FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| NAPPCO | TX | Metal Drill Bits | Plastic | Plain | 1/4 | 1/4 hs 60 drill bit for plastics acrylics | 24 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1-14 x 3 1/2 | 1-14 x 3-1/2 yellow zinc finish sae j429 grade 8 hex cap screw | 6 |
|
| OneMonroe | MN | Hex Tap Bolt (Fully Threaded) | Grade 8 | Zinc/Yellow | 3/8-24 x 2 1/4 | 3/8-24 x 2 1/4 tap bolt gr 8 yellow | 300 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | M100 | caster swivel-plate wheel size 75 mm x 25 mm wheel mat grey rubber on steel non-marking bearing cone ball w/total lock brake top plate size 40 mm x 60 mm load ht 100 mm load cap 180 lbs temp rt-4 to +185 f | 8 |
| |
| OneMonroe | MN | Button Head Socket Cap Screw | Steel | Plain | 5/16-18 x 2 1/4 | 5/16-18 x 2 1/4 button soc cap screw | 160 |
|
| OneMonroe | MN | Wedge Stud Anchor | Steel | Plain | 1/4-20 x 2 1/4 | 1/4-20 x 2-1/4 steel wedge anchor | 70 |
|
| OneMonroe | MN | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 | 3/8 nf hex jam nut ss | 39 |
|
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 3/8-16 x 5/8 | 3/8-16 x 5/8 shc 594-b yel-dyk | 2 |
|
| OneMonroe | MN | Socket Head Cap Screw | Grade 8 | Plain | 1/4-20 x 5/8 | 1/4-20 x 5/8 hex flange scs grade 8 | 84 |
|
| OneMonroe | MN | Curved/Wave Spring Washer | Plain | seastrom wave spring washer | 70 |
| ||
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 7/8 x 5 | 7/8 x 5 shc | 1 |
|
| OneMonroe | MN | Flat Washer | Nylon (Polyamide) | Plain | 1.012 x 1.5 x .08 | 1.5 od x 1.012 id x .08 thk nylon flat washer | 3636 |
|
| OneMonroe | MN | Fender Washer | Plain | 1/2 x 1 1/2 | 1/2 x 1 1/2 fender washer | 1600 |
| |
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8-18 x 1 1/2 | 8-18x1-1/2 phillips flat hd ty ab stl hard & zinc hds painted silver | 15000 |
|
| OneMonroe | MN | Carriage Bolt | Grade 5 | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 gr.5 carr bolt-zp | 2450 |
|
| OneMonroe | MN | Cushioned Pipe & Tube Loop Clamp | ms21919wde4 | 5 |
| |||
| OneMonroe | MN | Lock Nut, Flange, w/o serrations | Steel | Zinc/Clear | M8-1.25 | m8-1.25 all metal flange lock nut-zp din 6927 | 280 |
|
| OneMonroe | MN | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M12-1.75 x 40 | m12 x 1.75 x 40 full thread hhc/s 10.9-zp | 40 |
|
| OneMonroe | MN | Self-Tapping Thread Rolling Screw | Plain | #8-18 x 1/2 | 8-18 x 1/2 self drill sf yell | 130000 |
| |
| OneMonroe | MN | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Plain | #10-24 | 10-24 type-u nut (.100-.125 panel range) | 100 |
| |
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | 3/8 x 3/4 | 3/8 x 3/4 phillips zp | 189 |
|
| Century | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | m 1.6 x 4 mm socket cap screw a4 stainless steel din 912 | 76 |
| |
| Century | FL | Hoses | aircrast spruce 6000-4 hose | 9 |
| |||
| Century | FL | fender flare i-sheet i311-314 | 235 |
| ||||
| Century | FL | Protective Caps & Plugs | mocap cp.41/.48rd1 | 79 |
| |||
| Century | FL | Flat Washer | Teflon (PTFE) | Plain | seastrom 5612-124-5 flat washer teflon | 160 |
| |
| Century | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6 x 1/2 | #6 x 1/2 ind hex hd ty ab sms steel zinc plt | 12073 |
|
| Century | FL | Sems Machine Screw | Steel | Zinc/Clear | M5-0.80 x 14 | m5-0.80 x 14mm sems phillips pan double zinc e2a | 4604 |
|
| Century | FL | Machine Screw | Steel | Black Oxide | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 phillips truss hd-ms steel black ox q2a | 175 |
|
| Century | FL | Electrical Lugs & Terminals | kobiconn # 159-1614 insulated butt connector | 507 |
| |||
| Century | FL | Flat Washer | ms14183l-7 | 1925 |
| |||
