastic) | 600 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 2 x 105 | 2 105deg.plastic bushing arl#445 75220b tpz#836 | 695 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | nylon flange bushing clear plastic shutter pin | 5,000 |
| |
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 3 x 105 | 3 105deg.c plastic bushings(arl#447) 75230b | 237 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 1/2 x 105 | 1/2 105deg.c plastic bushings 75205b | 2,000 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 3 1/2 x 105 | 3-1/2 105deg.c plastic bushings(arlington#448) | 130 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 1/2 | 1/2 plastic bushing (arlington#440) | 1,025 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 1/2 | 1/2 plastic insulating bushings for rigid.imc | 870 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 4 x 105 | 4 105deg.plastic bushing arl#449 tpz#840 | 30 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 1/2 | 1/2 plastic insulating bushing | 400 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 1 1/2 | 1-1/2 pvc bushing sch.80 | 6 |
|
ZAL INDUS | CA | Machine Bushings | Plastic | Plain | 1 1/4 x 105 | 1-1/4 105deg.plastic bushings(arlin#443)tpz#834 | 106 |
|
SIS | AZ | Machine Bushings | Plastic | Plain | 3/4 | plastic insulated bushing | 1000 |
|
WSB | KY | Machine Bushings | Plastic | Plain | bushing delrin 17505281c pla | 4,707 |
| |
Wurth | IN | Machine Bushings | Plastic | Plain | igus-bushing-plastic-xfm-10-12-06 | 1,645 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.