| Century | FL | Springs (Extension) | us army 12283313 washer spring tension | 1961 |
| |||
| Century | FL | Lock Nut, Nylon Insert | Brass | Plain | #10-32 | esna 9nm-02 10-32 nylon insert locknut brass | 1000 |
|
| Century | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M6.3 x 20 | m6.3 x 20mm self tap screw stl dacromet # kt13772 | 674 |
|
| Century | FL | pem s-m2.5-2 s-m2.5-2 | 3687 |
| ||||
| Century | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 0.344 x 0.75 x 0.050 | 5/16 commercial fw 316 s/s 0.344 x 0.75 x 0.050 | 1350 |
|
| NBS | IL | Dowel Pin | Steel | Plain | M4 x 5 | M4x5 dowel pin-alloy-bright finish (taiwan) [m6 spec] din 6325 | 25000 |
|
| NBS | IL | 12 Point Flange Screw (CounterBore) | null | Plain | 5/8-18 x 2 1/2 | 5/8-18 x 2-1/2 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| Alma Bolt | MI | Machine Screw | Plain | #8-32 x 1/4 | #8-32 x 1/4 fillister hd slotted m/s | 9884 |
| |
| Alma Bolt | MI | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Zinc/Yellow | 3/4-10 x 4 | 3/4-10 x 4 yellow zinc b7 alloy heavy hex bolt | 34 |
|
| QCS | OR | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 3/16 | 2-56x3/16 phil flat 100 m/s stainless | 373 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 5 | Plain | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 grade 5 hex head cap screw | 40951 |
|
| Alma Bolt | MI | Machine Screw | Plain | M10-1.50 x 16 | m10 x 1.5 x 16 pan phillips machine screw din 7985 | 190 |
| |
| Alma Bolt | MI | Dowel Pin | ASTM A574 | Plain | 5/32 x 1 1/2 | 5/32 x 1 1/2 alloy dowel pin | 97 |
|
| Alma Bolt | MI | Flange Screw w/o serr. (Frame Bolt) | Class 8.8 | Plain | M8-1.25 x 50 | m8 x 1.25 x 50 flange bolt 8.8 plain din 6921 | 392 |
|
| CIF | IL | Hex Tap Bolt (Fully Threaded) | Steel | Galvanized | 3/4-10 x 3 | (1) 3/4-10 x 3 ft a325 hhb hdg (1) 3/4 f436 dti flat washer galv (1) 3/4 f436 flat washer hdg (1) 3/4-10 anco lock nut hdg | 2190 |
|
| CIF | IL | Hex Head Cap Screw | Class 10.9 | Plain | M30-3.50 x 155 | m30 x 3.5 x 155 hex cap screw 10.9 plain | 590 |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2-0.40 x 16 | button socket head cap screw a2 m2-.40 x 16 iso 7380 | 51000 |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3 | 5/16-18 x 3 button soc cs ss | 20 |
|
| Brikksen | FL | Lag Screw | Galvanized | 1/2 x 6 | 1/2 x 6 hex lag bolt hdg-25 pcs. | inquire |
| |
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #8 x 3/4 | #8 x 3/4 hex washer head tek screw 410 ss 100 per small bag 5 small bags per master pack-generic brand | 5000 |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | 1/4-20 x 1/2 | 1/4-20 x 1/2 flat skt cs 316s/s | 500 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 1/2-13 x 2 3/4 | 1/2-13 x 2 3/4 hx hd c/s ft 316 ss f593g | inquire |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 3 | 5/8-11 x 3 carriage bolt ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 | 1/4-20 x 1 slottedround m/s ss | 5000 |
|
| Brikksen | FL | Machine Screw | Silicon Bronze | Plain | 5/16-18 x 1 | 5/16-18 x 1 slotted flat head m/s silicon bronze 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 | 1/2-13 nylon insert ln ss/waxed | 80000 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 12 | m8-1.25 x 12 socket head cap screw 18-8 ss 25 per small bag 5 small bags per master pack-generic brand din 912 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 1 1/4 | #14 x 1-1/4 phillips ovalal head sms type-a 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 9/16-12 x 6 | 9/16-12 x 6 full thread rod s/s | 20 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 2 | 10 x 2 1/4 phillips ovalal type-a ss/chrome- | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 0.578 x 1.062 x 0.062 | 9/16 flat washer 960c916 18-8 ss 0.578 id x 1.062 od x 0.062 thk 25 per bag generic brand | inquire |
|
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 | 3/8-24 hex nut 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 2 1/2 | #14 x 2-1/2 square drive pan head sms type-a 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 7/8 | 10-24 x 7/8 indented hex ms ss | inquire |
|
| Brikksen | FL | Flat Washer | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 | 5/16 epdm f/w 11/16 od | 19000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 60 | m8-1.25 x 60 phillips flat head m/s 18-8 ss 10 per small bag 5 small bags per master pack-generic brand din 965 | inquire |
|
| Marshall | MI | Wedge Stud Anchor | Steel | Zinc/Clear | 3/8-16 x 3 3/4 | 3/8-16x3-3/4 wedge anchor z | 4 |
|
| Brikksen | FL | Deck Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 x 2 1/2 | 6 x 2-1/2 square flat deck screw type-17 305ss with 4 nibs | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 18 | 3/4-10 x 18 hex head cs ss with 6 thread f593d | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3 | 3/8-16 x 3 phillips flat m/s ss/flat | 600 |
|
| Brikksen | FL | Cotter Pin (Split Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/32 x 3 | 5/32 x 3 cotter pin ss | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10 x 3/4 | 10 x 3/4 phillips flat tek 410ss #3 point | 1000 |
|
| Brikksen | FL | Machine Screw Washer | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 | 5/16 flat washer 1 1/2 od epdm/ss | inquire |
|
| Brikksen | FL | Split Lock Washer | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1/2 | 1/2 medium lock washer steel/zinc/blue xylan 349010 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5-0.45 x 16 | phillips flat head machine screw a2 ph m2.5-.45 x 16 din 965 | 1000 |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | 10-32 x 3/8 button soc cs ss/nylon patch | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3.5-0.60 x 10 | slotted cheese head machine screw a2 m3.5-.60 x 10 din 84 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 1/4 | 1/4-20 x 2-1/4 phillips pan m/s ss/chrome- | 100 |
|
| Brikksen | FL | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1 1/2 | 1/2-13 x 1-1/2 hex flange bolt 18-8ss w/serrations | inquire |
|
| Brikksen | FL | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 x 40 | spring pin a2 m5 x 40 din 1481 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2-0.40 x 10 | phillips flat head machine screw a2 ph m2-.40 x 10 din 965 | 10000 |
|
| Brikksen | FL | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 | 1/2-13 cap (acorn) nut 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| SWACO | OH | Carriage Bolt | Grade A | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20x1 1/4 crg bolt a307 gr a zn | 2500 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | #10 | p1185-01cn146 heli-coil insert 10 per pack | 3 |
| |
| SWACO | OH | Threaded Rod | Grade B7 | Plain | 1/4-28 x 3 | 1/4-28 x 3 threaded rod b7 | 8 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 3585-06cnw276 heli-coil insert | 1885 |
| ||
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | #5 | p3585-7cn656 heli-coil 5 per pack | 141 |
| |
| SWACO | OH | Self-Clinching Standoff | Plain | 5 | p-bso-032-28zi spec pem standoff 5 pkg | 33 |
| |
| SWACO | OH | 07003-00333 lip seal | 1 |
| ||||
| GLF | OH | Hex Head Cap Screw | Class 8.8 | Plain | M8-1.25 x 60 | m8-1.25 x 60 hhcs cl 8.8 stl pln din 933 | 95 |
|
| GLF | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 1/2 | 3/8-16 x 2-1/2 shcs 18-8 s/s | 315 |
|
| GLF | OH | Slotted Spring Pin (Roll Pin) | Steel | Plain | 1/8 x 1 | 1/8 x 1 spring pin stl pln | 400 |
|
| GLF | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/8-24 x 1 | 3/8-24 x 1 hhcs gr 5 stl zc | 461 |
|
| Bossard | AZ | Solid Rivet | Aluminum | Plain | rivet ms20426ad4-4 | 8695 |
| |
| Optimas | IL | Machine Screw | Nylon (Polyamide) | Plain | #6-32 x 1/4 | 6-32 x 1/4 slotted pan machine screw nylon tmpi quick clean | 42 |
|
| American | WI | Coupling Nut | Grade 2 | Plain | 1 1/4-7 x 1 5/8 x 3 | 1-1/4-7x3 nc hex coupling nut gr 2 plain | 25 |
|
| American | WI | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 4 1/2 | 5/16-18x4-1/2 nc carriage bolt #18-8 ss | 709 |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Zinc/Green | sheet metal speed nut tinnerman nut (f/j/u) steel zinc/green 1/4-20 type-u speed nut range .070-.140 cte. .718 dcs-907-od | inquire |
| |
| AFT Faste | TX | Battery Packs | Class 4.8 | bosch tool corporation minimite1/2 4.8 vdc battery pack 1/ea | 4 |
| ||
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Plain | hex head cap screw class 8.8 plain | 3 |
| |
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M6-1.00 x 14 | hex head cap screw full thread a4 m6-1.0 x 14 din 933 | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 3 | socket set screw cup point-1000 per bag a2 m3-.50 x 3 din 916 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 1/4 | 8 x 1-1/4 phillips flat a ss/bo | inquire |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 flat socket cap screw 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3 1/2 | 10-32 x 3-1/2 phillips flat m/s ss | 2000 |
|
| FasSpcMfg | FL | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | #8-32 x 3/4 | 8-32 x 3/4 flat head socket cap 316b stainless strain hardened | 4 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 2 | 1/2-13 x 2 socket cap 304l stainless full thread | 11 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 2 | 3/8-16 x 2 socket cap 316l stainless | 12 |
|
| NutsBolts | NE | Bonded EPDM Sealing Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 ss neoprene bonded | 450 |
|
| OneMonroe | MA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .380 x .875 x .075 | .380id x .875od x .075thk s.s. f/w stainless flat washer | 70 |
|
| OneMonroe | MA | Carriage Bolt | Steel | Zinc/Clear | #10-24 x 1/2 | 10-24 x 1/2 carriage bolt steel/zinc | 4250 |
|
| Empire | WA | Wood Drill Bits | 1/4 | 1/4 hole saw pilot drill | 24 |
| ||
| Empire | WA | Socket Head Cap Screw | Steel | Plain | 5/16-18 x 2 | 5/16-18 x 2 socket hd c/s | 100 |
|
| Field Fas | IL | U-Bolt | Grade A36 | Plain | 1/2-13 x 2 1/2 | 1/2-13 x 2 1/2 u-bolt a36 stl pln | 10 |
|
| Field Fas | IL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 1 1/2 | 3/4-10 x 1 1/2 hex cap 316 ss | 82 |
|
| Field Fas | IL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain | 5/8-11 x 5 1/4 | 5/8-11 x 5 1/4 heavy hex bolt astm a193 b7 pln | 8 |
|
| Field Fas | IL | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 31/32 | 3/8 x 31/32 flat hd solid rivet 302ss stress relief 500f for 3 hours | 690 |
|
| Irwin Ind | Ont | heyco 1281 rsr 875 white | 3000 |
| ||||
| Raw Produ | NJ | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | Silicon Bronze | Galvanized | #12 x 1 1/2 | regrip mechanical galvanized roofing screws-bronze-#12 x 1-1/2 | 500 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 4 | phillips pan head ms 304 ss #10-24 x 4 | 41 |
|
| Raw Produ | NJ | Blind Rivet | Aluminum | Plain | 6-4 (.188-.250) | pop rivet closed end aluminum/steel 6-4 trx114897 | 500 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 40 | metric socket cap screws a2 ss m8 x 1.25 x 40m pt | 136 |
|
| Raw Produ | NJ | Machine Screw | Silicon Bronze | Plain | 1/4-20 x 1 3/4 | slotted flat head ms silicon bronze 1/4-20 x 1-3/4 | 69 |
|
| Raw Produ | NJ | Socket Head Cap Screw | Class 12.9 | Zinc/Clear | M8-1.25 x 25 | socket cap screws 12.9 coarse iso 4762 / zinc-bake cr+3 m8-1.25x25 mm(ft) din 912 | 1230 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #12-14 x 3/4 | phillips flat head self drill 410 ss #12-14 x 3/4 | 2014 |
|
| Raw Produ | NJ | Weld Nut | Steel | Plain | spot weld nuts double tab-1/4-20 xl | 500 |
| |
| Raw Produ | NJ | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | torx pan head ms 304 ss #8-32 x 5/16-t20 drive no pin | 9340 |
| |
| Raw Produ | NJ | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain | #6-32 x 1/4 | socket set screw 316 ss #6-32 x 1/4 | 844 |
|
| Raw Produ | NJ | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 1/4 | carriage bolts 304 ss #10-32 x 1-1/4 | 1169 |
|
| Raw Produ | NJ | Sems Machine Screw | Steel | Zinc/Clear | #6-32 x 3/4 | phillips pan head sems screw with external tooth lock washer zinc #6-32 x 3/4 | 3623 |
|
| AEROSPCE | MN | Electrical Lugs & Terminals | 12-10 | pv10-10rx-d panduit ring terminal 12-10 awg #10 | 700 |
| ||
| AEROSPCE | MN | Round Female/Female Standoff | Steel | Plain | ykfe-50350-43p pem special-surface mount standoff | 3880 |
| |
| AEROSPCE | MN | Self-Clinching Standoff | Steel | Plain | M8 | so-m4-8zi pem 8mm long thru-hole threaded standoff | 1684 |
|
| AEROSPCE | MN | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | fhs-024-6-07 pem stainless stud / passivated see plai | 1350 |
| |
| AEROSPCE | MN | 97-50-323-12 southco over-center draw | 1000 |
| ||||
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain | #0 | s-0428-2zi pem self-clinching nut heat treated | 3000 |
| |
| AEROSPCE | MN | Round Spacer | Steel | Plain | 1/4 | 1/4 round spacer | 2000 |
|
| F. Solutions | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1/2 | phillips flat machine screw 5/16-18x1/2 18.8 | 150 |
|
| F. Solutions | OH | Hex Tap Bolt (Fully Threaded) | 316, 317, A4 Stainless | Plain | hex head tap bolt (ft) 5/16-18 x 2 316 ss | 400 |
| |
| F. Solutions | OH | Hex Head Cap Screw | ASTM A320 L7, L7M | Plain | 3/4-10 x 1 1/2 | heavy hex head cap screw 3/4-10x1-1/2 a320 l7m | 8 |
|
| Wurth Ind | IN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Black | 8 x 1/4 | hex washer head type-ab sheet metal screw st bz slotted 8x1/4 steel zinc/black | 523 |
|
| Wurth Ind | IN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1 | hex head machine screw 10-32x1 300 stainless (a1,a2, 18-8,304,310 etc.) plain | 138087 |
|
| Wurth Ind | IN | Hex Head Cap Screw | Grade 8 | Plain | 3/8-24 x 1 1/2 | hex cap screw grade 8 pl 3/8-24x1 1/2 plain | 1301 |
|
| Wurth Ind | IN | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M30 x 110 | hex head cap screw class 10.9 ws46 a2k m30x110 zinc/clear iso 4014 | 580 |
|
| National | Ont | Machine Screw | Steel | Zinc/Clear | mKa40 x 10 | k40 x 10 pan torx plus (t20ip) steel zinc | 200 |
|
| WINA | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain | M8 x 1 | truss head type-a sheet metal screw st bo ph 8x1 | 5000 |
|
| Mansco | MI | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Zinc/Clear | 3/8 x 3 | 3/8x3 hxwa tapcon ldt concrete screw anchor znc | 44 |
|
| Mansco | MI | Grommets & Eyelets | 3 x 1 x 2 3/4 | 3x1 x 2-3/4 round grommet set w/textured cap abs black | 500 |
| ||
| Mansco | MI | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 1 1/4-7 x 2 3/4 | str/b a325 | 126 |
|
| Mansco | MI | Flat Washer | Steel | Zinc/Clear | 3/16 x 1.156 | 3/16x1.156 x-washer pin triv znc | 200 |
|
| AFI | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 | #6 flat washer ge ss 153x437x040 () () | 3442 |
|
| AFI | FL | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1/2 | 8-32x1/2 phil pan ext sems ss () () | 1785 |
|
| AFI | FL | Semi-Tubular Rivet | Aluminum | Plain | .089 x .156 | s-t rivet oval head steel cad yellow () | 895 |
|
| Global Fa | TX | gs 43 brass stimpson gs-43 | 800 |
| ||||
| Olander | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6-40 x 3/8 soc cap sst rohs | 92 |
| |
| Olander | CA | Button Head Socket Cap Screw | Steel | Plain | 1/2-13 x 1 3/4 but soc alloy | 5 |
| |
| Olander | CA | Machine Screw | Brass | Plain | 6-32 x 1/2 slot flat br pln | 464 |
| |
| Olander | CA | Round Spacer | Nylon (Polyamide) | Plain | #4 x 5/16 x 1/4 rd spacer nylon | 395 |
| |
| Olander | CA | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 phil pan ext sems sst rohs | 608 |
| |
| Olander | CA | Solid Rivet | Aluminum | Plain | 3/32 x 3/8 100 deg countersink rivet | 496 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Steel | Zinc/Clear | 6-32 locking tgls heli-coil ins rohs | 600 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | M6-1.00 | 1084-6cnpf150 m6-1 f/r heli-coil ins primer free () () | 1000 |
| ||
| Mansco | MI | Round Spacer | Nylon (Polyamide) | Plain | .257 id x .500 od x .125 thk nylon spacer natural | 1100 |
| |
| F. Solutions | OH | High Collar Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | hi collar lock 1/2 18.8 | 6 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 2017-t4 5/32 x 11/32 | 100countersink shear hd.2017-t4 alum. i/a/w rev 11 5/32 x 11/32 gold chem film mil-dtl-5541 NAS1097D5-5-5 | 30.2705 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 1/8 x 3/4 | 100countersink flush shear hd.2117-t4 alum. 1/8x3/4 (lockheed proprietary) rev. f | 69.807 |
|
| Rapid | NY | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 3 5/32 x 3/16 | univ.head 302-305 18-8 304 steel i/a/w rev 4 5/32 x 3/16 annealed passivated MS20613-5C3 | 17.1231 |
|
| Rapid | NY | Solid Rivet | Aluminum | Anodized | 1/8 x 3 | 100 degree countersink 2117-t4 aluminum i/a/w rev 3 1/8 x 3 dichromate anod.-mil-a-8625 MS20426AD4-48D | 6.3 |
|
| Rapid | NY | Semi-Tubular Rivet | Steel | Nickel Plated | .123 x 13/64 | oval head steel semi-tubular .123x13/64 nickel plate | 175 |
|
| Rapid | NY | Blind Rivet | Aluminum | Plain | x .075-.120 | flat hd stain.rivet-nut open end rev 12 6-32 thread x .075-.120 grip NAS1329C06-120 | 422 |
|
| Rapid | NY | Blind Rivet | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 3/16 x .037-.062 | univ.hd monel blind bulbed lock spindle 3/16 x .037-.062 grip i/a/w rev 8 single action NAS1919M06S01 | 72 |
|
| Parker | AZ | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Passivated | M4-0.70 x 1 | M4-0.7x18 socket head cap screw a286 hardened 160-185 ksi capable passivate 9594r made in u.s.a. | 5460 |
|
| THRDFAST | AL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10 | nf-32x2 1/2 18-8 ss phil round m/s b18.6.3 | 52 |
|
| THRDFAST | MS | Machine Screw | Steel | Zinc/Clear | #6-32 x 2 | slotted round m/s b18.6.3 | 150 |
|
| THRDFAST | FL | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain | 3/8-16 x 2 1/2 | a193 b7 hvy h/b b18.2.1 | 1 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/2-8 x 8 3/4 | astm a193 b7 all thread stud | 394 |
|
| Lightning | LA | Shoulder Bolt (Stripper Bolt) | Steel | Black Oxide | 5/16 x 2 1/2 (1/4-20) | soc sh/b blk | 50 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 5/8-11 x 4 | a193 b8m class 2 all thread stud teflon blue coated | 100 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 1 3/4-8 x 17 | astm a193 gr. b16 all thread stud | 561 |
|
| Lightning | LA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain | 5/8-11 x 2 1/4 | a325 heavy h/b plain | 802 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
